Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 30 of 30

Thread: Ga-Ep45-ud3p Bios settings newb Question




  1. #21
    Join Date
    Dec 2008
    Posts
    16

    Default Re: Ga-Ep45-ud3p Bios settings newb Question

    Ok I'll give it a try, it was 1.328 cpu vcore under load when cpu vcore was set at 1.45.

  2. #22
    Join Date
    Dec 2008
    Posts
    16

    Default Re: Ga-Ep45-ud3p Bios settings newb Question

    I kept my Vcore pretty high and start off with a low vtt from 1.42-1.48, and MCH from 1.28-1.42, started off with a 1.50 PLL to 1.61. I run 20 test on intel burn test and pass 90%. Don't know what to do to make it stable.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: fast
    CPU Clock Ratio ..........................: 8x
    CPU Frequency ...........................:3.4ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [enabled]
    CPU Host Frequency (Mhz) ............: 425
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 900mv
    PCI Express Clock Drive.................: 900mv
    CPU Clock Skew (ps)....................: 50ps
    MCH Clock Skew (ps)...................: 150ps

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 400mhz
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 850mhz
    DRAM Timing Selectable ................: [manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18


    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................4
    tWR............................................8
    tRFC...........................................62
    tRTP...........................................4
    Command Rate (CMD) ....................:2
    Driving Strength Profiles
    Driving Strength ............................1066

    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    CPU
    Load-line Calibration Disabled
    CPU Vcore….……….........................:1.46875
    CPU Termination…..... 1.200v.......: <<< 1.48
    CPU PLL…………………....1.500v.......: << 1.61

    CPU Referen.…………....0.760v.......: <<< auto


    MCH/ICH
    MCH Core…………….....1.100v...........: << 1.42
    MCH Reference….…….0.760...........; <<< auto
    MCH/DRAM Ref.…......0.900V...........: <<< auto
    ICH I/O……………….....1.500V............: <<< 1.61
    ICH Core…………...……1.100V............: <<< 1.3

    DRAM
    DRAM Voltage ……....1.000v............: 2.1
    DRAM Termination .…0.900V............: <<< auto
    Channel A Reference 0.900V............: <<< auto
    Channel B Reference 0.900V............: <<< auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]

  3. #23
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ga-Ep45-ud3p Bios settings newb Question

    Pass 90%?

    Try keeping ther Vtt less then Vcore, and less MCH

    This should help >>>
    CPU Clock Skew (ps)....................: 50ps << 150ps
    MCH Clock Skew (ps)...................: 150ps << 250ps

  4. #24
    Join Date
    Dec 2008
    Posts
    16

    Default Re: Ga-Ep45-ud3p Bios settings newb Question

    The 90% was the result from intelburntest that I passed out of 25 I believe. I change the settings around again and still failed.
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: fast
    CPU Clock Ratio ..........................: 8x
    CPU Frequency ...........................:3.4ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [enabled]
    CPU Host Frequency (Mhz) ............: 425
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 900mv
    PCI Express Clock Drive.................: 900mv
    CPU Clock Skew (ps)....................: 150ps
    MCH Clock Skew (ps)...................: 250ps

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 400mhz
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 850mhz
    DRAM Timing Selectable ................: [manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18


    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................4
    tWR............................................8
    tRFC...........................................62
    tRTP...........................................4
    Command Rate (CMD) ....................:2
    Driving Strength Profiles
    Driving Strength ............................1066

    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    CPU
    Load-line Calibration Disabled
    CPU Vcore….……….........................:1.45625
    CPU Termination…..... 1.200v.......: <<< 1.36
    CPU PLL…………………....1.500v.......: << 1.5

    CPU Referen.…………....0.760v.......: <<< auto


    MCH/ICH
    MCH Core…………….....1.100v...........: << 1.28
    MCH Reference….…….0.760...........; <<< auto
    MCH/DRAM Ref.…......0.900V...........: <<< auto
    ICH I/O……………….....1.500V............: <<< 1.5
    ICH Core…………...……1.100V............: <<< 1.2

    DRAM
    DRAM Voltage ……....1.000v............: 2.1
    DRAM Termination .…0.900V............: <<< auto
    Channel A Reference 0.900V............: <<< auto
    Channel B Reference 0.900V............: <<< auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]

  5. #25
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ga-Ep45-ud3p Bios settings newb Question

    25 Passes? WOW, that is LONG and Hot! 5-10 is good for sure, you dont want to degrade your CPU

    Maybe raise your NB/MCH ref voltage, but you will need to set that and vtt back to stock for both then manually set Vtt back to what you had, then raise MCH ref a notch after that. Do note it will raise with Vtt as you increase Vtt again, that is why they both must be at stock and and then raise Vtt back, then bump MCH Ref

    Just incase >>>

    V. 1.9
    http://www.ultimate-filez.com/files/IntelBurnTest.zip

  6. #26
    Join Date
    Dec 2008
    Posts
    16

    Default Re: Ga-Ep45-ud3p Bios settings newb Question

    Hey thanks for all the help LSD I really appreciate it, I decided to stick to 3.2ghz because its less heat underload 45c :) Heres my bios setting atm:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: fast
    CPU Clock Ratio ..........................: 8x
    CPU Frequency ...........................:3.2ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [enabled]
    CPU Host Frequency (Mhz) ............: 400
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 900mv
    PCI Express Clock Drive.................: 900mv
    CPU Clock Skew (ps)....................: 50ps
    MCH Clock Skew (ps)...................: 50ps

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 400mhz
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 800mhz
    DRAM Timing Selectable ................: [manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18


    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................4
    tWR............................................8
    tRFC...........................................62
    tRTP...........................................4
    Command Rate (CMD) ....................:2
    Driving Strength Profiles
    Driving Strength ............................1066

    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    CPU
    Load-line Calibration Disabled
    CPU Vcore….……….........................:1.375
    CPU Termination…..... 1.200v.......: <<< 1.2
    CPU PLL…………………....1.500v.......: << 1.5

    CPU Referen.…………....0.760v.......: <<< auto


    MCH/ICH
    MCH Core…………….....1.100v...........: << 1.28
    MCH Reference….…….0.760...........; <<< auto
    MCH/DRAM Ref.…......0.900V...........: <<< auto
    ICH I/O……………….....1.500V............: <<< 1.5
    ICH Core…………...……1.100V............: <<< 1.2

    DRAM
    DRAM Voltage ……....1.000v............: 2.1
    DRAM Termination .…0.900V............: <<< auto
    Channel A Reference 0.900V............: <<< auto
    Channel B Reference 0.900V............: <<< auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]

  7. #27
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ga-Ep45-ud3p Bios settings newb Question

    Well at that ram speed you can likely use this range for your timings >>>

    CAS Latency Time........................4/5
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12/15


    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-4
    tWR............................................4-8
    tRFC...........................................48-62
    tRTP...........................................3-4
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................800-1066 (Benchmark/Test both)

    MCH/ICH
    MCH Core…………….....1.100v...........: << 1.24-1.28

    DRAM
    DRAM Voltage ……....1.000v............: 2.0-2.1

  8. #28
    Join Date
    Dec 2008
    Posts
    16

    Default Re: Ga-Ep45-ud3p Bios settings newb Question

    Got my cpu to 3.42ghz by bumping up the cpu vcore to 1.512 in bios. I'm wondering which would be better 9x380 or 8x425, and which mch frequency latch is the best. Is there anything I need to change in the bios to enhance the performance?


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: fast
    CPU Clock Ratio ..........................: 9x
    CPU Frequency ...........................:3.42ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [enabled]
    CPU Host Frequency (Mhz) ............: 380
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 900mv
    PCI Express Clock Drive.................: 900mv
    CPU Clock Skew (ps)....................: 50ps
    MCH Clock Skew (ps)...................: 150ps

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 400mhz
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 760mhz
    DRAM Timing Selectable ................: [manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................4
    tRP'..........................................4
    tRAS..........................................12


    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................4
    tWR............................................8
    tRFC...........................................62
    tRTP...........................................4
    Command Rate (CMD) ....................:2
    Driving Strength Profiles
    Driving Strength ............................1066

    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    CPU
    Load-line Calibration Disabled
    CPU Vcore….……….........................:1.512
    CPU Termination…..... 1.200v.......: <<< 1.2
    CPU PLL…………………....1.500v.......: << 1.5

    CPU Referen.…………....0.760v.......: <<< auto


    MCH/ICH
    MCH Core…………….....1.100v...........: << 1.1
    MCH Reference….…….0.760...........; <<< auto
    MCH/DRAM Ref.…......0.900V...........: <<< auto
    ICH I/O……………….....1.500V............: <<< 1.5
    ICH Core…………...……1.100V............: <<< 1.1

    DRAM
    DRAM Voltage ……....1.000v............: 2.1
    DRAM Termination .…0.900V............: <<< auto
    Channel A Reference 0.900V............: <<< auto
    Channel B Reference 0.900V............: <<< auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]

  9. #29
    Join Date
    Apr 2009
    Posts
    2

    Default Re: Ga-Ep45-ud3p Bios settings newb Question

    Well just like the the thread starter

    I recently purchased a ep45-ud3p motherboard with a Intel Q6600, and a G'skill 4GB (2 x 2GB) F2-6400CL5D-4GBPQ. I also use an
    XIGMATEK HDT-S1283 120mm Rifle CPU Cooler


    Right now I am just looking for the non overclocked settings to get the system setup. This is my first post so please don't flame me

  10. #30
    kick's Avatar
    kick is offline Senior Member
    Join Date
    Feb 2009
    Location
    Europe,the wild wild west.
    Posts
    1,223

    Default Re: Ga-Ep45-ud3p Bios settings newb Question

    Quote Originally Posted by BigDaddyReg View Post
    Well just like the the thread starter

    I recently purchased a ep45-ud3p motherboard with a Intel Q6600, and a G'skill 4GB (2 x 2GB) F2-6400CL5D-4GBPQ. I also use an
    XIGMATEK HDT-S1283 120mm Rifle CPU Cooler


    Right now I am just looking for the non overclocked settings to get the system setup. This is my first post so please don't flame me

    The non o/c settings should"appear" when you connect everything up and turn it on.
    Load and save optimum defaults then...
    The only things you may/would have to change is the epp settings on your memory .The 800mhz profile.
    You could enter those settings manually,but the xmp profile (enable) should do it for you if you are on stock settings.
    Last edited by kick; 04-02-2009 at 02:47 AM.
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •