Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: GA-EP45-UD3 and PWM fan headers




  1. #11
    Join Date
    Nov 2008
    Posts
    17

    Default Re: GA-EP45-UD3 and PWM fan headers

    This is an IDE device with cable connection. Jumper set to Master. Could the cable be faulty?

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-UD3 and PWM fan headers

    Ahh IDE, sorry about that I forgot pretty quick eh!

    Hmm Have you tried another cable, do you have the device on the END of the cable for master? Have you tried it in the slave position of the cable and set the jumper to that? Have you tried putting the jumper on Cable Select CS?

    Ya, cables can for sure be faulty, I would test another, then test all the things I said above

  3. #13
    Join Date
    Nov 2008
    Posts
    17

    Default Re: GA-EP45-UD3 and PWM fan headers

    lsdmeasap
    Thanks for your suggestions. I think you got somewhere. I replaced DVD/CD drive with a previous one and used slave connection on cable but left jumper to Master, re-booted and drive was found in Standard CMOS and Vista.
    So maybe the cable is faulty! Either way all at present working. Thanks for all your help and advice. Do you ever sleep?

    Ok, now I'd like your advice on MIT settings, if you wouldn't mind. Here are the present settings


    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:Auto
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3.00Ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:Auto

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800mV
    PCI Express Clock Drive.................: <<< 900mV
    CPU Clock Skew (ps)....................: <<< 0ps
    MCH Clock Skew (ps)...................: <<< 0ps


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Auto
    (G)MCH Frequency Latch...............: Auto
    System Memory Multiplier ..............: Auto
    Memory Frequency (Mhz) ..............: 1066Mhz
    DRAM Timing Selectable ................: [Auto]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS........................................15

    Set all highest first then lower later testing with memtest86+ as you go

    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................4
    tWR............................................8
    tRFC...........................................56
    tRTP...........................................4
    Command Rate (CMD) ...................0

    Driving Strength Profiles
    Driving Strength ............................Auto

    Channel A
    Static tRead Value.........................8
    tRD Phase0 Adjustment...................:<<< 0
    tRD Phase1 Adjustment...................:Auto 0
    tRD Phase2 Adjustment .................:Auto 0
    tRD Phase3 Adjustment..................:Auto 0
    Trd2rd(Different Rank)....................:Auto 8
    Twr2wr(Different Rank)...................:Auto 8
    Twr2rd(Different Rank)...................:Auto 7
    Trd2wr(Same/Diff Rank)..................:Auto 9
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    DDR Write Training………………….Auto

    Channel B
    Static tRead Value.........................8
    tRD Phase0 Adjustment...................:<<< 0
    tRD Phase1 Adjustment...................:Auto 0
    tRD Phase2 Adjustment .................:Auto 0
    tRD Phase3 Adjustment..................:Auto 0
    Trd2rd(Different Rank)....................:Auto 8
    Twr2wr(Different Rank)...................:Auto 8
    Twr2rd(Different Rank)...................:Auto 7
    Trd2wr(Same/Diff Rank)..................:Auto 9
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    DDR Write Training…………………..Auto

    Motherboard Voltage Control
    Voltage Type.………... Manual
    Load-Line Calibration………..Disabled
    CPU
    CPU Vcore….……….........................: 1.27500V Auto

    CPU Termination…..... 1.200V*.......: 1.200V Auto
    CPU PLL…………………....1.500V*.......: 1.500V Auto
    CPU Referen.…………....0.755V*.......: 0.760V Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.100V Auto

    MCH Reference….…….0.800V...........; 0.760V Auto
    MCH/DRAM Ref.…......0.900V...........: 0.900V Auto
    ICH I/O……………….....1.550V............: 1.500V Auto
    ICH Core…………...……1.100V............: 1.100V Auto

    DRAM
    DRAM Voltage ……....1.800V............: 1.800V Auto

    DRAM Termination .…0.900V............: 0.900V Auto
    Channel A Reference 0.900V............: 0.900V Auto
    Channel B Reference 0.900V............: 0.900V Auto

    Advanced BiosSettings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    __________________

    and current rig

    GA-EP45-UD3 (Bios:F4)
    Intel Core 2 Duo E6850
    4x1GB Corsair Dominator DDR2 1066MHz PC2-8500 C5
    Zalman ZM850-HP Heatpipe Cooled 850W Modular PSU
    Matrox Millennium P690 Plus LP PCIe x16
    On Board Sound
    5 x IBM/Hitachi sATA drives
    1 x DVD/CD Read|Writer
    Windows Vista Home Premium 64bit

    regards

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-UD3 and PWM fan headers

    Nice to see you found and fixed the issue!

    Here would be optimal stock settings for what you posted above >>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:Auto or FAST
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3.00Ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800mV
    PCI Express Clock Drive.................: <<< 900mV
    CPU Clock Skew (ps)....................: <<< 0ps
    MCH Clock Skew (ps)...................: <<< 50-150ps


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: Auto
    System Memory Multiplier ..............: 3.20B
    Memory Frequency (Mhz) ..............: 1066Mhz
    DRAM Timing Selectable ................: [Auto]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS........................................15

    Set all highest first then lower later testing with memtest86+ as you go

    Advanced Timing Control
    tRRD...........................................3-5
    tWTR..........................................3-6
    tWR............................................4-8
    tRFC...........................................52-62
    tRTP...........................................3-5
    Command Rate (CMD) ...................0

    Driving Strength Profiles
    Driving Strength ............................800-1200

    Channel A
    Static tRead Value.........................7-8
    tRD Phase0 Adjustment...................:<<< ** all below here on both channels change to Auto (Zero)

    tRD Phase1 Adjustment...................:Auto 0
    tRD Phase2 Adjustment .................:Auto 0
    tRD Phase3 Adjustment..................:Auto 0
    Trd2rd(Different Rank)....................:Auto 8 ** See above
    Twr2wr(Different Rank)...................:Auto 8 ** See above
    Twr2rd(Different Rank)...................:Auto 7 ** See above
    Trd2wr(Same/Diff Rank)..................:Auto 9 ** See above
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    DDR Write Training………………….Auto

    Channel B
    Static tRead Value.........................7-8
    tRD Phase0 Adjustment...................:<<< ** all below here on both channels change to Auto (Zero)

    tRD Phase1 Adjustment...................:Auto 0
    tRD Phase2 Adjustment .................:Auto 0
    tRD Phase3 Adjustment..................:Auto 0
    Trd2rd(Different Rank)....................:Auto 8 ** See above
    Twr2wr(Different Rank)...................:Auto 8 ** See above
    Twr2rd(Different Rank)...................:Auto 7 ** See above
    Trd2wr(Same/Diff Rank)..................:Auto 9 ** See above
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    DDR Write Training…………………..Auto

    Motherboard Voltage Control
    Voltage Type.………... Manual
    Load-Line Calibration………..Disabled
    CPU
    CPU Vcore….……….........................: 1.27500V Auto << More of course if you over clock later on

    CPU Termination…..... 1.200V*.......: 1.200V << Set manually, especially if you overclock
    CPU PLL…………………....1.500V*.......: 1.500V << Set manually to stock value you see
    CPU Referen.…………....0.755V*.......: 0.760V Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.100V << 1.2-1.3 for 4x1GB (maybe 1.24-1.28 would work)

    MCH Reference….…….0.800V...........; 0.760V Auto
    MCH/DRAM Ref.…......0.900V...........: 0.900V Auto
    ICH I/O……………….....1.550V............: 1.500V-1.6
    ICH Core…………...……1.100V............: 1.100V-1.2

    DRAM
    DRAM Voltage ……....1.800V............: 1.800V << Likely 2.0-2.1 Check your ram sticker and if it says 2.1 then you can use 2.0-2.1. If you cant find the info post me a link to your exact ram or tell me the model # and I will find the warrantied amount for you

    DRAM Termination .…0.900V............: 0.900V Auto
    Channel A Reference 0.900V............: 0.900V Auto
    Channel B Reference 0.900V............: 0.900V Auto

    Advanced BiosSettings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled] << Disabled if you want CPU to run full speed, or want to overclock at all

    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled] << Disabled if you want CPU to run full speed, or want to overclock at all

    Virtualization Technology................: [Enabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •