Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: OC Help E7300 & GIGABYTE GA-EP45-UD3P & mushkin XP 996619 2x2GB




  1. #11
    Join Date
    Dec 2008
    Posts
    9

    Default Re: OC Help E7300 & GIGABYTE GA-EP45-UD3P & mushkin XP 996619 2x2GB

    I have a quesion about prime95, orthos versus linpack(intel burn test)
    I can no longer pass prime95 or orthos with any OC but I can run 20rds of linpack and it has no errors. Linpack is pushing temps on both cores to 65C while prime95 and orthos never get higher than 49C. My question is, is this OC stable if I can run 3dmark06, vantage, and linpack with no issues but always fail blend in prime95 and orthos? I am running vista64.

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OC Help E7300 & GIGABYTE GA-EP45-UD3P & mushkin XP 996619 2x2GB

    How does 10 passes of Memtest86+ do? And how about 1 hour or two of test # 5 and Test # 7 in Memtest86+?

  3. #13
    Join Date
    Dec 2008
    Posts
    9

    Default Re: OC Help E7300 & GIGABYTE GA-EP45-UD3P & mushkin XP 996619 2x2GB

    Its ok now, I found out that either my screensaver or the vista sidebar was causing the issue and now I can pass everything fine. Memtest is the 1st thing I run and the last thing I run so yes its A-ok now. Thanks for all the help so far. I think a I am going to take a break from OCing for a while so I can get on with the killing.

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OC Help E7300 & GIGABYTE GA-EP45-UD3P & mushkin XP 996619 2x2GB

    Nice to see you found your issue

    Good luck with your killing, I hope that is game related!

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •