Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: Random Startup procedure

  1. #1
    Join Date
    Nov 2008

    Default Random Startup procedure

    Im currently using a GA-EP45-UD3P with only one gig of ram installed at the moment, running XP with a Q6600.

    The problem I have been having is it takes about 5-20 seconds to post and sometimes will not post at all. Then randomly will freeze at XP user login. I can not for the life of me figure out why it would be doing this. -.-

    And as well my CPU fan does not power the CPU fan, however a system fan will power the CPU fan.

    Any help is appreciated, new member and you guys come off as a knowledgeable and helpful community.

  2. #2

    Default Re: Random Startup procedure

    what your bios setting ???

    CPU fan always start about 1-2 second delay.

  3. #3
    Join Date
    Nov 2008

    Default Re: Random Startup procedure

    What do you mean by BIOS setting, the version?

    And actually what's happning is the CPU fan will spin for 1-2 seconds and then stop.

    And theres still the fact it randomly will not boot up at all.

  4. #4

    Default Re: Random Startup procedure

    your Bios setting .. ram, timing , vcore ... ect .. those stuff ... if your doesn't set right then it won't boot into window ... and did you test your ram yet ??? run memtest86+ ... need to make sure your ram is ok first.... also did you hook up 8 pin power to the board? .. right on top left of CPU ?

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    PCB Island

    Default Re: Random Startup procedure

    Please give me your full settings, and a link to your ram and how much you have (4x1 or 2x2)

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    Performance Enhance = [Standard]
    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________
    Static tRead Phase Adjust________ [Auto]
    CPU/PCIEX Clock Driving Control [800mV]
    CPU Clock Skew Control [normal]
    GMCH Clock Skew Control [Normal]
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts