Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 28

Thread: P45-DS4, E8400 & ReaperX PC8000-2x2gb benchmarked




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: P45-DS4, E8400 & ReaperX PC8000-2x2gb benchmarked

    Cold boot issues and or S3 failure can be many thing, normally some voltages. I'd need to see what works and what does not work for you to advise better.

    And ya more MCH will allow tighter tRD for sure, what strap was you using in the above mentioned tests you ran as that also is a huge factor

  2. #12
    Join Date
    Oct 2008
    Posts
    45

    Default Re: P45-DS4, E8400 & ReaperX PC8000-2x2gb benchmarked

    I am using 2.00d strap, on both my 9x400 and 8x500 profile.
    S3 works proper on 9x400 for a while now, settings are shown in the benchmark-screenshot.

    I current have to run the settings shown in the 8x500 benchmark, to prevent me getting stuck in a reboot loop when rebooting from windows, or avoid problems when switching profile.
    However, with this tRD10 S3 still doesnt work for me.

    So for 9x400 it's fine, my 8x500 just has issues...
    Getting it to work @ 9x400 was a matter of setting performance enhancer to Standard, but with 8x500 i'm (ofcourse) also running standard.

    Would love to see 8x500 working @ tRD 9 (since it's 100% stressstable) without any issues!
    Last edited by MadDoGz; 11-24-2008 at 04:52 AM.
    Primairy system: GA-EP45-DS4 / E8400 C0 / 2x2GB OCZ ReaperX PC8000 / Sapphire HD5870 / Creative Xfi Xtrememusic PCI / Intel Postville 160GB for OS & Programs / Antec Neopower 650w / Antec 900 / Windows7x64pro RTM (build7600)

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: P45-DS4, E8400 & ReaperX PC8000-2x2gb benchmarked

    Well, let's see what you are trying for 8x500 and I will see if I can help you get it stable

  4. #14
    Join Date
    Oct 2008
    Posts
    45

    Default Re: P45-DS4, E8400 & ReaperX PC8000-2x2gb benchmarked

    Let me hear if u have some suggestions, or need some info.
    Primairy system: GA-EP45-DS4 / E8400 C0 / 2x2GB OCZ ReaperX PC8000 / Sapphire HD5870 / Creative Xfi Xtrememusic PCI / Intel Postville 160GB for OS & Programs / Antec Neopower 650w / Antec 900 / Windows7x64pro RTM (build7600)

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: P45-DS4, E8400 & ReaperX PC8000-2x2gb benchmarked

    Well......


    Post for me what you are using and I will see if I can advise you some things to try

  6. #16
    Join Date
    Oct 2008
    Posts
    45

    Default Re: P45-DS4, E8400 & ReaperX PC8000-2x2gb benchmarked

    Filled in your template, guess thats what u wanted me to do :)
    Settings below are memtest/orthosstable, just the booting issues and S3 issue... :(


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: AUTO
    CPU Clock Ratio ..........................: 8X
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 4GHz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 500 Mhz
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< default
    PCI Express Clock Drive.................: <<< default
    CPU Clock Skew (ps)....................: <<< 0
    MCH Clock Skew (ps)...................: <<< 0


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00d
    Memory Frequency (Mhz) ..............: 800 / 1000
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 15

    Advanced Timing Control
    tRRD........................................... 3
    tWTR.......................................... 3
    tWR............................................ 6
    tRFC........................................... 54
    tRTP........................................... 3
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ Auto (tried all settings)

    Channel A
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto (tried to work with diffent skews)
    Dimm2 Clock Skew Control...............:Auto (" ")

    Channel B
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.375v
    CPU Termination…..... 1.200V*.......: 1.34v
    CPU PLL…………………....1.500V*.......: << 1.5v
    CPU Referen.…………....0.755V*.......: <<< AUTO
    CPU Reference2………,,0.800V*.......:<<< AUTO

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.32v (been as high as 1.36v)
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.0v (tried 2.1v)
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: enabled (tried disable)
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: enabled (tried disable)
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB</pre>
    Primairy system: GA-EP45-DS4 / E8400 C0 / 2x2GB OCZ ReaperX PC8000 / Sapphire HD5870 / Creative Xfi Xtrememusic PCI / Intel Postville 160GB for OS & Programs / Antec Neopower 650w / Antec 900 / Windows7x64pro RTM (build7600)

  7. #17
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: P45-DS4, E8400 & ReaperX PC8000-2x2gb benchmarked

    Try these changes to see if you can get S3 and or tRD 9 stable

    CPU Clock Skew (ps)....................: <<< 50-150
    MCH Clock Skew (ps)...................: <<< 150-250


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00d
    Memory Frequency (Mhz) ..............: 800 / 1000
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 18

    Advanced Timing Control
    tRRD........................................... 3-4
    tWTR.......................................... 3-4
    tWR............................................ 6
    tRFC........................................... 54-56
    tRTP........................................... 3-4
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ 800-1200

    Channel A
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto (tried to work with diffent skews)
    Dimm2 Clock Skew Control...............:Auto (" ")

    Channel B
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.375v
    CPU Termination…..... 1.200V*.......: 1.34v <<< Try 1.36-1.38
    CPU PLL…………………....1.500V*.......: << 1.5v
    CPU Referen.…………....0.755V*.......: <<< AUTO
    CPU Reference2………,,0.800V*.......:<<< AUTO

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.32v (been as high as 1.36v)
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.55-1.65
    ICH Core…………...……1.100V............: <<< 1.14-1.25

    DRAM
    DRAM Voltage ……....1.800V............: 2.0v (tried 2.1v)
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: disabled
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: disabled

  8. #18
    Join Date
    Oct 2008
    Posts
    45

    Default Re: P45-DS4, E8400 & ReaperX PC8000-2x2gb benchmarked

    Earlier tried all those settings, did it again now just to ensure...
    no succes tho

    What gets my attention is that cold boot and standby issue seem related.
    Since both are gone for 3.6Ghz...
    Primairy system: GA-EP45-DS4 / E8400 C0 / 2x2GB OCZ ReaperX PC8000 / Sapphire HD5870 / Creative Xfi Xtrememusic PCI / Intel Postville 160GB for OS & Programs / Antec Neopower 650w / Antec 900 / Windows7x64pro RTM (build7600)

  9. #19
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: P45-DS4, E8400 & ReaperX PC8000-2x2gb benchmarked

    Hmm, see if you get stable at 499FSB instead of 500, you may just have to use 9x450 for 4Ghz as it's memory multi may be a bit more stable then what you are trying with 8x500

  10. #20
    Join Date
    Oct 2008
    Posts
    45

    Default Re: P45-DS4, E8400 & ReaperX PC8000-2x2gb benchmarked

    i've been trying to run it with a fsb of 1-2 lower, no succes.
    I won't be doing 445/450 fsb here because i cant get any descent ram speeds there (tested with several timings, 5-4-4-15(12?) were the tightest primairy timings i could achieve, tRD 9 was tightest here.
    Overal performance on ram turned out to be like 20% less, so thats a choice which is rather simple made.

    Guess my only hope for 8x500 without issues lies within a future BIOS update, that MIGHT bring fixes related to this.

    Will be running 9x400 fully stable without issues for now, with 8x500 @ tRD10 / S1 available for switch.
    Primairy system: GA-EP45-DS4 / E8400 C0 / 2x2GB OCZ ReaperX PC8000 / Sapphire HD5870 / Creative Xfi Xtrememusic PCI / Intel Postville 160GB for OS & Programs / Antec Neopower 650w / Antec 900 / Windows7x64pro RTM (build7600)

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •