Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Gigabyte Face Wizard




  1. #21
    Join Date
    Jan 2009
    Posts
    7

    Default Re: Gigabyte Face Wizard

    Hi All,

    I got almost similar problem with my GA MA790X-DS4, flashed the BIOS with no problem but the POST screen remain unchanged. Anybody know whats wrong? please help..

    Thanks
    R27

  2. #22
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte Face Wizard

    Do you have full screen logo enabled in the advanced page of the BIOS? I mean did you see a full image before?

  3. #23
    Join Date
    Jan 2009
    Posts
    7

    Default Re: Gigabyte Face Wizard

    Have checked, but could not find that option in the advance bios setting or anywhere else.
    Did it mean that it not supported by this board?
    Note: I have flashed the bios with most recent version (F6a) before run the facewizard

    Thanks
    R27

  4. #24
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte Face Wizard

    Well did you flash it again after you used the face wizard? I actually dont recommend using face wizard for the flash, I recommend to use the program to make the modded BIOS then save it and flash with Qflash.

    I think your board is supported otherwise the FaceWizard would have not let you add the image.

    Actually just looked at your Manual and it says 2x4Mbit BIOS and Face Wizard may only work for 2x8Mbit BIOS files, so you should have gotten a error when adding the image to the BIOS file. I am not sure though, as no mention of what boards it works with on the download page?

    You do have the latest Version correct? It is B8.0908.1 >>>
    GIGABYTE - Support&Download - Motherboard - Utility

    What exact steps did you do to make and then flash with the modded BIOS?

    They should be like this >>>
    1. Start Face Wizard
    2. Select BIOS (Either from Onboard or File)
    3. Load Modified Image
    4. Save BIOS file to Hard Drive using the SAVE Button
    5. Put modified BIOS file on USB Stick, Fat32 Partition, or Floppy
    6. Reboot and Enter Qflash
    7. Flash BIOS (W/ Keep DMI Data Disabled)
    8. Reboot BACK to the BIOS and Load Optimized Defaults and Set your Ram Voltage only
    9. Save/Apply/Reboot BACK to the BIOS
    10. Set all your BIOS options and settings over again, do not forget your SATA/Disk settings

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •