Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Best over-clock




  1. #21
    Join Date
    Nov 2008
    Posts
    66

    Default Re: Best over-clock

    Everyone should just follow the very simplified memory tweaking page..... very few adjustments required to be set manually in the Bios for great performance. At default Bios settings I was running 14+sec. Super Pi 1M. Just by reading the memory tweaking page I brought that down to 12.4 sec. A few PM's later and I'm at 11.4sec SuperPi
    1M times. My memory timings are still very looooooose with my 2 x 1gb HZ's as I have a 2 x 2 kit of G.Skills on the way and I figure the timings will need to be looser than my current HZ's.

    I've never had support as good as on this forum.... only ones even remotely close were DFI and they took hours to reply... not minutes like here.

    Kudos to Gigabyte!! Gigabyte for life!!
    Gigabyte EP45- UD3P
    E8500 Wolfdale @ 4.1ghz
    2x2gb G.Skill PC6400, DDR864, 5-4-4-12
    (3)- Samsung 320gb Spinpoint hdd's in Raid 5
    ASUS TOP 4850 w/Glaciator Fansink
    Lite-On 16x DVD x 2
    D-Tek Fuzion WB
    Thermochill PA120.2 radiator
    2x120 SFF21-F fans
    Liang D5 pump

  2. #22
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Best over-clock

    Nice to see you are having good luck in your tweaking!

    I see in the guide, and your PM, you noted you set something to zero? What is it you are setting at zero?

  3. #23
    Join Date
    Nov 2008
    Posts
    66

    Default Re: Best over-clock

    I mistyped earlier in the post.... Static tread phase adj. were all manually set to 0 (vs. Auto in bios). I mistyped and said I said I set Static Tread to 0..... that was set to 9. I tried to set it to 7 and rig did not seem to care for that too much.

    I'll fix my typo...
    Last edited by cdelong; 11-25-2008 at 03:32 AM. Reason: typo
    Gigabyte EP45- UD3P
    E8500 Wolfdale @ 4.1ghz
    2x2gb G.Skill PC6400, DDR864, 5-4-4-12
    (3)- Samsung 320gb Spinpoint hdd's in Raid 5
    ASUS TOP 4850 w/Glaciator Fansink
    Lite-On 16x DVD x 2
    D-Tek Fuzion WB
    Thermochill PA120.2 radiator
    2x120 SFF21-F fans
    Liang D5 pump

  4. #24
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Best over-clock

    You can leave them as Auto, zero would be a manual setting and may cause issues. Sometimes Zero is Auto, and sometimes not.....

    Of course you can test and find any setting useful, but just keep in mind you did set it if you have issues later so you dont forget to see if that is the problem

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •