Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: Need Help overclock my PC !!!




  1. #1
    Join Date
    Nov 2008
    Posts
    4

    Default Need Help overclock my PC !!!

    Hi ...

    This is my first post and I need help about setting bios for :

    - intel E7300 with stock HSF
    - GA-EP45-UD3R
    - Corsair XMS2 DHX 4GB ( 2x2 GB )
    - OCZ 600W PSU

    Now I just leave everything to stock setting and I'm thinking about overclock to 3.0 ghz or 3.3 ghz

    Please help me ...
    Thanks

  2. #2
    Join Date
    Nov 2008
    Posts
    4

    Default Need Help overclock my PC !!!

    Please Let me know what is the info that you want? I didn't get any reply.

  3. #3
    Join Date
    Nov 2008
    Posts
    4

    Default Re: Need Help overclock my PC !!!

    This is my current bios setting

    Current Bios Settings:

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio ..........................: 10x
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 2.66hz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 266MHz
    PCI Express Frequency (Mhz) .........:100MHz

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control
    CPU Clock Drive...........................:800
    PCI Express Clock Drive.................:900
    CPU Clock Skew (ps)....................:0
    MCH Clock Skew (ps)...................:0


    DRAM Performance Control
    Performance Enhance...................: Turbo [Turbo]
    Extreme Memory Profile (X.M.P.).....:Disabled
    (G)MCH Frequency Latch...............:Auto
    System Memory Multiplier ..............: Auto
    Memory Frequency (Mhz) ..............: 800Mhz
    DRAM Timing Selectable ................: Auto


    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12

    Set all highest below first then lower later

    Advanced Timing Control
    tRRD...........................................3 Auto
    tWTR..........................................3 Auto
    tWR............................................8 Auto
    tRFC...........................................52 Auto
    tRTP...........................................3 Auto
    Command Rate (CMD) ....................0 Auto

    Channel A
    Static tRead Value.........................:7 Auto
    tRD Phase0 Adjustment...................:0 Auto
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment .................:0 Auto
    tRD Phase3 Adjustment..................:0 Auto
    Trd2rd(Different Rank)....................:6 Auto
    Twr2wr(Different Rank)...................:6 Auto
    Twr2rd(Different Rank)...................:5 Auto
    Trd2wr(Same/Diff Rank)..................:8 Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7 Auto
    tRD Phase0 Adjustment...................:0 Auto
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment .................:0 Auto
    tRD Phase3 Adjustment..................:0 Auto
    Trd2rd(Different Rank)....................:6 Auto
    Twr2wr(Different Rank)...................:6 Auto
    Twr2rd(Different Rank)...................:5 Auto
    Trd2wr(Same/Diff Rank)..................:8 Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... line calibration currently set to Enabled
    CPU
    CPU Vcore….……….........................:1.1200V Auto
    CPU Termination…..... 1.200V*.......: Auto
    CPU PLL…………………....1.500V*.......: Auto
    CPU Referen.…………....0.760V*.......: Auto
    CPU Reference2………,,I don’t see this line in bios

    MCH/ICH
    MCH Core…………….....1.100V...........: Auto
    MCH Reference….…….0.760V...........:Auto
    MCH/DRAM Ref.…......0.900V...........:Auto
    ICH I/O……………….....1.500V............:Auto
    ICH Core…………...……1.100V............:Auto

    DRAM
    DRAM Voltage ……....1.800V Auto

    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................:[Enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled]

    **************************************************

    Please help me , I can't wait for overclock my PC

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Need Help overclock my PC !!!

    Sorry for the late reply today.. Been kinda busy around the house and jumped in and out of the forum this afternoon.

    Stock cooler, Hmm your temps may get too hot? Here would be optimal setting ranges for 3.0. and see how your load temps are, if good you can try for 3.3 You will need to of course bump your Termination and vcore.

    Please link me to your exact ram so I can be sure of warrantied voltages

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [Auto or Fast]
    CPU Clock Ratio ..........................: 10x
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 2.66hz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333MHz
    PCI Express Frequency (Mhz) .........:100MHz

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control
    CPU Clock Drive...........................:800
    PCI Express Clock Drive.................:900
    CPU Clock Skew (ps)....................:0
    MCH Clock Skew (ps)...................:0


    DRAM Performance Control
    Performance Enhance...................: Standard
    Extreme Memory Profile (X.M.P.).....:Disabled
    (G)MCH Frequency Latch...............:Auto
    System Memory Multiplier ..............: 2.40B
    Memory Frequency (Mhz) ..............: 800Mhz
    DRAM Timing Selectable ................: Manual


    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12

    Set all highest below first then lower later

    Advanced Timing Control
    tRRD...........................................3-5
    tWTR..........................................3-6 (May need 12 first time setting, then go right to lower range)

    tWR...........................................4-6 (May need 14 first time setting, then go right to lower range)

    tRFC...........................................52-62
    tRTP...........................................3-5
    Command Rate (CMD) ....................2

    Channel A
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:0 Auto
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment .................:0 Auto
    tRD Phase3 Adjustment..................:0 Auto
    Trd2rd(Different Rank)....................:6 Auto
    Twr2wr(Different Rank)...................:6 Auto
    Twr2rd(Different Rank)...................:5 Auto
    Trd2wr(Same/Diff Rank)..................:8 Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:0 Auto
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment .................:0 Auto
    tRD Phase3 Adjustment..................:0 Auto
    Trd2rd(Different Rank)....................:6 Auto
    Twr2wr(Different Rank)...................:6 Auto
    Twr2rd(Different Rank)...................:5 Auto
    Trd2wr(Same/Diff Rank)..................:8 Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... line calibration currently set to Enabled << DISABLE
    CPU
    CPU Vcore….……….........................:1.1200V << You will have to find your CPU's own voltage, set high so you can for sure boot into windows and check to see the difference between what you set here and what you get in windows and keep that in mind. Maybe 1.225-1.325 for 3Ghz, will be less in windows.

    CPU Termination…..... 1.200V*.......: 1.22-1.3
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much

    CPU Referen.…………....0.760V*.......: Auto


    MCH/ICH
    MCH Core…………….....1.100V...........: 1.14-1.3
    MCH Reference….…….0.760V...........:Auto
    MCH/DRAM Ref.…......0.900V...........:Auto
    ICH I/O……………….....1.500V............:Auto
    ICH Core…………...……1.100V............:Auto

    DRAM
    DRAM Voltage ……....1.800V ...... 2.0-2.1V (2.0 will likely be fine)

    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................:[Enabled] << Must be disabled
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]<< Must be disabled
    Virtualization Technology................: [Enabled]
    Last edited by Lsdmeasap; 11-28-2008 at 01:51 PM.

  5. #5
    Join Date
    Nov 2008
    Posts
    4

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Need Help overclock my PC !!!

    K, thanks! I update my post with your ram voltages. Let me know how you get along with this

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •