Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28

Thread: I need help to overclock a intel Q9550 on EP45-UD3P mobo




  1. #21

    Default Re: I need help to overclock a intel Q9550 on EP45-UD3P mobo

    is your Load-Line Calibration ………………….:[Disabled] ???

  2. #22
    Join Date
    Dec 2008
    Location
    Texas
    Posts
    32

    Default Re: I need help to overclock a intel Q9550 on EP45-UD3P mobo

    yes the load-line calibration is disabled

  3. #23

    Default Re: I need help to overclock a intel Q9550 on EP45-UD3P mobo

    that mean you have a very good chip ..... i'm on 3.85 and need 1.35625 to make it stable.... will try for 4 soon .... just want my chip to burn in little first ...

  4. #24
    Join Date
    Dec 2008
    Location
    Texas
    Posts
    32

    Default Re: I need help to overclock a intel Q9550 on EP45-UD3P mobo

    yeah im not to sure what the load-line calibration is for, but you said i have a good chip so i guess its good that the load line calibration is off :) and my Vcore is at 1.25 currently.

  5. #25
    Join Date
    Mar 2009
    Posts
    5

    Default Re: I need help to overclock a intel Q9550 on EP45-UD3P mobo

    i used theses settin gs to overclock my cpu, heres my rig:
    asus gtx 295
    gigabyte GA-EP45T-DS3R
    yorkfield q9550
    CORSAIR XMS3 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Dual Channel Kit Desktop Memory

    Newegg.ca - CORSAIR XMS3 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Dual Channel Kit Desktop Memory - Desktop Memory

    just let me know if theses settings arent good for my computer, thank you.
    Quote Originally Posted by Lsdmeasap View Post
    Ahh, thats all good! Gotta learn sometime

    Thanks for the link, here would be optimal settings for you to use at 3.6. CPU Voltage of course will be up to you and your chip to find

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................:.5
    CPU Frequency ...........................: 3.612
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 425Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 50-150
    MCH Clock Skew (ps)...................: <<< 150-250
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 850Mhz
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................4/5
    tRCD .........................................4/5
    tRP'...........................................4/5
    tRAS..........................................12/15
    
    ^^^ You may be able to get 544-12 or 544-15, but if not should be able to use 555-12 ^^^
    
    Advanced Timing Control
    tRRD...........................................3-5
    tWTR..........................................4-8
    tWR............................................5-10
    tRFC...........................................56-72
    tRTP...........................................4-6
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................800-1066
    
    Channel A
    Static tRead Value.........................:9-12 
    
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:9-12
    
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: All up to your chip.  Keep in mind what you set here is not what you get in windows (You can check the difference with CPU-z, but it is also not always the same and may vary at different volt ranges)......  I see some do 3.6+ on 1.24 or Less Actual, some need 1.25-1.3 or more.  So set high enough for sure to boot then you can lower later
    
    CPU Termination…..... 1.200V*.......: <<< 1.24-1.38
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.25-1.35
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.55-1.6
    ICH Core…………...……1.100V............: <<< 1.1x-1.2
    
    DRAM
    DRAM Voltage ……....1.800V............: 2.0-2.1 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  6. #26
    Join Date
    May 2011
    Location
    Over the Rainbow
    Posts
    66

    Default Re: I need help to overclock a intel Q9550 on EP45-UD3P mobo

    Hello Lsdmeasap,

    I need a little help here:

    I have Gigabyte EP45-UD3LR mobo, Intel Q9550 and these rams: Newegg.com - Kingston HyperX 4GB &#40;2 x 2GB&#41; 240-Pin DDR2 SDRAM DDR2 1066 Desktop Memory Model KHX8500D2K2&#47;4G

    Could you please give me the proper settings to me to be able to overclock this cpu on 3.4 GHZ ?

    Thanks in advance!

    hyperpower

  7. #27
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: I need help to overclock a intel Q9550 on EP45-UD3P mobo

    @hyperpower

    Would be better if you create a new thread.
    Please fill your forum sugnature with fiull system spec.
    Are you using stock cooler or other?
    Is system stable at stock settings, Prime95, IBT/LynX(what is max GFlops with 3072MB?)

  8. #28
    Join Date
    May 2011
    Location
    Over the Rainbow
    Posts
    66

    Default Re: I need help to overclock a intel Q9550 on EP45-UD3P mobo

    Quote Originally Posted by Chike View Post
    @hyperpower

    Would be better if you create a new thread.
    Please fill your forum sugnature with fiull system spec.
    Are you using stock cooler or other?
    Is system stable at stock settings, Prime95, IBT/LynX(what is max GFlops with 3072MB?)
    OK, I am gonna open a new thread for this, thanks!

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •