Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: overclock reverts to defaults on boot




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: overclock reverts to defaults on boot

    Great to hear you are up and running smoothly!!

    Do feel free to post back if you want more help or run into more issues

  2. #12
    Join Date
    Dec 2008
    Posts
    60

    Default Re: overclock reverts to defaults on boot

    Ok to revive an old thread haha I still have this rig and have OC to 3.2Ghz 401x8

    I am yet again getting the same problem with the overclock reverting back to defaults


    obust Graphics Booster___________ [Auto ]
    CPU Clock Ratio ____________ 8
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ 401
    PCI Express Frequency (Mhz)_______ 100
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ 2.00
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 4
    Dram RAS# to CAS# Delay_________ 4
    Dram RAS# Precharge Delay_______ 4
    Precharge Delay (tRAS)__________ 12/15

    ACT to ACT Delay (tRRD)_________ 3-4
    Rank Write to READ Delay________ 3-6
    Write to Precharge Delay_________ 4-6
    Refresh to ACT Delay______________ 52-62
    Read to Precharge Delay__________ 3-5
    Static tRead Value_______________ 6/7-10
    Static tRead Phase Adjust________ [Auto]

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] =2.1V (2.0-2.1)
    PCI-E OverVoltage Control_ normal
    FSB OverVoltage Control___ normal << +0.150
    (G)MCH OverVoltage Control normal << +0.175 ( was originally told 0.2 - 0.3 but the system wont boot at 0.2 so i didn't go any higher )
    CPU Voltage Control_______ normal 1.30 manually

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •