Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 31

Thread: GA-X58-EXTREME problems on vista x64 with easytune and energy saver




  1. #21
    Join Date
    Nov 2008
    Posts
    26

    Default Re: GA-X58-EXTREME problems on vista x64 with easytune and energy saver

    Nope , bios is with ctrl+F1 loaded settings, i guess i will wait a newer version, maybe they find the bug :)

    Os is an oem integrated version with september updates.

    Well for overclock for real must wait like 10 days the arrive of a true copper =)
    Last edited by ghigo; 11-24-2008 at 03:26 PM.
    Vista Ultimate 64 SP1
    Gigabyte X58 Extreme Bios F3 | Corsair HX1000W |
    i7 920 stock heatsink| Corsair TR3X6G1600C9 2GBX6 |ATI 4870 830/1000|Vraptor 300|Antec 900

  2. #22
    Join Date
    Nov 2008
    Location
    Vancouver, Canada
    Posts
    167

    Default Re: GA-X58-EXTREME problems on vista x64 with easytune and energy saver

    Yeah, I'm looking forward to a new BIOS as well. The board already runs really well considering it's recent realease though....

    And I didn't realize you had the stock heatsink. The TRUE copper is going to be awesome :).
    Windows 7 Pro 64 | OCZ Vertex 120 | Cosmos S
    Gigabyte P67A-UD5-B3 (F6) | Enermax Revolution85+ 1050w
    i7 2600k | 2x4 GB Corsair Vengeance 1866 | EVGA GTX570 SC
    Apogee XT | Magicool 360 Radiator | MCP35x Pump + v.2 Res

  3. #23
    Join Date
    Nov 2008
    Posts
    26

    Default Re: GA-X58-EXTREME problems on vista x64 with easytune and energy saver

    Also at begin i got a bad contact of the heatsink, thx gigabyte for the awesome temp leds for each core of the cpu, showed immediatly the problem was one side of chip going yellow/red
    Vista Ultimate 64 SP1
    Gigabyte X58 Extreme Bios F3 | Corsair HX1000W |
    i7 920 stock heatsink| Corsair TR3X6G1600C9 2GBX6 |ATI 4870 830/1000|Vraptor 300|Antec 900

  4. #24
    Join Date
    Nov 2008
    Posts
    26

    Default Re: GA-X58-EXTREME problems on vista x64 with easytune and energy saver

    Did another full install with latest MSDN build, still same problem , energy saver say my bios dont support energy saving features , et6 just crash on start , need to RMA the board ?
    Vista Ultimate 64 SP1
    Gigabyte X58 Extreme Bios F3 | Corsair HX1000W |
    i7 920 stock heatsink| Corsair TR3X6G1600C9 2GBX6 |ATI 4870 830/1000|Vraptor 300|Antec 900

  5. #25
    Join Date
    Nov 2008
    Posts
    26

    Default Re: GA-X58-EXTREME problems on vista x64 with easytune and energy saver

    Ok found others with easytune not starting on x64 is not my board but software buggy :)

    I cancelled my order for the true copper and got incoming a highend watercooling setup
    Vista Ultimate 64 SP1
    Gigabyte X58 Extreme Bios F3 | Corsair HX1000W |
    i7 920 stock heatsink| Corsair TR3X6G1600C9 2GBX6 |ATI 4870 830/1000|Vraptor 300|Antec 900

  6. #26
    Join Date
    Dec 2008
    Posts
    2

    Default Re: GA-X58-EXTREME problems on vista x64 with easytune and energy saver

    Question - 681068
    From : XXXXX [ XXXXX@XXXXX.XXXX ]
    Sent : 11/19/2008 22:35
    Question : I have three problems with Gigabyte utililties, my system is rock stable so I suspect it are bugs in the software or incompatibility with a x64 os.
    1) UpdManager 08.0917.1 claimes there are no updates while there is a new version of Easytune available.
    2) Dynamic Energy Saver Advanced 8.1110.1 claims my bios does not support it. (Halt states and EIST are enabled in the bios)
    3) Easytune 08.130.1 and cd version crash at startup:
    Probleemhandtekening:
    Gebeurtenisnaam van probleem: APPCRASH
    Naam van de toepassing: GUI.exe
    Versie van toepassing: 1.0.0.1
    Tijdstempel van toepassing: 47e8c0ab
    Naam van foutmodule: work.dll
    Versie van foutmodule: 0.0.0.0
    Tijdstempel van foutmodule: 4905b7c0
    Uitzonderingscode: c0000005
    Uitzonderingsmarge: 000048b0
    Versie van besturingssysteem: 6.0.6001.2.1.0.256.1
    Landinstelling-id: 1043
    Aanvullende informatie 1: e51a
    Aanvullende informatie 2: 4c0d4d78887f76d971d5d00f1f20a433
    Aanvullende informatie 3: e51a
    Aanvullende informatie 4: 4c0d4d78887f76d971d5d00f1f20a433

    -------------------------------------------------------------------------------
    Model Naam : GA-EX58-UD5(rev. 1.0)
    --------------------------
    Moederbord Revisie : 1.0
    BIOS Versie : F3
    Serie Nummer : XXXXXXXXXX
    Leverancier
    : XXXXXXX
    -------------------------------------------------------------------------------
    VGA Merk : EVGA Model : GTX 260 Core 216
    CPU Merk : Intel Model : Core i7 920 Snelheid : 2.66 GHz
    Operatie Systeem : Vista 64-bit Service Pack : SP1
    Geheugen Merk : G. Skill Type : DDR3
    Grootte van de Geheugen : 6144 Geheugen Snelheid : 1333
    Power Supply/Voeding : 530 W

    Answer - 681068
    Answer : Hello,
    Thank you for contacting GIGABYTE.
    Please, try to remove all of this utility's from your system, and install the new version from our website:
    http://www.gigabyte.com.tw/Support/M...lity_List.aspx
    Please let me know the result.
    I have also attached the latest Bios ver F4f for GA-EX58-UD5 MB for you reference.
    Best Regards,

    Attachment : Attach file ex58ud5.f4f ( 1024 KB ) :

    Question - 686695
    From : XXXXXX [ XXXXX@X ]
    Sent : 12/4/2008 03:33
    Question : I already had the latest utlitlies and they didn't work better then the cd versions. The new bios makes one difference, DES does no longer say that my bios does not support it, how ever it now claims DES needs te be updated. So I still can't use easytune and des. Please see attachted screenshots.
    Best Regards,
    XXXXX
    User Attached : des.jpg
    easytune.jpg

    Answer - 686695
    Answer : Hello,
    Our Engineer have tested EX58-UD5 installing DES and ET6 without any problem.
    Here is the system configuration:
    Motherboard: GA-EX58-UD5 rev 1.0
    Bios version: F4R
    CPU: INTEL I7 920
    Memory: Kingmax DDR3 FSB 1333 1 GB x 2 pcs.
    OS: Window vista 64 +SP1
    Chipset driver: Gigabyte website.
    http://www.gigabyte.com.tw/Support/M...ProductID=2958
    DES software and ET6: GBT website:
    http://www.gigabyte.com.tw/Support/M...ProductID=2958
    Test done:
    1. Install OS and chipset driver. Then check device manager.
    2. Install GBT utility DES first and check.--> OK
    - Finish installation and run DES.
    3. Install GBT ET6 and run ET6.--> OK
    Suggestion and Question:
    1. After flashing bios, can you try to clear CMOS and load optimized default.
    2. Please try the latest beta bios F4R as attached if this can help solve the problem.
    - Please load optimized default after flashing bios.
    3. What is the DES version and ET6 version you have downloaded.
    Please try again the DES and ET6 version as shown above.
    Best Regards,


    Attachment : Attach file ex58ud5.f4r ( 1024 KB ) :

    Question - 693507
    From : XXXXX [ XXXXX@X ]
    Sent : 12/19/2008 05:32
    Question : Hi,
    1) bios f4r, optimized defaults
    2) clean install Vista x64 SP1 Dutch
    3) chipset and device drivers
    4) microsoft update
    5) reboot
    6) install Energy Saver Advance B8.1208.1
    7) reboot
    8) same error (update bios)
    9) install Easy Tune 6 B08.1124.1
    10) reboot
    11) same error
    Maybe you should test localised OS, more memory or RAID. These two apps are the only ones not working, I have no other problems.
    Best Regards,
    XXXXX

    Answer - 693507
    Answer : Hello,
    I will test with the procedure you mentioned in your mail and update you soon with my results.
    Please wait for my reply. Thanks!
    Best Regards,

    Question - 696245
    From : XXXXX [ XXXXX@X ]
    Sent : 12/26/2008 19:44
    Question : There are more people with exactly the same problems:
    http://forums.tweaktown.com/f69/ga-x...y-saver-28726/
    I've tried bios f4 final aswell, problem still remains.
    I'm not using the gigabyte RAID controller, but I've got 5 drives in RAID5 on the intel matrix RAID and a SATA burner on the sixth port. (incase using RAID has something to do with the problem)
    Last edited by sWORDs; 12-26-2008 at 06:52 PM.

  7. #27
    Join Date
    Dec 2008
    Posts
    8

    Default Re: GA-X58-EXTREME problems on vista x64 with easytune and energy saver

    nice they linked the same thread that you were already looking at to try to help you, good ol' tech support
    welp im in the same boat as you, still looking for a solution

  8. #28
    Join Date
    Dec 2008
    Posts
    2

    Default Re: GA-X58-EXTREME problems on vista x64 with easytune and energy saver

    Quote Originally Posted by sorak View Post
    nice they linked the same thread that you were already looking at to try to help you, good ol' tech support
    welp im in the same boat as you, still looking for a solution
    Actually that was my reply to them. ;)

  9. #29
    Join Date
    Dec 2008
    Posts
    6

    Default Re: GA-X58-EXTREME problems on vista x64 with easytune and energy saver

    Ok sorry itís taken me a while to reply but wanted to be certain what was causing my easytune 6 and des not to work. I have a slipstream disk of vista 64 and all the apps I need, made up with a boot loader installed to get around the vista activation every time I format (regularly).so I used the original vista disk installed all the service packs and easytune 6 and des works fine, soon as I installed the boot loader same problem both fail. hope this helps a few of you guys with the same problem will have to do it the slow way and install all separately or make new slipstream disk without the boot loader.:)



  10. #30
    Join Date
    Dec 2008
    Posts
    1

    Default Re: GA-X58-EXTREME problems on vista x64 with easytune and energy saver

    hi
    i also got the DES & ET6 problem with the board.
    it's not the board for shure coz i got the same on 2 rigs with GA-EP43-DS3L mobo & one with vista 64 & the other is xp pro sp3 32bit.

    another thing though is that i need your help.
    i cannot install my vista on a raid 0 configuration.
    the vista installation says that the drivers (the CD & site) don't match the hardware & contact the vendor.

    i mailed GGTS already last week,,, no solution yet.

    but you say you have raid 5...

    did you have problems installing the os on a raid configuration?
    did you used the drivers on the cd?


    i managed to install at first Windows 7, it recognized the raid with no problem, worked really fast with 2xWD640...
    but now, nothing!!!
    i can't even load Win7 or Vista Installation!!! it halts in some places most of the time...........


    can someone help me?!?!? thanks!!!
    i'm really disappointed from this board...
    if the raid is falt... it don't worth much...

    oh,
    my rig is:
    Core i7 920 20x133 (until i manage the fix all the problems... the rig restarts a lot but i don't know if it's GTA IV or Crysis Warhead on vista 64 bit bugs or the board .)

    cooler- stock.
    Ram- OCZ 6GB 1600 Gold Triple channel cl8 @ 1.65v, ([1.66v] not stable!!!!)
    VGA- Gigabyte 4870x2 @ 790/990
    HDs:
    2 WD640, currently on IDE mode :(
    1 WD 750AYYS
    1 Seagate 250GB.
    Last edited by z_dori; 12-28-2008 at 02:48 AM. Reason: forgot some detalis

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •