Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: Q6600 3.6 + EP45-DS3R + OCZ Reaper 1200MHz




  1. #1
    Join Date
    Nov 2008
    Posts
    3

    Default Q6600 3.6 + EP45-DS3R + OCZ Reaper 1200MHz

    Hello,
    I have the folowing configuration on my pc :

    CPU : Intel Q6600 2,4 @ 3,6 (400x9)
    MB : Gigabyte EP45 - DS3R (bios ver F10)
    Mem: 2x1GB OCZ Reaper 1150 @ 1200 2,4V 5-5-5-15
    PSU : BeQuiet P7-PRO 750W
    Video: EVGA 8800GTS 320MB 500/800 @ 630/1000
    HDD : SEAGATE 7200.11 500GB

    CPU Vcore….……….......1.26..........: <<< 1.550
    CPU Termination…..... 1.200V.......: <<< AUTO
    CPU PLL…………………....1.500V.......: << AUTO
    CPU Reference.…………....0.755V.......: AUTO
    ICH Core…………...……1.100V............: <<< AUTO
    MCH Reference….…….0.800V...........; <<< AUTO
    MCH/DRAM Ref.…......0.900V...........: <<< 1.150
    ICH I/O……………….....1.500V............: <<< 1.500

    DRAM
    DRAM Voltage ……....1.800V............: <<< 2.4
    DRAM Termination .…0.900V............: <<< 1.305
    Channel A Reference 0.900V............: <<< AUTO
    Channel B Reference 0.900V............: <<< AUTO

    I need some help with the bios settings to make the memory work at 1200 stable. Now they are running at 1200mhz but not stable in PRIME95. I trayed to change MCH/DRAM Ref. to 1.305 and ICH Core to 1.200 next to 1.300 next to 1.400 but it won't help. I also changed MCH Clock Skew (ps) to 50/100/150.

    Thank you

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Q6600 3.6 + EP45-DS3R + OCZ Reaper 1200MHz

    First of all please do this >>>>

    CPU Termination…..... 1.200V.......: <<< Please set 1.25-1.45 (Auto WAY Overvolts this, same as below)

    CPU PLL…………………....1.500V.......: << Please set 1.5-1.6
    CPU Reference.…………....0.755V.......: AUTO
    ICH Core…………...……1.100V............: <<< 1.1-1.2
    MCH Reference….…….0.800V...........; <<< AUTO
    MCH/DRAM Ref.…......0.900V...........: <<< Auto
    ICH I/O……………….....1.500V............: <<< 1.500

    DRAM
    DRAM Voltage ……....1.800V............: <<< 2.4 << Is your ram rated to take this much voltage?

    DRAM Termination .…0.900V............: <<< Auto
    Channel A Reference 0.900V............: <<< AUTO
    Channel B Reference 0.900V............: <<< AUTO


    I need your full settings to best advise, but the above settings need to be changed. Please fill this out with your exact settings, and link me to your ram if you can.... Thanks! >>>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: 
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 
    PCI Express Clock Drive.................: <<< 
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  3. #3
    Join Date
    Nov 2008
    Posts
    3

    Default Re: Q6600 3.6 + EP45-DS3R + OCZ Reaper 1200MHz

    Thank You very much for Your advice.
    I have made some changes to the bios settings, but still one of the cores goes red in PRIME95. You were right - ram can't take so much voltage. I changed ram to 2.3V and now it's much better but still i have problems with stability.


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ................[Auto]
    CPU Clock Ratio ........................[ 9 X]
    CPU Frequency ..........................3.60GHz( 400x9)

    ********** Clock Chip Control **********
    >>>>> Standard Clock Control
    CPU Host Clock Control..................[Enabled]
    CPU Host Frequency (Mhz) ...............[ 400]
    PCI Express Frequency (Mhz) ............[100]
    C.I.A.2 ......................................[Disabled]
    >>>>> Advanced Clock Control
    > Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................[ 800mV]
    PCI Express Clock Drive.................[ 900mV]
    CPU Clock Skew (ps).....................[ 0ps]
    MCH Clock Skew (ps)....................[ 0ps]

    ******** DRAM Performance Control ********
    Performance Enhance......................[Standard]
    Extreme Memory Profile (X.M.P.).........[Disabled]
    (G)MCH Frequency Latch..................[Auto]
    System Memory Multiplier .................[3.00A]
    Memory Frequency (Mhz) ................. 1200
    DRAM Timing Selectable .................[Manual]
    >>>>> Standard Timing Control
    CAS Latency Time........................[5]
    tRCD ........................................[ 5]
    tRP ..........................................[ 5]
    tRAS.........................................[ 15]
    >>>>> Advanced Timing Control
    > Advanced Timing Control
    tRRD........................................[Auto]
    tWTR......................................[Auto]
    tWR........................................[Auto]
    tRFC.......................................[Auto]
    tRTP.......................................[Auto]
    Command Rate (CMD) ................[Auto]
    Channel A Timing Settings
    Static tRead Value.........................[AUTO]
    tRD Phase0 Adjustment...................[AUTO]
    tRD Phase1 Adjustment...................[AUTO]
    tRD Phase2 Adjustment ..................[AUTO]
    tRD Phase3 Adjustment...................[AUTO]
    Trd2rd(Different Rank)....................[AUTO]
    Twr2wr(Different Rank)...................[AUTO]
    Twr2rd(Different Rank)...................[AUTO]
    Trd2wr(Same/Diff Rank)..................[AUTO]
    DiMM1 Clock Skew Control...............[AUTO]
    DiMM2 Clock Skew Control...............[AUTO]
    Channel A Driving Setting
    Driving Strength Profile ................[OC-1200]
    Data Driving Pull-Up Level..............[Auto]
    Cmd Driving Pull-Up Level...............[Auto]
    Ctrl Driving Pull-Up Level................[Auto]
    Clk Driving Pull-Up Level.................[Auto]
    Data Driving Pull-Down Level...........[Auto]
    Cmd Driving Pull-Down Level............[Auto]
    Ctrl Driving Pull-Down Level.............[Auto]
    Clk Driving Pull-Down Level..............[Auto]

    Channel B Timing Settings
    Static tRead Value.........................[AUTO]
    tRD Phase0 Adjustment...................[AUTO]
    tRD Phase1 Adjustment...................[AUTO]
    tRD Phase2 Adjustment ..................[AUTO]
    tRD Phase3 Adjustment...................[AUTO]
    Trd2rd(Different Rank)....................[AUTO]
    Twr2wr(Different Rank)...................[AUTO]
    Twr2rd(Different Rank)....................[AUTO]
    Trd2wr(Same/Diff Rank)...................[AUTO]
    DiMM1 Clock Skew Control................[AUTO]
    DiMM2 Clock Skew Control................[AUTO]
    Channel B Driving Setting
    Driving Strength Profile ....................[OC-1200]
    Data Driving Pull-Up Level..................[Auto]
    Cmd Driving Pull-Up Level...................[Auto]
    Ctrl Driving Pull-Up Level....................[Auto]
    Clk Driving Pull-Up Level.....................[Auto]
    Data Driving Pull-Down Level...............[Auto]
    Cmd Driving Pull-Down Level................[Auto]
    Ctrl Driving Pull-Down Level.................[Auto]
    Clk Driving Pull-Down Level..................[Auto]

    **** Mother Board Voltage Control ****
    Voltage Types Normal Current
    >>> CPU
    CPU Vcore.....................1.26250V.......[1.47500V]
    CPU Termination.............1.200V..........[1.460V]
    CPU PLL........................1.500V..........[1.500V]
    CPU Reference...............0.760V..........[Auto]
    >>> MCH/ICH
    MCH Core......................1.100V..........[1.200V]
    MCH Reference...............0.760V..........[Auto]
    MCH/DRAM Reference......0.900V..........[Auto]
    ICH I/O.........................1.500V..........[1.500V]
    >>> DRAM
    DRAM Voltage................1.800V..........[2.300V]
    DRAM Termination...........0.900V..........[Auto]
    Channel A Reference.......0.900V..........[Auto]
    Channel B Reference.......0.900V..........[Auto]
    Advanced Settings
    CPU Multi-Threading..........................[Enabled]
    Limit CPUID Max. to 3........................[Disabled]
    No-Execute Memory Protect...............[Enabled]
    CPU Enhanced Halt (C1E)..................[Disabled]
    CPU Thermal Monitor 2(TM2) .............[Enabled]
    CPU EIST Function...........................[Disabled]
    Virtualization Technology..................[Enabled]
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Q6600 3.6 + EP45-DS3R + OCZ Reaper 1200MHz

    Try this and see if it helps >>>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ................[Auto]
    CPU Clock Ratio ........................[ 9 X]
    CPU Frequency ..........................3.60GHz( 400x9)

    ********** Clock Chip Control **********
    >>>>> Standard Clock Control
    CPU Host Clock Control..................[Enabled]
    CPU Host Frequency (Mhz) ...............[ 402]
    PCI Express Frequency (Mhz) ............[100]
    C.I.A.2 ......................................[Disabled]
    >>>>> Advanced Clock Control
    > Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................[ 800mV]
    PCI Express Clock Drive.................[ 900mV]
    CPU Clock Skew (ps).....................[ 50-100ps]
    MCH Clock Skew (ps)....................[ 50-150ps]

    ******** DRAM Performance Control ********
    Performance Enhance......................[Standard]
    Extreme Memory Profile (X.M.P.).........[Disabled]
    (G)MCH Frequency Latch..................[Auto]
    System Memory Multiplier .................[3.00A] << try 2.66D for 1069 for now to see if strap or ram speed is your issue
    Memory Frequency (Mhz) ................. 1200
    DRAM Timing Selectable .................[Manual]

    >>>>> Standard Timing Control
    CAS Latency Time........................[5]
    tRCD ........................................[ 5]
    tRP ..........................................[ 5]
    tRAS.........................................15/18

    >>>>> Advanced Timing Control
    > Advanced Timing Control
    tRRD........................................3-5
    tWTR......................................3-6
    tWR........................................4-8
    tRFC.......................................38-46
    tRTP.......................................3-5
    Command Rate (CMD) ................2

    Channel A Timing Settings
    Static tRead Value.........................6/7-10 (400 MCH will take 9-12)
    tRD Phase0 Adjustment...................[AUTO]
    tRD Phase1 Adjustment...................[AUTO]
    tRD Phase2 Adjustment ..................[AUTO]
    tRD Phase3 Adjustment...................[AUTO]
    Trd2rd(Different Rank)....................[AUTO]
    Twr2wr(Different Rank)...................[AUTO]
    Twr2rd(Different Rank)...................[AUTO]
    Trd2wr(Same/Diff Rank)..................[AUTO]
    DiMM1 Clock Skew Control...............[AUTO]
    DiMM2 Clock Skew Control...............[AUTO]
    Channel A Driving Setting
    Driving Strength Profile ................[OC-1200] -1333 (Often one higher then ram speed is better)

    Data Driving Pull-Up Level..............[Auto]
    Cmd Driving Pull-Up Level...............[Auto]
    Ctrl Driving Pull-Up Level................[Auto]
    Clk Driving Pull-Up Level.................[Auto]
    Data Driving Pull-Down Level...........[Auto]
    Cmd Driving Pull-Down Level............[Auto]
    Ctrl Driving Pull-Down Level.............[Auto]
    Clk Driving Pull-Down Level..............[Auto]

    Channel B Timing Settings
    Static tRead Value.........................6/7-10 (400 MCH will take 9-12)
    tRD Phase0 Adjustment...................[AUTO]
    tRD Phase1 Adjustment...................[AUTO]
    tRD Phase2 Adjustment ..................[AUTO]
    tRD Phase3 Adjustment...................[AUTO]
    Trd2rd(Different Rank)....................[AUTO]
    Twr2wr(Different Rank)...................[AUTO]
    Twr2rd(Different Rank)....................[AUTO]
    Trd2wr(Same/Diff Rank)...................[AUTO]
    DiMM1 Clock Skew Control................[AUTO]
    DiMM2 Clock Skew Control................[AUTO]

    Channel B Driving Setting
    Driving Strength Profile ....................[OC-1200] -1333 (Often one higher then ram speed is better)

    Data Driving Pull-Up Level..................[Auto]
    Cmd Driving Pull-Up Level...................[Auto]
    Ctrl Driving Pull-Up Level....................[Auto]
    Clk Driving Pull-Up Level.....................[Auto]
    Data Driving Pull-Down Level...............[Auto]
    Cmd Driving Pull-Down Level................[Auto]
    Ctrl Driving Pull-Down Level.................[Auto]
    Clk Driving Pull-Down Level..................[Auto]

    **** Mother Board Voltage Control ****
    Voltage Types Normal Current
    >>> CPU
    CPU Vcore.....................1.26250V.......[1.47500V] You may need more, what does this give you in windows? Check with CPU-z

    CPU Termination.............1.200V..........[1.460V] << maybe less, maybe more only testing will tell. I dont think though you would need this much at only 400 FSB

    CPU PLL........................1.500V..........[1.500V]
    CPU Reference...............0.760V..........[Auto]

    >>> MCH/ICH
    MCH Core......................1.100V..........[1.200V] << Also try stock
    MCH Reference...............0.760V..........[Auto]
    MCH/DRAM Reference......0.900V..........[Auto]
    ICH I/O.........................1.500V..........[1.500V] -1.6


    >>> DRAM
    DRAM Voltage................1.800V..........[2.300V] << Try 2.2-2.3 (I would add a fan on my ram at anything over 2.1V)

    DRAM Termination...........0.900V..........[Auto]
    Channel A Reference.......0.900V..........[Auto]
    Channel B Reference.......0.900V..........[Auto]

    Advanced Settings
    CPU Multi-Threading..........................[Enabled] << Disable, this is for HT CPU's
    Limit CPUID Max. to 3........................[Disabled]
    No-Execute Memory Protect...............[Enabled]
    CPU Enhanced Halt (C1E)..................[Disabled]
    CPU Thermal Monitor 2(TM2) .............[Enabled]
    CPU EIST Function...........................[Disabled]
    Virtualization Technology..................[Enabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]

  5. #5
    Join Date
    Nov 2008
    Posts
    3

    Default Re: Q6600 3.6 + EP45-DS3R + OCZ Reaper 1200MHz

    Finally i get my full stable platform. THANKS VERY MUCH!
    Is there a chance to get FSB 500 on this board? What should I change?

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ................[Auto]
    CPU Clock Ratio ........................[ 9 X]
    CPU Frequency ..........................3.60GHz( 400x9)

    ********** Clock Chip Control **********
    >>>>> Standard Clock Control
    CPU Host Clock Control..................[Enabled]
    CPU Host Frequency (Mhz) ...............[ 400]
    PCI Express Frequency (Mhz) ............[100]
    C.I.A.2 ......................................[Disabled]
    >>>>> Advanced Clock Control
    > Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................[ 800mV]
    PCI Express Clock Drive.................[ 900mV]
    CPU Clock Skew (ps).....................[ 150ps]
    MCH Clock Skew (ps)....................[ 250ps]

    ******** DRAM Performance Control ********
    Performance Enhance......................[Standard]
    Extreme Memory Profile (X.M.P.).........[Disabled]
    (G)MCH Frequency Latch..................[Auto]
    System Memory Multiplier .................[3.00A]
    Memory Frequency (Mhz) ................. 1200
    DRAM Timing Selectable .................[Manual]

    >>>>> Standard Timing Control
    CAS Latency Time........................[5]
    tRCD ........................................[ 5]
    tRP ..........................................[ 5]
    tRAS.........................................[15]

    >>>>> Advanced Timing Control
    > Advanced Timing Control
    tRRD........................................[AUTO]
    tWTR......................................[AUTO]
    tWR........................................[AUTO]
    tRFC.......................................[AUTO]
    tRTP.......................................[AUTO]
    Command Rate (CMD) ................[AUTO]

    Channel A Timing Settings
    Static tRead Value.........................[AUTO]
    tRD Phase0 Adjustment...................[AUTO]
    tRD Phase1 Adjustment...................[AUTO]
    tRD Phase2 Adjustment ..................[AUTO]
    tRD Phase3 Adjustment...................[AUTO]
    Trd2rd(Different Rank)....................[AUTO]
    Twr2wr(Different Rank)...................[AUTO]
    Twr2rd(Different Rank)...................[AUTO]
    Trd2wr(Same/Diff Rank)..................[AUTO]
    DiMM1 Clock Skew Control...............[AUTO]
    DiMM2 Clock Skew Control...............[AUTO]
    Channel A Driving Setting
    Driving Strength Profile ................[AUTO]

    Data Driving Pull-Up Level..............[Auto]
    Cmd Driving Pull-Up Level...............[Auto]
    Ctrl Driving Pull-Up Level................[Auto]
    Clk Driving Pull-Up Level.................[Auto]
    Data Driving Pull-Down Level...........[Auto]
    Cmd Driving Pull-Down Level............[Auto]
    Ctrl Driving Pull-Down Level.............[Auto]
    Clk Driving Pull-Down Level..............[Auto]

    Channel B Timing Settings
    Static tRead Value.........................[AUTO]
    tRD Phase0 Adjustment...................[AUTO]
    tRD Phase1 Adjustment...................[AUTO]
    tRD Phase2 Adjustment ..................[AUTO]
    tRD Phase3 Adjustment...................[AUTO]
    Trd2rd(Different Rank)....................[AUTO]
    Twr2wr(Different Rank)...................[AUTO]
    Twr2rd(Different Rank)....................[AUTO]
    Trd2wr(Same/Diff Rank)...................[AUTO]
    DiMM1 Clock Skew Control................[AUTO]
    DiMM2 Clock Skew Control................[AUTO]

    Channel B Driving Setting
    Driving Strength Profile ....................[AUTO]

    Data Driving Pull-Up Level..................[Auto]
    Cmd Driving Pull-Up Level...................[Auto]
    Ctrl Driving Pull-Up Level....................[Auto]
    Clk Driving Pull-Up Level.....................[Auto]
    Data Driving Pull-Down Level...............[Auto]
    Cmd Driving Pull-Down Level................[Auto]
    Ctrl Driving Pull-Down Level.................[Auto]
    Clk Driving Pull-Down Level..................[Auto]

    **** Mother Board Voltage Control ****
    Voltage Types Normal Current
    >>> CPU
    CPU Vcore.....................1.26250V.......[1.50000V]

    CPU Termination.............1.200V..........[1.300V]

    CPU PLL........................1.500V..........[1.500V]
    CPU Reference...............0.760V..........[Auto]

    >>> MCH/ICH
    MCH Core......................1.100V..........[1.400V]
    MCH Reference...............0.760V..........[Auto]
    MCH/DRAM Reference......0.900V..........[Auto]
    ICH I/O.........................1.500V..........[1.500V]


    >>> DRAM
    DRAM Voltage................1.800V..........[2.100V]
    DRAM Termination...........0.900V..........[Auto]
    Channel A Reference.......0.900V..........[Auto]
    Channel B Reference.......0.900V..........[Auto]

    Advanced Settings
    CPU Multi-Threading..........................[Disabled]
    Limit CPUID Max. to 3........................[Disabled]
    No-Execute Memory Protect...............[Enabled]
    CPU Enhanced Halt (C1E)..................[Disabled]
    CPU Thermal Monitor 2(TM2) .............[Enabled]
    CPU EIST Function...........................[Disabled]
    Virtualization Technology..................[Enabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Q6600 3.6 + EP45-DS3R + OCZ Reaper 1200MHz

    Hmm, not sure if Q660 will do 500 FSB? Glad to see you are stable

    If you would like suggestions anyway for 500 FSB let me know and I will post you some later, sorry I am on my way out the door. I can say, that many Auto's wont likely get you very far, and are likely hurting your performance right now as well.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •