Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23

Thread: GA-EP45-UD3P + Q9550 + OCZ reaper 2x2 pc8500..




  1. #21
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-UD3P + Q9550 + OCZ reaper 2x2 pc8500..

    You just have to either set it high and boot up and see what the difference in between what you set in the BIOS VS what you get in windows with CPU-z >>>
    CPUID

    Or start low and keep adding small bumps until you get windows to load.

    Either way will work, I was just trying to let you know what you set in the BIOS will be less in windows at idle, and even less then that at load and CPU-z will show you the voltage at idle/load

    Maybe 1.23-1.32 Actual for 3.4, some will need less, some more so that is just a general range

  2. #22
    Join Date
    Dec 2008
    Posts
    19

    Default Re: GA-EP45-UD3P + Q9550 + OCZ reaper 2x2 pc8500..

    Thanks, i will give it a shot when i get home from work. Also, this would run my ram at 1066? its running at 800 right now.

  3. #23
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-UD3P + Q9550 + OCZ reaper 2x2 pc8500..

    you have to change your memory multiplier to get your ram to 1066

    400 FSB use 2.66D = 1066Mhz ram

    333 FSB use 3.20B = 1066Mhz ram

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •