Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: EP43-DS3L BIos Settings HELP




  1. #1
    Join Date
    Dec 2008
    Posts
    67

    Default EP43-DS3L BIos Settings HELP

    Can anyone help me with some grreat bios settings for my system THanks so much I'm new to this

    Intel e5200
    EP43-DS3L F8 bios
    2gb(2X1gb sticks) ddr2 pc2-5300 (333mhz)
    OCZrpr11501g
    585 watt psu
    Zalman 9500a cooling fan
    palit 9600gt 1gb sonic video card
    80gb and 250Gb IDE wd hard drives

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  3. #3
    Join Date
    Dec 2008
    Posts
    67

    Default Re: EP43-DS3L BIos Settings HELP

    I'm sorry I am unable to do it. I hope this helps (from cpuID) sorry. 2048MBYTES ddr2 dual symmetric(2x1gb)
    DRAM FREQ:460.1 mhz
    fsb dram 1:2
    5-5-5-18 / command rate 2T
    THANKS SO MUCH

  4. #4
    Join Date
    Dec 2008
    Posts
    67

    Default Re: EP43-DS3L BIos Settings HELP

    Oh and also I would like it to run around 3.0-3.3ghz

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP43-DS3L BIos Settings HELP

    Please post me a image then from CPU-z SPD Tab, or tell me the model # off the ram sticker

    Here is some starters until you give me that image from CPU-z

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 12
    Fine CPU Clock Ratio.....................:.5
    CPU Frequency ...........................: 3.00
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 240Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< stock
    PCI Express Clock Drive.................: <<< stock
    CPU Clock Skew (ps)....................: <<< 0
    MCH Clock Skew (ps)...................: <<< 0
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.66C
    Memory Frequency (Mhz) ..............: 638Mhz
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................4/5
    tRCD .........................................4/5
    tRP'...........................................4/5
    tRAS..........................................12/15
    
    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-5
    tWR............................................4-6
    tRFC...........................................35-42
    tRTP...........................................2-5
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................800
    
    Channel A
    Static tRead Value.........................:5-9
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:5-9
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: All up to your chip, stock may work but dont use AUTO as it will be too much. Set high so you know you can boot, then lower later.  Maybe 1.30-1.42 actual shown in CPU-z, what you set in the BIOS will be less in windows
    
    CPU Termination…..... 1.200V*.......: <<< 1.2-1.4
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << Auto
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.55-1.6
    ICH Core…………...……1.100V............: <<< 1.1x-1.2
    
    DRAM
    DRAM Voltage ……....1.800V............: 2.0
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  6. #6
    Join Date
    Dec 2008
    Posts
    67

    Default Re: EP43-DS3L BIos Settings HELP

    yes I will post those images as soon as a figure out how. And thanks to all for the help

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP43-DS3L BIos Settings HELP

    Just use print screen button, then open Paint and choose "Edit, then Paste" and save as JPG or PNG and upload to tinypic.com (or any photo host) then put the Direct URL into image tags as shown here >>>

    [img]Direct URL of Image goes Here[/img]

    Example
    [img]www.YourimageURL.Com[/img]

  8. #8
    Join Date
    Dec 2008
    Posts
    67

    Default Re: EP43-DS3L BIos Settings HELP





    HEre they are thank you a MILLION times. So far I am learning and you are very helpful. I used the settings that you have up there I hope this remains stable. I'm gonna run more test, so far this is holding up.

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP43-DS3L BIos Settings HELP

    WOW, I would ask that you please ask OCZ why your SPD contains 1142Mhz (571x2) EPP Profile! Do you see what I mean? Even 1066 sticks are not programmed like that

    Those sticks may have been programmed wrong!

    I would use 555-15 with 1.9V or so for now.

  10. #10
    Join Date
    Dec 2008
    Posts
    67

    Default Re: EP43-DS3L BIos Settings HELP

    thanks as usual, just contacted them,
    For now I just reset the bios to default. Anyways I'll see what OCZ's going to say. I really would like to run it at 3.2ghz without issues so if you have some bios settings to share ( I have the f8 bios by the way) that would be great(I'll use that 555-15 with 1.9 you suggested). Sorry I'm being a pain and I am so grateful to all.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •