Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: ep45 and corsair xms2 8500 problem at 1066




  1. #1
    Join Date
    Nov 2008
    Posts
    8

    Default ep45 and corsair xms2 8500 problem at 1066

    Hi all,
    I have the ep45-ds3 board and after I tried a million times the hyperx 8500 to make them work at 1066 I changed them with the xms2 8500 2x2gb but it seems that I have the same problem,please help me figure this out because its going to drive me crazy.
    Here are my settings:

    GIGABYTE GA-EP45_EXTREME
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster: AUTO
    CPU Clock Ratio: 8x
    Fine CPU Clock Ratio: [0.0]
    CPU Frequency: 2.66Ghz(333x8)

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control: [Disabled]
    CPU Host Frequency(Mhz): 333 Mhz
    PCI Express Frequency(Mhz): 100 Mhz
    C.I.A. 2: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive: 800mv
    PCI Express Clock Drive: 900mv
    CPU Clock Skew: 0ps
    MCH Clock Skew: 50ps

    DRAM Performance Control
    Performance Enhance: [Standard]
    Extreme Memory Profile (X.M.P.): [Disabled]
    (G)MCH Frequency Latch: [333]
    System Memory Multiplier:3.20
    Memory Frequency (Mhz):1066 Mhz
    DRAM Timing Selectable: [Manual]
    Standard Timing Control
    CAS Latency Time: 5
    tRCD: 5
    tRP: 5
    tRAS: 18 (I tried also 15)

    Advanced Timing Control [Press Enter]
    tRRD:6
    tWTR:14
    tWR:16
    tRFC:75
    tRTP:7
    Command Rate (CMD):2

    >>>>> Channel A
    Channel A Timing Settings: [Press Enter]
    Static tRead Value: 10 I've tried also 12 and 14
    tRD Phase0 Adjustment: Auto
    tRD Phase1 Adjustment: Auto
    tRD Phase2 Adjustment: Auto
    tRD Phase3 Adjustment: Auto
    Trd2rd(Different Rank).: 8
    Twr2wr(Different Rank): 8
    Twr2rd(Different Rank): 7
    Trd2wr(Same/Diff Rank): 9
    Dimm1 Clock Skew Control: Auto
    Dimm2 Clock Skew Control: Auto
    DDR3 Write Training: Auto

    Channel A Driving Settings: [Press Enter]
    Driving Strength Profile: 1066Mhz I 've tried also oc-1200

    Data Driving Pull-Up Level: AUTO
    Cmd Driving Pull-Up Level: AUTO
    Ctrl Driving Pull-Up Level: AUTO
    Clk Driving Pull-Up Level: AUTO

    Data Driving Pull-Down Level: AUTO
    Cmd Driving Pull-Down Level: AUTO
    Ctrl Driving Pull-Down Level: AUTO
    Clk Driving Pull-Down Level: AUTO

    >>>>> Channel B
    Channel B Timing Settings: [Press Enter]
    Static tRead Value: 10 I've tried also 12 and 14
    tRD Phase0 Adjustment: Auto
    tRD Phase1 Adjustment: Auto
    tRD Phase2 Adjustment: Auto
    tRD Phase3 Adjustment: Auto
    Trd2rd(Different Rank).: 8
    Twr2wr(Different Rank): 8
    Twr2rd(Different Rank): 7
    Trd2wr(Same/Diff Rank): 9
    Dimm1 Clock Skew Control: Auto ps
    Dimm2 Clock Skew Control: Auto ps
    DDR3 Write Training: Auto

    Channel B Driving Settings: [Press Enter]
    Driving Strength Profile: 1066Mhz I 've tried also oc-1200

    Data Driving Pull-Up Level: AUTO
    Cmd Driving Pull-Up Level: AUTO
    Ctrl Driving Pull-Up Level: AUTO
    Clk Driving Pull-Up Level: AUTO

    Data Driving Pull-Down Level: AUTO
    Cmd Driving Pull-Down Level: AUTO
    Ctrl Driving Pull-Down Level: AUTO
    Clk Driving Pull-Down Level: AUTO

    Motherboard Voltage Control

    CPU Vcore: 1.25v
    CPU Termination | 1.200V: v
    CPU PLL | 1.500V: v
    CPU Reference | 0.760V: v


    MCH Core | 1.100V:1.26 v
    MCH Reference | 0.900V: v
    MCH/DRAM Ref | 0.900V: v
    ICH I/O | 1.500V: v

    DRAM Voltage | 1.800V:2.1 v
    DRAM Termination | 0.900V: v
    Channel A Reference | 0.900V: v
    Channel B Reference | 0.900V: v


    Thanks in advance
    Nikos

  2. #2
    Join Date
    Nov 2008
    Posts
    8

    Default Re: ep45 and corsair xms2 8500 problem at 1066

    Sorry I forgot my specs:

    Q9400
    GA-ER45-DS3(running f9)
    Geforce GTX 260
    Vista 64x

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: ep45 and corsair xms2 8500 problem at 1066

    See if this helps you any >>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster: AUTO or FAST
    CPU Clock Ratio: 8x
    Fine CPU Clock Ratio: [0.0]
    CPU Frequency: 2.66Ghz(333x8)

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control: [Disabled]
    CPU Host Frequency(Mhz): 333 Mhz
    PCI Express Frequency(Mhz): 100 Mhz
    C.I.A. 2: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive: 800mv
    PCI Express Clock Drive: 900mv
    CPU Clock Skew: 0ps
    MCH Clock Skew: 150ps

    DRAM Performance Control
    Performance Enhance: [Standard]
    Extreme Memory Profile (X.M.P.): [Disabled]
    (G)MCH Frequency Latch: [333]
    System Memory Multiplier:3.20
    Memory Frequency (Mhz):1066 Mhz
    DRAM Timing Selectable: [Manual]
    Standard Timing Control
    CAS Latency Time: 5
    tRCD: 5
    tRP: 5
    tRAS: 18 (I tried also 15)

    Advanced Timing Control [Press Enter]
    tRRD:6 << 3-4
    tWTR:14 << 3-6
    tWR:16 << 4-8
    tRFC:75 << 52-62
    tRTP:7 << 3-5
    Command Rate (CMD):2

    >>>>> Channel A
    Channel A Timing Settings: [Press Enter]
    Static tRead Value: 10 I've tried also 12 and 14 (6/7-10 for 333/B MCH Latch)
    tRD Phase0 Adjustment: Auto
    tRD Phase1 Adjustment: Auto
    tRD Phase2 Adjustment: Auto
    tRD Phase3 Adjustment: Auto
    Trd2rd(Different Rank).: 8 << AUTO
    Twr2wr(Different Rank): 8 << AUTO
    Twr2rd(Different Rank): 7 << AUTO
    Trd2wr(Same/Diff Rank): 9 << AUTO
    Dimm1 Clock Skew Control: Auto
    Dimm2 Clock Skew Control: Auto
    DDR3 Write Training: Auto

    Channel A Driving Settings: [Press Enter]
    Driving Strength Profile: 1066Mhz I 've tried also oc-1200 800-1200

    Data Driving Pull-Up Level: AUTO
    Cmd Driving Pull-Up Level: AUTO
    Ctrl Driving Pull-Up Level: AUTO
    Clk Driving Pull-Up Level: AUTO

    Data Driving Pull-Down Level: AUTO
    Cmd Driving Pull-Down Level: AUTO
    Ctrl Driving Pull-Down Level: AUTO
    Clk Driving Pull-Down Level: AUTO

    >>>>> Channel B
    Channel B Timing Settings: [Press Enter]
    Static tRead Value: 10 I've tried also 12 and 14 (6/7-10 for 333/B MCH Latch)
    tRD Phase0 Adjustment: Auto
    tRD Phase1 Adjustment: Auto
    tRD Phase2 Adjustment: Auto
    tRD Phase3 Adjustment: Auto
    Trd2rd(Different Rank).: 8 << AUTO
    Twr2wr(Different Rank): 8 << AUTO
    Twr2rd(Different Rank): 7 << AUTO
    Trd2wr(Same/Diff Rank): 9 << AUTO
    Dimm1 Clock Skew Control: Auto ps
    Dimm2 Clock Skew Control: Auto ps
    DDR3 Write Training: Auto

    Channel B Driving Settings: [Press Enter]
    Driving Strength Profile: 1066Mhz I 've tried also oc-1200 800-1200

    Data Driving Pull-Up Level: AUTO
    Cmd Driving Pull-Up Level: AUTO
    Ctrl Driving Pull-Up Level: AUTO
    Clk Driving Pull-Up Level: AUTO

    Data Driving Pull-Down Level: AUTO
    Cmd Driving Pull-Down Level: AUTO
    Ctrl Driving Pull-Down Level: AUTO
    Clk Driving Pull-Down Level: AUTO

    Motherboard Voltage Control

    CPU Vcore: 1.25v
    CPU Termination | 1.200V: v
    CPU PLL | 1.500V: v
    CPU Reference | 0.760V: v


    MCH Core | 1.100V:1.26 v << Maybe 1.28-1.3
    MCH Reference | 0.900V: v
    MCH/DRAM Ref | 0.900V: v
    ICH I/O | 1.55

    DRAM Voltage | 1.800V:2.1 v 2.0-2.1 (Is your ram 1.9V?)
    DRAM Termination | 0.900V: v
    Channel A Reference | 0.900V: v
    Channel B Reference | 0.900V: v

  4. #4
    Join Date
    Nov 2008
    Posts
    8

    Thumbs up Re: ep45 and corsair xms2 8500 problem at 1066

    THANK YOU
    It works at last, here I write down the settings I used just for enyone who might need them

    GIGABYTE GA-EP45_EXTREME
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster: AUTO
    CPU Clock Ratio: 8x
    Fine CPU Clock Ratio: [0.0]
    CPU Frequency: 2.66Ghz(333x8)

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control: [Disabled]
    CPU Host Frequency(Mhz): 333 Mhz
    PCI Express Frequency(Mhz): 100 Mhz
    C.I.A. 2: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive: 800mv
    PCI Express Clock Drive: 900mv
    CPU Clock Skew: 0ps
    MCH Clock Skew: 150ps

    DRAM Performance Control
    Performance Enhance: [Standard]
    Extreme Memory Profile (X.M.P.): [Disabled]
    (G)MCH Frequency Latch: [333]
    System Memory Multiplier:3.20
    Memory Frequency (Mhz):1066 Mhz
    DRAM Timing Selectable: [Manual]
    Standard Timing Control
    CAS Latency Time: 5
    tRCD: 5
    tRP: 5
    tRAS: 15
    Advanced Timing Control [Press Enter]
    tRRD:3
    tWTR:3
    tWR:4
    tRFC:52
    tRTP:3

    Command Rate (CMD):2

    >>>>> Channel A
    Channel A Timing Settings: [Press Enter]
    Static tRead Value: 10
    tRD Phase0 Adjustment: Auto
    tRD Phase1 Adjustment: Auto
    tRD Phase2 Adjustment: Auto
    tRD Phase3 Adjustment: Auto
    Trd2rd(Different Rank).: 8
    Twr2wr(Different Rank): 8
    Twr2rd(Different Rank): 7
    Trd2wr(Same/Diff Rank): 9
    Dimm1 Clock Skew Control: Auto
    Dimm2 Clock Skew Control: Auto
    DDR3 Write Training: Auto

    Channel A Driving Settings: [Press Enter]
    Driving Strength Profile: 1066Mhz

    Data Driving Pull-Up Level: AUTO
    Cmd Driving Pull-Up Level: AUTO
    Ctrl Driving Pull-Up Level: AUTO
    Clk Driving Pull-Up Level: AUTO

    Data Driving Pull-Down Level: AUTO
    Cmd Driving Pull-Down Level: AUTO
    Ctrl Driving Pull-Down Level: AUTO
    Clk Driving Pull-Down Level: AUTO

    >>>>> Channel B
    Channel B Timing Settings: [Press Enter]
    Static tRead Value: 10
    tRD Phase0 Adjustment: Auto
    tRD Phase1 Adjustment: Auto
    tRD Phase2 Adjustment: Auto
    tRD Phase3 Adjustment: Auto
    Trd2rd(Different Rank).: 8
    Twr2wr(Different Rank): 8
    Twr2rd(Different Rank): 7
    Trd2wr(Same/Diff Rank): 9
    Dimm1 Clock Skew Control: Auto ps
    Dimm2 Clock Skew Control: Auto ps
    DDR3 Write Training: Auto

    Channel B Driving Settings: [Press Enter]
    Driving Strength Profile: 1066Mhz
    Data Driving Pull-Up Level: AUTO
    Cmd Driving Pull-Up Level: AUTO
    Ctrl Driving Pull-Up Level: AUTO
    Clk Driving Pull-Up Level: AUTO

    Data Driving Pull-Down Level: AUTO
    Cmd Driving Pull-Down Level: AUTO
    Ctrl Driving Pull-Down Level: AUTO
    Clk Driving Pull-Down Level: AUTO

    Motherboard Voltage Control

    CPU Vcore: 1.125v
    CPU Termination | 1.200V: v
    CPU PLL | 1.500V: v
    CPU Reference | 0.760V: v


    MCH Core | 1.100V:1.3v
    MCH Reference | 0.920V: v
    MCH/DRAM Ref | 0.920V: v
    ICH I/O | 1.570V: v

    DRAM Voltage | 1.800V:2.1 v
    DRAM Termination | 0.900V: v
    Channel A Reference | 0.900V: v
    Channel B Reference | 0.900V: v


    Thank you again you are great

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: ep45 and corsair xms2 8500 problem at 1066

    Thanks for posting back for others!

    Now you can likely lower your static tRead values to 7-9

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •