Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: EP45-UD3P & Q9500 & 8gig Crucial Ballistix




  1. #11

    Default Re: EP45-UD3P & Q9500 & 8gig Crucial Ballistix

    there is beta one ... F7a .. it is in the sticky bios

  2. #12

    Default Re: EP45-UD3P & Q9500 & 8gig Crucial Ballistix

    i think i figure it out ... i might have hit a FSB hole .... because now i lower to 350 then everything is stable and pass 2 hours prime blend so far... will posta result soon and hope you can help tweak it better...

    ** question ....
    would this be good to use ...

    Extreme Memory Profile (X.M.P.).....: auto
    (G)MCH Frequency Latch...............: 400
    System Memory Multiplier ..............: auto
    Memory Frequency (Mhz) ..............: 1080

    i see there is this option ... is this good ??? i figure this actually 2.4B .. of 333 trap...
    this would be same latency as 900 if i can get the 8 Static tRead Value
    what do you think which better.

    btw. can my ram go 1200 + .... i can try 400 trap with 2.6 = 1170 ... with this what my ram setting would be ?? and is this good also ?

    i know it is alot of question ... but i'm just curious ... hehehehehe

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P & Q9500 & 8gig Crucial Ballistix

    Quote Originally Posted by godto View Post
    ** question ....
    would this be good to use ...

    Extreme Memory Profile (X.M.P.).....: auto
    (G)MCH Frequency Latch...............: 400
    System Memory Multiplier ..............: auto
    Memory Frequency (Mhz) ..............: 1080

    i see there is this option ... is this good ??? i figure this actually 2.4B .. of 333 trap...
    this would be same latency as 900 if i can get the 8 Static tRead Value
    what do you think which better.
    Not sure, I would need to see your FSB in the above question to know if it was ok or not. But likely it is

    Quote Originally Posted by godto View Post
    btw. can my ram go 1200 + .... i can try 400 trap with 2.6 = 1170 ... with this what my ram setting would be ?? and is this good also ?

    i know it is alot of question ... but i'm just curious ... hehehehehe
    You would use 555-18 and likely a bit higher advanced timings is all, maybe more Voltage?

  4. #14

    Default Re: EP45-UD3P & Q9500 & 8gig Crucial Ballistix

    can you give me a sample of your 1200 ??? so i can have a guide line to aproximate by ... because higher i have no idea how high is high ... will test it slowly and when i got something stable then you can help me tweak it ... don't want to take too much of your time ... beside it's fun to tinker around. hehehehehe

  5. #15
    Join Date
    Nov 2008
    Location
    Florida, USA
    Posts
    90

    Default Re: EP45-UD3P & Q9500 & 8gig Crucial Ballistix

    Thanks Godto.
    Paul

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P & Q9500 & 8gig Crucial Ballistix

    I will load up a 1200 Profile and take some images for you tomorrow. But you dont need it, just set things high timing wise and you will be fine. You can only slow things down with higher timings, it wont hurt your ram or anything

  7. #17
    2therock's Avatar
    2therock is offline Member
    Join Date
    Mar 2008
    Location
    N. GA US
    Posts
    262

    Default Re: EP45-UD3P & Q9500 & 8gig Crucial Ballistix

    Can I get a description of what the bios versions do from F5 to F7a? I cannot seem to find any details on the make ups of any BIOS is or does.
    Gigabyte GA-Z77X-UD5H WB Motherboard
    Intel Ivy Bridge i7 3770K clocked @ 4.5GHz
    16GB Kingston Hyper-X Genesis 2133 RAM
    Water cooling by XSPC RASA RS240 Kit
    Sapphire HD 6850 1GB DDR5 GPU
    1TB - RAID1 setup with Western Digital 6GB/Sec Drives
    Corsair HX750W Professional PSU
    Windows 7 Professional (x64) Build 7601

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P & Q9500 & 8gig Crucial Ballistix

    Only info I could find for you >>>

    F7a info: successfully Flash ... currently nothing negative found...
    INFO: OC Quad test 450x8x2 .40B and 500x8x2 .00b ... OK

    F5 + F5b info: successfully Flash ...

    F5a seems the 2 .40B divider also not to work properly
    Here you will find "Some" Tests with most Beta's info posted, in German >>>
    JZ Board

    Which specific one would you like more info on?

    If you have a working BIOS with a good overclock there is no need to update at all

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •