Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: EP45-UD3R Bios setup please




  1. #1
    Join Date
    Dec 2008
    Posts
    2

    Smile EP45-UD3R Bios setup please

    I'm recently replacing my computer with the following setup:

    EP45-UD3R Motherboard
    Intel Q6600 (Don't know if it's G0 or B3)
    OCZ Reaper HPC 4GB(2x2GB) PC6400 800
    Seagat 250GB SATA HD
    Artic Cooling Freezer 7 Pro CPU Cooler
    Corsair 650w PSU
    Radeon HD 4850

    Basically I want to try and OC it to 3.2GHz if possible, maybe 3.0 if 3.2 is out of range.

    The memory is CAS4 4-4-4-15 timing with 2.1v as the specs.

    Any help with setting up the bios would be great.

    Also, would it be recommended to flash the bios to f4?

    Thanks

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3R Bios setup please

    Yes, please do update your BIOS, use Qflash and be sure to load optimized defaults after you flash, please read this >>>
    http://forums.tweaktown.com/f69/bios...h-guide-27576/

    Let us know when you get setup and we will help you out.

  3. #3
    Join Date
    Dec 2008
    Posts
    2

    Default Re: EP45-UD3R Bios setup please

    Ok, I flashed my BIOS to F4. I would've had the process done earlier but UPS took their sweet time yesterday to drop off my package and I spent nearly all night setting up and installing Vista.

    I went into the BIOS and loaded the optimized defaults. I left the computer on all night and there we're no crashing so I can safely say that I don't have any faulty parts. If someone could set me up with the settings for a 3.2GHz OC, that would be great.

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3R Bios setup please

    Try this for 3.2 >>>

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 8
    CPU Frequency ...........................: 3.216
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 402Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< stock/800
    PCI Express Clock Drive.................: <<< stock/900
    CPU Clock Skew (ps)....................: <<< 50-150
    MCH Clock Skew (ps)...................: <<< 50-150-250
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00B or D, 2.00D likely easier to use but try 2.00B for sure
    
    Memory Frequency (Mhz) ..............: 804Mhz
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................15
    
    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-6
    tWR............................................4-6
    tRFC...........................................52-62
    tRTP...........................................3-5
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................800/1066 Test both last
    
    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: All up to your chip, I would say maybe 1.35-1.42 Actual, maybe more maybe less.
    
    CPU Termination…..... 1.200V*.......: <<< 1.25-1.45
    CPU PLL…………………....1.500V*.......: << Stock -1.59
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.2-1.3 (1.24-1.28 likely works)
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.55-1.6
    ICH Core…………...……1.100V............: <<< 1.1x-1.2
    
    DRAM
    DRAM Voltage ……....1.800V............: 2.0-2.1
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •