Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: ga-ep4-ud3r problem




  1. #1

    Angry ga-ep4-ud3r problem

    hi I am having hardcore stability issues, computer constantly freezes in windows or during windows loadup with my setup please help me

    BIOS f4
    Motherboard;GA-EP45-UD3R
    prosesor;Core™ 2 Quad Q9450
    memori;G.SKILL 8GB DDR2 1066
    power supplai; 1000 w
    video card; palit nvidia 8800 gts 1 gb
    windows vista home premium 64 bt

  2. #2

    Default Re: ga-ep4-ud3r problem

    autosport210 hi I am having hardcore stability issues, computer constantly freezes in windows or during windows loadup with my setup please help me

    BIOS f4
    Motherboard;GA-EP45-UD3R
    prosesor;Core™ 2 Quad Q9450
    memori;G.SKILL 8GB DDR2 1066
    power supplai; 1000 w
    video card; palit nvidia 8800 gts 1 gb
    windows vista home premium 64 bt[/quote]

  3. #3

    Default Re: ga-ep4-ud3r problem

    can you give us your full bios spec .... go into most post here .. copy the template and put your number in there. .. will help

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: ga-ep4-ud3r problem

    Please give me a link to your ram, and fill this out with what you are using now and I will advise you back some ranges to try >>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: 
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 
    PCI Express Clock Drive.................: <<< 
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  5. #5

    Exclamation Re: ga-ep4-ud3r problem

    full bios spec ;


    MB Intelligent Tweaker(M.I.T.)<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p></PRE>
    Robust Graphics Booster ...............: auto <o:p></o:p></PRE>
    CPU Clock Ratio ..........................: 8x <o:p></o:p></PRE>
    Fine CPU Clock Ratio.....................:.+0.0<o:p></o:p></PRE>
    CPU Frequency ...........................: 2.66ghz 333x8<o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    <o:p> </o:p></PRE>
    Clock Chip Control <o:p></o:p></PRE>
    Standard Clock Control<o:p></o:p></PRE>
    CPU Host Clock Control..................: [disablea] <o:p></o:p></PRE>
    CPU Host Frequency (Mhz) ............: 333<o:p></o:p></PRE>
    PCI Express Frequency (Mhz) .........: 100<o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    C.I.A.2 .................................:[Disabled]<o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    <o:p> </o:p></PRE>
    Advanced Clock Control [Press Enter]<o:p></o:p></PRE>
    <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:Street w:st="on"><st1:address w:st="on">CPU Clock Drive</st1:address></st1:Street>...........................: 800 mv<o:p></o:p></PRE>
    <st1:Street w:st="on"><st1:address w:st="on">PCI Express Clock Drive</st1:address></st1:Street>.................: 900 mv<o:p></o:p></PRE>
    CPU Clock Skew (ps)....................: ops <o:p></o:p></PRE>
    MCH Clock Skew (ps)...................: ops<o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    <o:p> </o:p></PRE>
    DRAM Performance Control<o:p></o:p></PRE>
    Performance Enhance...................: [STANDARD]<o:p></o:p></PRE>
    Extreme Memory Profile (X.M.P.).....: auto <o:p></o:p></PRE>
    (G)MCH Frequency Latch...............: [Auto]<o:p></o:p></PRE>
    System Memory Multiplier ..............: auto <o:p></o:p></PRE>
    Memory Frequency (Mhz) ..............: 1066 1066<o:p></o:p></PRE>
    DRAM Timing Selectable ................: [auto]<o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    Standard Timing Control<o:p></o:p></PRE>
    CAS Latency Time........................5 auto <o:p></o:p></PRE>
    tRCD .........................................5 auto<o:p></o:p></PRE>
    tRP'...........................................5 auto<o:p></o:p></PRE>
    tRAS..........................................15 auto<o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    Advanced Timing Control<o:p></o:p></PRE>
    tRRD........................................... 4 auto<o:p></o:p></PRE>
    tWTR.......................................... 4 auto<o:p></o:p></PRE>
    tWR............................................ 13 auto<o:p></o:p></PRE>
    tRFC........................................... 68 auto<o:p></o:p></PRE>
    tRTP........................................... 4 auto<o:p></o:p></PRE>
    Command Rate (CMD) ....................: 0 auto<o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    Driving Strength Profiles<o:p></o:p></PRE>
    Driving Strength ............................<o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    Channel A<o:p></o:p></PRE>
    Static tRead Value.........................: 6 auto<o:p></o:p></PRE>
    tRD Phase0 Adjustment...................: 0 auto<o:p></o:p></PRE>
    tRD Phase1 Adjustment...................: 0 Auto<o:p></o:p></PRE>
    tRD Phase2 Adjustment .................: 0 Auto<o:p></o:p></PRE>
    tRD Phase3 Adjustment..................: 0 Auto<o:p></o:p></PRE>
    Trd2rd(Different Rank)....................: 8 Auto <o:p></o:p></PRE>
    Twr2wr(Different Rank)...................: 8 Auto <o:p></o:p></PRE>
    Twr2rd(Different Rank)...................: 7 Auto <o:p></o:p></PRE>
    Trd2wr(Same/Diff Rank)..................: 9 Auto <o:p></o:p></PRE>
    Dimm1 Clock Skew Control...............: Auto <o:p></o:p></PRE>
    Dimm2 Clock Skew Control...............: Auto <o:p></o:p></PRE>
    X ddr write training …………………………………………………… auto<o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    Channel B<o:p></o:p></PRE>
    Static tRead Value.........................: 6 auto <o:p></o:p></PRE>
    tRD Phase0 Adjustment...................: o auto<o:p></o:p></PRE>
    tRD Phase1 Adjustment...................: 0 Auto<o:p></o:p></PRE>
    tRD Phase2 Adjustment .................: 0 Auto<o:p></o:p></PRE>
    tRD Phase3 Adjustment..................: 0 Auto<o:p></o:p></PRE>
    Trd2rd(Different Rank)....................: 8 Auto <o:p></o:p></PRE>
    Twr2wr(Different Rank)...................: 8 Auto <o:p></o:p></PRE>
    Twr2rd(Different Rank)...................: 7 Auto <o:p></o:p></PRE>
    Trd2wr(Same/Diff Rank)..................: 9 Auto <o:p></o:p></PRE>
    Dimm1 Clock Skew Control...............: Auto <o:p></o:p></PRE>
    Dimm2 Clock Skew Control...............: Auto <o:p></o:p></PRE>
    X ddr write training ……………………………………………….. auto<o:p></o:p></PRE>
    <o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    Motherboard Voltage Control<o:p></o:p></PRE>
    Voltage Type.………... normal……………………….current<o:p></o:p></PRE>
    CPU<o:p></o:p></PRE>
    Load-line calibration………………………………………… disabled<o:p></o:p></PRE>
    CPU Vcore….……….........................:1.3750v auto<o:p></o:p></PRE>
    CPU Termination….......................: 1.200v auto<o:p></o:p></PRE>
    CPU PLL………………….........................: 1.500v auto<o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    CPU Referen.………….......................: 0.760v auto<o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    MCH/ICH<o:p></o:p></PRE>
    MCH Core……………......................: 1.100v auto<o:p></o:p></PRE>
    MCH Reference….……..................; 0.760v auto<o:p></o:p></PRE>
    MCH/DRAM Ref.….....................: 0.900v auto<o:p></o:p></PRE>
    ICH I/O………………......................: 1.500v auto<o:p></o:p></PRE>
    ICH Core…………...……..................: 1.100v auto<o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    DRAM<o:p></o:p></PRE>
    DRAM Voltage …….........1.800v ....: 2.000v manual<o:p></o:p></PRE>
    DRAM Termination .………………0.900.........: auto<o:p></o:p></PRE>
    Channel A Reference ……….0.900V........: auto<o:p></o:p></PRE>
    Channel B Reference ……..0.900V........: auto<o:p></o:p></PRE>
    <o:p> </o:p></PRE>
    Advanced Settings<o:p></o:p></PRE>
    Limit CPUID Max. to 3.....................: [Disabled]<o:p></o:p></PRE>
    No-Execute Memory Protect............: [Enabled]<o:p></o:p></PRE>
    CPU Enhanced Halt (C1E)................: [enabled]<o:p></o:p></PRE>
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]<o:p></o:p></PRE>
    CPU EIST Function.........................: [enabled]<o:p></o:p></PRE>
    Virtualization Technology................: [Enabled] <o:p></o:p></PRE>
    Integrated Peripherals<o:p></o:p></PRE>

  6. #6
    Join Date
    Nov 2008
    Location
    Montreal, QC, Canada
    Posts
    4

    Default Re: ga-ep4-ud3r problem

    Try to put DRAM Voltage to 2.100v instead of 2.000v. G.SKILL usually requires 2.100v for DDR PC1066 2GB modules.

  7. #7

    Exclamation Re: ga-ep4-ud3r problem

    yes I already tryed and it is still the same

  8. #8
    Join Date
    Nov 2008
    Location
    Montreal, QC, Canada
    Posts
    4

    Default Re: ga-ep4-ud3r problem

    Did you try to test it with only 2 memory modules installed in DDR1 & DDR3 slots?

  9. #9

    Exclamation Re: ga-ep4-ud3r problem

    I'm going to try it. I'ved tryed one by one on each slot and there is not a a problem but then when I use 2,3, or 4 memorys the system goes freeze......
    Last edited by autosport210; 11-29-2008 at 06:02 AM.

  10. #10

    Post Re: ga-ep4-ud3r problem

    what is the differense installed in DDR1 & DDR3 slots?<!-- / message -->

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •