Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 10 of 10

Thread: Hi everyone My first post so please be gentle!




  1. #1
    Join Date
    Dec 2008
    Location
    West yorkshire, England
    Posts
    16

    Angry Hi everyone My first post so please be gentle!

    I have just bought a GA EP45 GQ6 motherboard and am experiancing some really ,really big problems with it.!.Let me start by saying I`m not an expert by any standards but have a little knowledge of componants...

    I have a :-
    Tagan 1100 watt power supply.
    Q6600 go stepper @2.4 ghz..
    8 gigabytes of DDR2 XMS2-8500C5D DOMINATOR @1066..@4 X 2 GIG Sticks
    2 X 500 GIG HDD SAMSUNGS..
    3 X 8800GTX`S only one in this board now..
    2 X Super writemaster CDDVDROM drives.
    soprano thermaltake case, no aftermarket coolers as I don`t overclock.


    I fitted this great board yesterday and have had nothing but BSODS and Black screens ever since!
    I have only used 1x2GIG ram stick cos I thought I might have to set the ram timings manually 5-5-5-15.ect..ect..tried that failed miserably..lol

    I did a fresh install of vista 64 ultimate and tried again...after literally 15 attempts it let me install the OS without Blue screening on me..
    Everytime windoze updates download the relevant updates for the OS the system restarts and just goes in to the following cycle....

    Black screen...Boot failiure..(no sh*t sherlock..)..boot time scan..I assume by this it means a check disk or something OS wise!.please insert your windoze disc and restart your computer when required click next and click repair..so on..so on. follow instructions to the letter...CDDVD rom drive spins up 5 mins later decides to blues screen again....restarts itself..back to the Boot failiure screen Please insert....ect.ect..I`m at my wits end with it now and I really don`t know what to do or where to turn ..I`m hoping that someone here has the answers cos Its costing me a bloody fortune keep buying new parts..!
    PLEASE HELP..!
    Last edited by Knightron; 12-14-2008 at 04:00 AM.

  2. #2

    Default Re: Hi everyone My first post so please be gentle!

    OK, first thing is getting things going with 1 stick only. Probably only 1 video cards as well. Once things are stable then you can add the rest.

    Memory though will be a problem as there are two sets. Memory are rated in pairs and with a second pair added you will lose speed and timings and you'll have to modify the motherboards volts for the north bridge and vtt (fsb volts)

    once you get stable, you can worry about the other options later. Just try to work on 1 thing at a time to help keep track on what's happening. If you start changing too many things at once then it's harder to tell where the problem is.

    Good luck
    -=Mark=-

  3. #3
    Join Date
    Dec 2008
    Location
    West yorkshire, England
    Posts
    16

    Smile Re: Hi everyone My first post so please be gentle!

    Quote Originally Posted by MarkJohnson View Post
    OK, first thing is getting things going with 1 stick only. Probably only 1 video cards as well. Once things are stable then you can add the rest.

    Memory though will be a problem as there are two sets. Memory are rated in pairs and with a second pair added you will lose speed and timings and you'll have to modify the motherboards volts for the north bridge and vtt (fsb volts)

    once you get stable, you can worry about the other options later. Just try to work on 1 thing at a time to help keep track on what's happening. If you start changing too many things at once then it's harder to tell where the problem is.

    Good luck
    -=Mark=-
    Hi Mark Thanks for your time replying mate much apreaciated mate..
    I have hi-lighted the parts of your post that I have already taken into consideration and given my self headaches thinking about over the last couple of days..lol

    Graphics cards..
    I was told that these boards don`t support SLI..because of the intel chipset..is that not the case..? I know you can use ATI cards on SLI mother boards but not the other way round!...95 for the Nvidia chipset apparently!..lol..2 X 4870`s will do..lol
    Memory...
    This has wound me up the most..When you go and pay 200 for a mother board you expect it to do the things it says it will in the board spec yeah?..Its telling me here that this board will support 16 Gigabytes of DDR2 ram up to 1200....If thats the case why is it going to slow my system down?....I`m a bit of a novice builder, done a couple of low-end systems with my mate but this one and the one This build is replacing have been reasonably high end..The dominator Ram is supposed to be the best and most adaptable to more modern motherboards..Thats why I bought it!...I never had a single glitch with the last build..With the P5N32-E SLI PLUS board..That was TRI- SLI 3 X 8800GTX`s..lol great for gaming but the electric bill was astronomical!....

    Getting stable...
    Well as stated above most of the componants in this build are reasonably high end,so All i`m worried about is blowing them up ,frying them or rendering them useless by pratting about with em! If I can make this build half as good as the last one I will be a happy man....I just need help to get this motherboard doing as it is told to do.. or its going to get some P4 up its channels.....

    As I say mate thanks for taking the time to reply its much apreaciated..Regards .. Dave...

  4. #4

    Default Re: Hi everyone My first post so please be gentle!

    Quote Originally Posted by Knightron View Post
    Hi Mark Thanks for your time replying mate much apreaciated mate..
    I have hi-lighted the parts of your post that I have already taken into consideration and given my self headaches thinking about over the last couple of days..lol

    Graphics cards..
    I was told that these boards don`t support SLI..because of the intel chipset..is that not the case..? I know you can use ATI cards on SLI mother boards but not the other way round!...95 for the Nvidia chipset apparently!..lol..2 X 4870`s will do..lol
    Only the X58 chipsets support SLI modes as nvidia has refused Intel rights to use it in the past. They finally just gave them permission earlier this year.

    But, you can use 3 nvidia cards in your susyem if you chose to do so in non-sli mode. A lot of folding teams do this as nvidia cards get higher fold rates than ATI card.

    Memory...
    This has wound me up the most..When you go and pay 200 for a mother board you expect it to do the things it says it will in the board spec yeah?..Its telling me here that this board will support 16 Gigabytes of DDR2 ram up to 1200....If thats the case why is it going to slow my system down?....I`m a bit of a novice builder, done a couple of low-end systems with my mate but this one and the one This build is replacing have been reasonably high end..The dominator Ram is supposed to be the best and most adaptable to more modern motherboards..Thats why I bought it!...I never had a single glitch with the last build..With the P5N32-E SLI PLUS board..That was TRI- SLI 3 X 8800GTX`s..lol great for gaming but the electric bill was astronomical!....
    First, the wounding is coming from the memory company. They rate their sticks in pairs. A set of two sticks will run faster than an identical set with 4 sticks. If you look, some companies are now selling in sets of 4 now to help end the confusion. There is still the possiblity to run your memory at their rated speed and timings but you'll most likely need to increase the memory voltage and fiddle with the memory timings on the motherboard. It won't just plug and play as the plug and play feature of the memory is for only two sets of sticks. They haven't set a plug and play standard for 4 stick kits yet.

    Getting stable...
    Well as stated above most of the componants in this build are reasonably high end,so All i`m worried about is blowing them up ,frying them or rendering them useless by pratting about with em! If I can make this build half as good as the last one I will be a happy man....I just need help to get this motherboard doing as it is told to do.. or its going to get some P4 up its channels.....

    As I say mate thanks for taking the time to reply its much apreaciated..Regards .. Dave...
    There a reason they call these new technologies, "Bleeding edge" for a reason. - lol They are new and untested and usually take a few months to fine tune. Unless you're a guru you may want to stick to tried and true components that are sure to work. Usually all the motherboard site will have a memory compatibility list you can look at before buying their boards.

    Keep us updated on your progress.

    some suggestions to get you started would be to go to the BIOS and load optimized defaults. I usually reboot here and then go back into the bios.

    Then set your ram volts to manufacturer volts.

    Set cpu volts (vcore) to 1.225v. This is very important as most of the time this auto settings causes a lot of problems as it seems to adjust things too high/low or out of sync. so manually setting it to 1.225v will be great for at least 400FSB.

    set your CPU FSB to 400.

    Set your ram to 1:1 speed which should read your ram 800MHz.

    leave all other settings on auto/default for the time being and test for stability.

    First get CPU-z to provide info on your overclock.
    CPUID

    Real temp to monitor your CPU temperature.
    Real Temp - CPU temperature monitoring

    OCCT to stress your CPU. watch the heat when this runs!
    Download - OCCT Website english

    Mem Test to test your memory. Run this after/before OCCT. Do not run both at same time.
    MemTest for Windows Download Page

    do not try going past 400 without an aftermarket heatsink for your CPU. The stock one doesn't cool very well.

    Let us know your results and any errors. please be descriptive as possible.

    Good luck
    -=Mark=-

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Hi everyone My first post so please be gentle!

    Please link to your ram, and fill this out with what you are using now.. And would like to run and I will advise >>>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: 
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 
    PCI Express Clock Drive.................: <<< 
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  6. #6
    Join Date
    Dec 2008
    Location
    West yorkshire, England
    Posts
    16

    Default Re: Hi everyone My first post so please be gentle!

    Quote Originally Posted by Lsdmeasap View Post
    Please link to your ram, and fill this out with what you are using now.. And would like to run and I will advise >>>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: auto
    CPU Clock Ratio ..........................: 9x266
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 2.4GHZ(266X9)
     
     
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [disabled]
    CPU Host Frequency (Mhz) ............: 266Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
     
    C.I.A.2 .................................:[Disabled]
     
     
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800NV<<< 
    PCI Express Clock Drive.................: 900NV<<< 
    CPU Clock Skew (ps)....................: 0 ps
    MCH Clock Skew (ps)...................: 0 ps 
     
     
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00a
    Memory Frequency (Mhz) .1066.............:533 
    DRAM Timing Selectable ................: [Manual]
     
    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12
     
    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................4
    tWR............................................8
    tRFC...........................................68
    tRTP...........................................4
    Command Rate (CMD) ....................:0
     
    Driving Strength Profiles
    Driving Strength ............................could not find this in my bios..!
     
    Channel A
    Static tRead Value........set to 10...:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Channel B
    Static tRead Value.......set to 10...:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.28750 v auto
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much
     
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
     
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
     
    MCH/ICH
    MCH Core…………….....1.100V...........: << auto
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
     
    DRAM
    DRAM Voltage ……....1.800V............: auto
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
     
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
     
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

    Thanks mate hope you can help with this...

    Here is a link code to a screen shot of cpuid and memset I got earlier....
    http://i276.photobucket.com/albums/k...screenshot.jpg
    And here is a link to my ram I have 2 matched sets of this =8 gigabytes..
    Linky..clicky

    Thanks again for your time mate very much needed and apreaciated..
    Last edited by Knightron; 12-15-2008 at 07:00 AM.

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Hi everyone My first post so please be gentle!

    Sounds first like you need to update your BIOS or Load optimized defaults if you have not already since your last flash if you updated, or if you have never loaded it. You will need to load optimized and set your ram voltage ONLY and save/apply/reboot BACK to the BIOS. You MUST reboot back to the BIOS to set your SATA/Disk settings again if you forget and have RAID your array will be corrupted. And of course then you can set all your other settings again as well.

    I say all that because you say no "Driving Strength Profiles in your BIOS" and it is there as you can see here (F12 BIOS, Likely F11 as well, but I did not check. I can if you like) >>>



    Your BIOS download page is here >>>
    GIGABYTE - Support&Download - Motherboard - BIOS - GA-EP45-DQ6 (rev. 1.0)

    And PLEASE Do read this fully before you flash or if you have already read anyway for next time and for relevant Load Optimized information >>>
    http://forums.tweaktown.com/f69/bios...h-guide-27576/

    You never said what speed you want to run, so I will go with what you posted above and just add in optimal ranges and fix your ram speed for you

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: auto or Fast
    CPU Clock Ratio ..........................: 9x266
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 2.4GHZ(266X9)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 266Mhz
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800NV<<<
    PCI Express Clock Drive.................: 900NV<<<
    CPU Clock Skew (ps)....................: 0 ps
    MCH Clock Skew (ps)...................: 150-250 ps


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 4.00A
    Memory Frequency (Mhz) .1066.............:1066
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15/18

    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................4-6
    tWR............................................6-10
    tRFC...........................................58-75
    tRTP...........................................4-7
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................could not find this in my bios..! See above note, 800/1066/1200

    Channel A
    Static tRead Value........set to 10...:6/7-10 333/B MCH - 8/9-12 400/D MCH (You can use 7-9 for sure)

    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.......set to 10...:6/7-10 333/B MCH - 8/9-12 400/D MCH (You can use 7-9 for sure)

    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.28750 v auto
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much

    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.24-1.35 (1.26-1.34 likely good for 8GB)
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.55-1.6
    ICH Core…………...……1.100V............: <<< 1.1x-1.2

    DRAM
    DRAM Voltage ……....1.800V............: 2.0-2.1 (Set 2.1 first and then try lower later)
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  8. #8
    Join Date
    Dec 2008
    Location
    West yorkshire, England
    Posts
    16

    Default Re: Hi everyone My first post so please be gentle!

    Well chief it looks like you have solved a problem that on my own would have been insurmountable..Please accept my heart felt thanks and apreaciation for the clear and concise advice you have offered...Thank you very much for your help with this..you sir are an officer and a gentle man!

    All the best ... Regards,. Dave..aka... Knightron!

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Hi everyone My first post so please be gentle!

    So? All is working good for you now then? If so, great!

    Just kinda wondered as I am not sure if you was being funny/upset by that comment or if you really meant it and were all good.

    Just unsure since you did not say if you were up and running smoothly or not now

    Hey, you found driving strengths settings too right? Just wondered because if you did not I could tell you the hotkey you could try as well if you are still not seeing it

  10. #10
    Join Date
    Dec 2008
    Location
    West yorkshire, England
    Posts
    16

    Default Re: Hi everyone My first post so please be gentle!

    Quote Originally Posted by Lsdmeasap View Post
    So? All is working good for you now then? If so, great!

    Just kinda wondered as I am not sure if you was being funny/upset by that comment or if you really meant it and were all good.

    Just unsure since you did not say if you were up and running smoothly or not now

    Hey, you found driving strengths settings too right? Just wondered because if you did not I could tell you the hotkey you could try as well if you are still not seeing it
    No mate everthing is now hunky dory...Not being funny or upset mate I `m glad that your advice was put in that way I could not get it wrong..lol..


    I did have an issue with one of my 500 gig hard drives..then both of em went bye bye..so had to buy new master drive seagate barracuda...well it was as good an excuse as any..
    I`m sorry I have`nt posted since my last one it`s because I have had to reformat for the above reasons..great advice mate and thankyou all again for your time and effort it is very much apreaciated..

    Tweak town forums you rock!..


    ps have now got 8 gig of corsair dominator working @1066 mhz....I`m a very happy chappie...:P
    Last edited by Knightron; 12-18-2008 at 03:54 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •