Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: EP45T-DS3R freezing with OCZ3F13332G & static with Creative audio card




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45T-DS3R freezing with OCZ3F13332G & static with Creative audio card

    Great to hear all is well!!

    Ya, overclocking and or building systems is VERY addictive!

  2. #12
    Join Date
    Nov 2008
    Posts
    14

    Default Re: EP45T-DS3R freezing with OCZ3F13332G & static with Creative audio card

    I have set the timings as follows, but I still get the computer freezing and crashing. I tested with MemTest86+ for 1 pass and it resulted in no errors.

    Am I doing anything wrong here?

    Also, I installed Vista Ultimate (no SP1) with the 4GB (2x2) installed and I heard that may cause problems (see Error message when you try to install Windows Vista on a computer that uses more than 3 GB of RAM: "STOP 0x0000000A"), but it seems to be limited to crashing the installation, which obviously does not apply here because I was able to install Vista. I do now have SP1 installed.

    Any suggestions?

    Thanks,
    edsager

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3Ghz
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........: 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 0ps
    MCH Clock Skew (ps)...................: <<< 100
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Not present
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 4.00B
    
    Memory Frequency (Mhz) ..............: 1333
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................9
    tRCD .........................................9
    tRP'...........................................9
    tRAS..........................................20
    
    Advanced Timing Control
    tRRD........................................... 5
    tWTR.......................................... 7
    tWR............................................ 10
    tRFC...........................................80
    
    tRTP........................................... 5
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................ I tried the suggestion you gave, but I still do not have this setting present.  I have the latest BIOS and I did load/apply/save/reboot after I flashed the BIOS, plus, I tried the hotkey, but no luck.  [1200-1333 (1333 or above would be best) I see you say N/A, are you using the latest BIOS?  If so, did you load/apply/save/reboot after you flashed to the latest BIOS?  If not you must.  If you did, and still do not see this, please try the hotkey.  On the MAIN page of the BIOS hit control + F1 and the screen will flash, then go into MIT and see if you see this]
    
    Channel A
    Static tRead Value.........................:10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Not present
    Dimm2 Clock Skew Control...............:Not present
    
    Channel B
    Static tRead Value.........................:10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Not present
    Dimm2 Clock Skew Control...............:Not present
    
    Motherboard Voltage Control
    Voltage Type.………... Not present
    CPU
    CPU Vcore….……….........................: Auto
    CPU Termination…..... 1.200V*.......: 1.200V
    CPU PLL…………………....1.500V*.......: 1.500V
    
    CPU Referenc.…………....0.755V*.......: 0.760 (.64% Of Termination above=0.768) 
    
    CPU Reference2………,,0.800V*.......:Not present 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: 1.240
    MCH Reference….…….0.800V...........: 0.800V
    MCH/DRAM Ref.…......0.900V...........: 0.860 (next voltage up is 0.930)
    ICH I/O……………….....1.550V............: 1.570
    ICH Core…………...……1.100V............: Not present
    
    DRAM
    DRAM Voltage ……....1.800V............: 1.720
    DRAM Termination .…0.900V............: 0.860 (next voltage up is 0.930)
    Channel A Data VReference 0.900V............: 0.860 (next voltage up is 0.930)
    Channel B Data VReference 0.900V............: 0.860 (next voltage up is 0.930)
    Channel A Address VReference 0.900V............: 0.860 (next voltage up is 0.930)
    Channel B Address VReference 0.900V............: 0.860 (next voltage up is 0.930)
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]

  3. #13
    Join Date
    Sep 2008
    Posts
    990

    Default Re: EP45T-DS3R freezing with OCZ3F13332G & static with Creative audio card

    1 pass of Memtest is not enough to verify stability, you need to ahve it running for hours. I also like to use Prime 95 for RAM testing, you can use it in Windows and browse the internet while running it. I also think it may find errors faster than Memtest.

    Also try each stick of RAM seperately to find out if one is defective.

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •