Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 10 of 10

Thread: GA-P35-DS3 BSODs




  1. #1
    Join Date
    Mar 2008
    Posts
    7

    Default GA-P35-DS3 BSODs

    E6750
    GA-P35-DS3 (rev. 1.0)
    G.SKILL 4096MB GBPK
    ALBATRON 8800GTS 320MB
    WD 640GB
    WD 320GB
    Freezer 7 Pro
    Bios F12
    Vista Ultimate x64 SP1

    Hey all,
    couple of weeks a go i bought a new hard drive (wd640g) and
    some new ram (G.SKILL 4096MB GBPK). ver since im having some bad issues with my system. Every now and then im getting a BSOD (in a middle of a game or when im playing a movie). First thing i did was to memtest my ram, after 16 hours everything was ok, then i scaned my harddrive, no bad sectors.
    then i turned to my bios .. hoping to find something wrong..tried a few things but it didn't helped. last night i updated my bios to a new beta f14c but now i got another BSOD. all my BSOD are reffering to Probably caused by : dxgkrnl.sys ( dxgkrnl+bb06e ) but im pretty convinced its not video card releted. Just to be sure i've installed a few more NVIDIA versions after a safe mode cleanup including the new 180.48, still no go.
    Even tried to install a new os..
    I'll post here my BIOS settings and my memory dmp,
    i'm clueless.... any help will be appreciated.

    Thanks all

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: auto
    CPU Clock Ratio ..........................: x8
    Fine CPU Clock Ratio.....................:.?
    CPU Frequency ...........................: 2.666


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:auto
    S.M.A.R.T Enabled
    C.I.A.2 .................................:[Disabled]


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....:
    (G)MCH Frequency Latch...............:
    System Memory Multiplier ..............: auto
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12

    Advanced Timing Control
    tRRD..........................................auto
    tWTR..........................................auto
    tWR............................................aut o
    tRFC...........................................aut o
    tRTP...........................................aut o
    Command Rate (CMD) ....................:?

    Driving Strength Profiles
    Driving Strength ............................


    Motherboard Voltage Control
    Voltage Type.... Manual
    DDR2 Overvoltage Control....................+0.3
    PCI-E Overvoltage Control....................+0.1
    FSB Overvoltage Control......................+0.1
    (G)MCH Overvoltage Control..................+0.1
    CPU Voltage Control.............................1.3000

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Disabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Disabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Enabled]
    Attached Files Attached Files

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35-DS3 BSODs

    Do you have X-FI card? Just wondering....

    Where you should start is reinstalling the latest DirectX 10 >>>>
    Download details: DirectX Redist (November 2008)

    And be sure you have installed all Vista updates as well.

    4GB of ram does need some adjustments, and usually Auto does not cut it despite what values you see in the BIOS you should manually set things.

    Try this >>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: auto or fast
    CPU Clock Ratio ..........................: x8
    CPU Frequency ...........................: 2.666


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:100
    S.M.A.R.T Enabled
    C.I.A.2 .................................:[Disabled]


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....:Disabled
    (G)MCH Frequency Latch...............:Auto (Your BIOS has this??)
    System Memory Multiplier ..............: 2.40B or 2.40
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12

    ^^ is your ram 444-12 ram? ^^^

    Just checking, can you give me link anyway to check warrantied voltages?

    Advanced Timing Control
    tRRD..........................................3-4
    tWTR..........................................3-6
    tWR............................................4-6
    tRFC...........................................52-62
    tRTP...........................................3-5
    Static tRead Value_______________ 7-10
    Static tRead Phase Adjust________ [Auto] << Always Auto

    Driving Strength Profiles
    Driving Strength ............................ Set to 800-1066, I find one above ram speed to be best


    Motherboard Voltage Control
    Voltage Type.………... Manual
    DDR2 Overvoltage Control....................+0.3
    PCI-E Overvoltage Control....................+0.1
    FSB Overvoltage Control......................+0.1
    (G)MCH Overvoltage Control..................+0.1 << 2x2GB usually needs +0.2-0.3V
    CPU Voltage Control.............................1.3000

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Disabled] << Enable
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Disabled] << Enable FOR SURE
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Enabled]

  3. #3
    Join Date
    Mar 2008
    Posts
    7

    Default Re: GA-P35-DS3 BSODs

    hey Lsdmeasap and thanks for your replay. After posting yesterday i did a full night with the above settings in memtest and to my surprise it returned errors. (what didn't happened last time). I'll give it another night after i'll configure my bios right. If that will give me errors i'll check each stick seperetly.

    I pasted your msg to make things easier.

    Do you have X-FI card? no (i've read in the forum that there's some kind of conflict)

    reinstalling the latest DirectX 10 - Done

    And be sure you have installed all Vista updates as well. Done


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: auto
    CPU Clock Ratio ..........................: x8
    CPU Frequency ...........................: 2.666

    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:100
    S.M.A.R.T Enabled
    C.I.A.2 .................................:[Disabled]

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....:Disabled
    (G)MCH Frequency Latch...............:Auto (Your BIOS has this?? no)
    System Memory Multiplier ..............: 2.40
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12

    ^^ is your ram 444-12 ram? yes

    Just checking, can you give me link anyway to check warrantied voltages?
    F2-6400CL4D-4GBPK

    Advanced Timing Control
    I've changed all the next settings to the ones that were writing in my bios (from auto)
    tRRD..........................................3
    tWTR..........................................3
    tWR............................................6
    tRFC...........................................52
    tRTP...........................................3
    Static tRead Value_______________ 7 (my bios had 6 written here next to auto, but i entered 7 like you suggested)
    Static tRead Phase Adjust________ [Auto]

    Driving Strength ............................ Set to 800-1066 (don't have this)


    Motherboard Voltage Control
    Voltage Type.………... Manual
    DDR2 Overvoltage Control....................+0.3
    PCI-E Overvoltage Control....................+0.1
    FSB Overvoltage Control......................+0.1
    (G)MCH Overvoltage Control..................+0.3 +0.2
    with +0.3 my system booted a few times and changed all the settings to auto
    CPU Voltage Control.............................1.3000

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled ]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Enabled]
    Last edited by Shasoosh; 11-23-2008 at 04:14 AM.

  4. #4
    Join Date
    Mar 2008
    Posts
    7

    Default Re: GA-P35-DS3 BSODs

    After a night of memtest with the above settings i got errors.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    I tried to run memtest to each stick separately in his original slot<o:p></o:p>
    and everything was working fine so the errors appear only when they<o:p></o:p>
    work together. Any idea?<o:p></o:p>

  5. #5
    Join Date
    Apr 2008
    Posts
    942

    Default Re: GA-P35-DS3 BSODs

    Have you tried your ram at 5-5-5-15/18 and at 1.9-2.1volts, to see if you can reach stability at more relaxed timings?
    Leave all the settings in Advanced memory timings to Auto, Except tRFC, set that to 56.
    GA-P35C-DS3R Rev2.0 F11 bios, E8200 (@3.0Ghz), OCZ DDR3 PC3-10666 Reaper 4GB (@1200Mhz), Xonar D1, 8800GTS 512, Corsair HX520 (Single 12volt line, Max 40A), WDC 3200aaks/5000aaks in AHCI mode, Vista 64 Premium.

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35-DS3 BSODs

    Try this, and just so you know what you see on the left is not always what you get in windows. It can be what Auto is using then, or has used in the past or any combination of both. >>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    System Memory Multiplier ..............: 2.40
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12

    Advanced Timing Control
    tRRD..........................................3
    tWTR..........................................4
    tWR............................................6
    tRFC...........................................54
    tRTP...........................................3
    Static tRead Value_______________ 8
    Static tRead Phase Adjust________ [Auto]


    Motherboard Voltage Control
    Voltage Type.………... Manual
    DDR2 Overvoltage Control....................+0.3
    PCI-E Overvoltage Control....................+0.1
    FSB Overvoltage Control......................+0.1
    (G)MCH Overvoltage Control..................+0.25

  7. #7
    Join Date
    Mar 2008
    Posts
    7

    Default Re: GA-P35-DS3 BSODs

    Hello VorLonUK and thanks for your replay. My system is stable with 5-5-5-15, my problem is with 4-4-4-12.
    Lsdmeasap, you sure i can: (G)MCH Overvoltage Control....+0.25
    from what i see i can only +0.1 +0.2 +0.3

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  9. #9
    Join Date
    Mar 2008
    Posts
    7

    Default Re: GA-P35-DS3 BSODs

    with 0.3 i dont boot and my bios settings goes to auto. I managed to get my system stable with:

    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12

    Advanced Timing Control
    tRRD..........................................3
    tWTR..........................................4
    tWR............................................6
    tRFC...........................................56
    tRTP...........................................3
    Static tRead Value_______________ 8
    Static tRead Phase Adjust________ [Auto]


    Motherboard Voltage Control
    Voltage Type.………... Manual
    DDR2 Overvoltage Control....................+0.3
    PCI-E Overvoltage Control....................+0.1
    FSB Overvoltage Control......................+0.1
    (G)MCH Overvoltage Control..................+0.1

    and it passed 8 hours of memtest BUT i still get blue screens while gaming (same one mentioned in the first post). I never get bsods if i use 5-5-5-15.

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •