Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Help me!! OC E8600 with Ep45 Ud3p




  1. #1
    Join Date
    Dec 2008
    Posts
    21

    Default Help me!! OC E8600 with Ep45 Ud3p

    I try to manage my system oc around 4.5 with this board and then try to find the stable spot voltage but still got random error with ORTHOS blend but for around 4.26[533x8] my system is running fine. so this is the 4.46 [525x8.5] current setting but still got some error after 2-3 Hrs orthos blend pass......

    GIGABYTE GA-EP45-UD3P BIOS F3 E8600 GEIL 4GB 1066 525x8.5 Setting
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster .................: [Turbo]
    CPU Clock Ratio .........................: 8
    Fine CPU Clock Ratio.....................: [+0.5]
    CPU Frequency ...........................: 4462.7MHz
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] [Disabled]
    CPU Host Frequency (Mhz) ............: 525Mhz
    PCI Express Frequency (Mhz) .........: [102]
    C.I.A. 2.............................: [Disabled]
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mv
    PCI Express Clock Drive...................: 900mv
    CPU Clock Skew (ps).......................: 50ps
    MCH Clock Skew (ps).......................: 150ps
    DRAM Performance Control
    Performance Enhance....................: [Turbo]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: [Auto]
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ................: 1050Mhz
    DRAM Timing Selectable ................: [Manual]
    Standard Timing Control
    CAS Latency Time...............................: [5]
    tRCD ..........................................: [5]
    tRP'...........................................: [5]
    tRAS...........................................: [15]
    Advanced Timing Control [Press Enter]
    tRRD...........................................: [Auto]
    tWTR...........................................: [Auto]
    tWR............................................: [Auto]
    tRFC...........................................: [Auto]
    tRTP...........................................: [Auto]
    Command Rate (CMD) ............................: [Auto]
    Channel A
    Channel A Timings Settings [Press Enter]
    Static tRead Value......................: [9]
    tRD Phase0 Adjustmen...................: [Auto]
    tRD Phase1 Adjustment...................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]
    Trd2rd(Different Rank)..................: [Auto]
    Twr2wr(Different Rank)..................: [Auto]
    Twr2rd(Different Rank)..................: [Auto]
    Trd2wr(Same/Diff Rank)..................: [Auto]
    Dimm1 Clock Skew Control................: [Auto] ps
    Dimm2 Clock Skew Control................: [Auto] ps
    DDR Write Training......................: [Auto]
    Channel A Driving Settings [Press Enter]
    Driving Strength Profile:..............: [Auto] / OC-1200 / OC-1333
    Data Driving Pull-Up Level.............: [Auto]
    Cmd Driving Pull-Up Level..............: [Auto]
    Ctrl Driving Pull-Up Level.............: [Auto]
    Clk Driving Pull-Up Level..............: [Auto]
    Data Driving Pull-Down Level...........: [Auto]
    Cmd Driving Pull-Down Level............: [Auto]
    Ctrl Driving Pull-Down Level...........: [Auto]
    Clk Driving Pull-Down Level............: [Auto]
    Channel B
    Channel B Timings Settings [Press Enter]
    Static tRead Value......................: [9]
    tRD Phase0 Adjustmen...................: [Auto]
    tRD Phase1 Adjustment...................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]
    Trd2rd(Different Rank)..................: [Auto]
    Twr2wr(Different Rank)..................: [Auto]
    Twr2rd(Different Rank)..................: [Auto]
    Trd2wr(Same/Diff Rank)..................: [Auto]
    Dimm1 Clock Skew Control................: [Auto] ps
    Dimm2 Clock Skew Control................: [Auto] ps
    DDR Write Training......................: [Auto]
    Channel B Driving Settings [Press Enter]
    Driving Strength Profile:..............: [Auto] / OC-1200 / OC-1333
    Data Driving Pull-Up Level.............: [Auto]
    Cmd Driving Pull-Up Level..............: [Auto]
    Ctrl Driving Pull-Up Level.............: [Auto]
    Clk Driving Pull-Up Level..............: [Auto]
    Data Driving Pull-Down Level...........: [Auto]
    Cmd Driving Pull-Down Level............: [Auto]
    Ctrl Driving Pull-Down Level...........: [Auto]
    Clk Driving Pull-Down Level............: [Auto]
    Motherboard Voltage Control
    Voltage Type.…...……... Normal
    CPU
    Load-Line Calibration....................: [Enabled]
    CPU Vcore….……….........1.22500V*.........: 1.40625
    CPU Termination…...... 1.200V*...........: 1.24
    CPU PLL………………….........1.500V*...........: 1.50
    CPU Reference..........0.760V............: [Make Value increse a little bit to 0.7850 in ET6]
    MCH/ICH
    MCH Core……………..........1.100V............: 1.40
    MCH Reference..…...….….0.760V............: [Make Value around 0.70 in ET6]<--My E8600 can't set this to [Auto] to boot up
    MCH/DRAM Reference.....0.900V............: [Normal]
    ICH I/O…………....……......1.50V............: [Auto]
    ICH Core...............1.100V............: [Auto]
    DRAM
    DRAM Voltage ……........1.800V............: 1.80
    DRAM Termination ...…..0.900V............: [Normal]
    Channel A Address Vref 0.900V............: [Normal]
    Channel B Address Vref 0.900V............: [Normal]
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect.................: [Disabled]
    CPU Enhanced Halt (C1E)...................: [Disabled]
    C2/C2E State Support......................: [Disabled]
    x C4/C4E State Support....................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...............: [Enable]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology.................: [Disabled]
    **with this setting I can pass Othos blend around 2-3 hrs and then got error**

    Thanks for all help
    ____________________________
    System-1
    Q9550 @ 4.0 with Ultra 120 Extreme l EP45-UD3R l Crucial Ballistix 4GB 2x2GB l Gigabyte GTX 460 1GB
    LIANLI PC 8NWB l ENERMAX 460 WATT
    System-2
    I5-2500K with Tuniq 120 Extreme l
    P67A UD3P l Gskill 4GB Ripjaw 1600 CL9
    EVGA GT 420 l LIANLI PC P7FNWB l
    Thermaltake 600 WATT
    ____________________________

  2. #2
    Join Date
    Dec 2008
    Posts
    21

    Default Re: Help me!! OC E8600 with Ep45 Ud3p

    anyone
    ____________________________
    System-1
    Q9550 @ 4.0 with Ultra 120 Extreme l EP45-UD3R l Crucial Ballistix 4GB 2x2GB l Gigabyte GTX 460 1GB
    LIANLI PC 8NWB l ENERMAX 460 WATT
    System-2
    I5-2500K with Tuniq 120 Extreme l
    P67A UD3P l Gskill 4GB Ripjaw 1600 CL9
    EVGA GT 420 l LIANLI PC P7FNWB l
    Thermaltake 600 WATT
    ____________________________

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help me!! OC E8600 with Ep45 Ud3p

    Using performance enhance Turbo, and all those Auto's for your ram is likely part of the problem. You should try to get stable with all manual settings

    And you likely need more ram voltage for 1000+ maybe 1.9-2.0.

    I can give you my suggestions but they would have all manual settings

  4. #4

    Default Re: Help me!! OC E8600 with Ep45 Ud3p

    Quote Originally Posted by BuGjAE View Post
    MCH Reference..…...….….0.760V............: [Make Value around 0.70 in ET6]<--My E8600 can't set this to [Auto] to boot up
    Hey maybe thats my issue? I have to check

    Edit got it priming at 444x9 for now with .68 MCH reff thanks!!
    Last edited by SpeedEuphoria; 12-11-2008 at 10:05 PM.

  5. #5
    Join Date
    Dec 2008
    Posts
    21

    Default Re: Help me!! OC E8600 with Ep45 Ud3p

    .68 MCH Ref seem get more stable to me in sometime but I still got unstable with other voltage setting so, Now I still have no luck for rock solid stable....

    I see E8400, E8500 can go stable with 0.70 MCH ref in ET6 but for E8600 may not
    Last edited by BuGjAE; 12-12-2008 at 11:47 PM.
    ____________________________
    System-1
    Q9550 @ 4.0 with Ultra 120 Extreme l EP45-UD3R l Crucial Ballistix 4GB 2x2GB l Gigabyte GTX 460 1GB
    LIANLI PC 8NWB l ENERMAX 460 WATT
    System-2
    I5-2500K with Tuniq 120 Extreme l
    P67A UD3P l Gskill 4GB Ripjaw 1600 CL9
    EVGA GT 420 l LIANLI PC P7FNWB l
    Thermaltake 600 WATT
    ____________________________

  6. #6

    Default Re: Help me!! OC E8600 with Ep45 Ud3p

    Yeah i reread that thread at xtremesystems and found that you are correct and MCH reff is very important, I can only boot with .70v(in ET6, depends on Cpu termination) or real close.

    I am not pushin too much so far. Most was 464x9 2hrs prime blend.

    It seems that at this point for me, that as long as MCH reff is .70 in ET6, which is .74-5 when cpu termination is 1.2v, then the other voltages dont matter for me. Well prob until I get to 500FSB.

    I have tried higher and lower(one at a time), MCH core/MCH reff/Cpu Term/PLL/Clock drive/skew and nothing made a difference, only more Vcore made a difference. I can run with 1.35 PLL, 1.2 Vtt, 1.28 MCH, 1.35 ICH, as long as I have that .70v for MCH reff


    Maybe try a different BIOS

  7. #7
    Join Date
    Dec 2008
    Posts
    21

    Default Re: Help me!! OC E8600 with Ep45 Ud3p

    Ok I up Cpu Vtt to 1.34 see how far it can go.... but thanks for 0.68 MCH ref It's help me a lot
    Attached Images Attached Images Help me!! OC E8600 with Ep45 Ud3p-ep45ud3p-orthosblend4462-52-jpg 
    ____________________________
    System-1
    Q9550 @ 4.0 with Ultra 120 Extreme l EP45-UD3R l Crucial Ballistix 4GB 2x2GB l Gigabyte GTX 460 1GB
    LIANLI PC 8NWB l ENERMAX 460 WATT
    System-2
    I5-2500K with Tuniq 120 Extreme l
    P67A UD3P l Gskill 4GB Ripjaw 1600 CL9
    EVGA GT 420 l LIANLI PC P7FNWB l
    Thermaltake 600 WATT
    ____________________________

  8. #8
    Join Date
    Dec 2008
    Posts
    21

    Default Re: Help me!! OC E8600 with Ep45 Ud3p

    ,SpeedEuphoria
    Do you gonna go higher?? but I see many post FSB around below 500 is fine for 1.20 Vtt. I got my RAM 1066 Bus and I plan to manage to 533x8.5 1:1 soon if possible in this board.
    ____________________________
    System-1
    Q9550 @ 4.0 with Ultra 120 Extreme l EP45-UD3R l Crucial Ballistix 4GB 2x2GB l Gigabyte GTX 460 1GB
    LIANLI PC 8NWB l ENERMAX 460 WATT
    System-2
    I5-2500K with Tuniq 120 Extreme l
    P67A UD3P l Gskill 4GB Ripjaw 1600 CL9
    EVGA GT 420 l LIANLI PC P7FNWB l
    Thermaltake 600 WATT
    ____________________________

  9. #9

    Default Re: Help me!! OC E8600 with Ep45 Ud3p

    Quote Originally Posted by BuGjAE View Post
    ,SpeedEuphoria
    Do you gonna go higher?? but I see many post FSB around below 500 is fine for 1.20 Vtt. I got my RAM 1066 Bus and I plan to manage to 533x8.5 1:1 soon if possible in this board.
    Yes I plan to go higher. I found that .68-70 MCH ref, and tried higher clocks. Then I went back to trying to get the most on 1.25v. I have tried most everything at this level and only seem to do 420-422x9 on 1.25 w/ LLC enabled.

    So now I'm going to try higher with 1.37 Vcore and see.


    Have you tried any other BIOS's yet?

    I'm using F7a now and started w/ F5 when I didnt know about this MCH ref thing.

    Also I see another guy that run .65 MCH ref and works good(.65 in ET6)
    Last edited by SpeedEuphoria; 12-13-2008 at 01:47 AM.

  10. #10
    Join Date
    Dec 2008
    Posts
    21

    Default Re: Help me!! OC E8600 with Ep45 Ud3p

    Yes, I tried every bios that release and I feel most likely the same. F7A should be fine for my current clock... some time I feel this board may not go very high clock since I never see some one pose This board can do stablility @ 5.00 GHZ but hope fully the soon release bios may have something amazing!!!!


    And also thanks Lsdmeasap for recommend Dram Volt to 2.00 It's help me a lot
    Last edited by BuGjAE; 12-13-2008 at 02:03 AM.
    ____________________________
    System-1
    Q9550 @ 4.0 with Ultra 120 Extreme l EP45-UD3R l Crucial Ballistix 4GB 2x2GB l Gigabyte GTX 460 1GB
    LIANLI PC 8NWB l ENERMAX 460 WATT
    System-2
    I5-2500K with Tuniq 120 Extreme l
    P67A UD3P l Gskill 4GB Ripjaw 1600 CL9
    EVGA GT 420 l LIANLI PC P7FNWB l
    Thermaltake 600 WATT
    ____________________________

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •