Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 7 FirstFirst ... 4567 LastLast
Results 51 to 60 of 69

Thread: Gigabyte EP35-DS3 motherboard and Intel Q9550 help.




  1. #51
    Join Date
    Dec 2008
    Posts
    43

    Default Re: Gigabyte EP35-DS3 motherboard and Intel Q9550 help.

    Robust Graphics Booster___________ [ Fast]
    CPU Clock Ratio ____________ [8]
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [424]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.40 ]
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 18

    ACT to ACT Delay (tRRD)_________ 4
    Rank Write to READ Delay________ 6
    Write to Precharge Delay_________ 6
    Refresh to ACT Delay______________ 62
    Read to Precharge Delay__________ 5
    Static tRead Value_______________ 10
    Static tRead Phase Adjust________ [Auto] << Always Auto

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V]
    PCI-E OverVoltage Control_ [+0.1V]
    FSB OverVoltage Control___ [0,3]
    (G)MCH OverVoltage Control [0,3]
    CPU Voltage Control_______ [1,40625V]

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

    This is the settings I run at now...and prime ran in 5 hours and 24 min and then core 2 stopped with same error message as before.
    A small but still an improvement. ;)
    Yes I know I have to try my self...but I have been tying now since my first post and I'm getting mad soon cos it don't want to work stable at any settings! :P

  2. #52
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EP35-DS3 motherboard and Intel Q9550 help.

    TRY FSB only +0.1-.15 MCH +.25 and one more bump in vcore

  3. #53
    Join Date
    Dec 2008
    Posts
    43

    Default Re: Gigabyte EP35-DS3 motherboard and Intel Q9550 help.

    Quote Originally Posted by Lsdmeasap View Post
    TRY FSB only +0.1-.15 MCH +.25 and one more bump in vcore
    I can only set FSB and MCH this way... 0.1, 0.2 and max is 0.3 so there is not 0.15 or 0.25 sorry.

    And if I set the Vcore one more bump it shows me 1.37 something in Windows and that feels abit to high. :/

  4. #54
    Join Date
    Dec 2008
    Posts
    43

    Default Re: Gigabyte EP35-DS3 motherboard and Intel Q9550 help.

    I have decided to stay at 3.51Ghz and try to set my timings and memory to run at optimal speed etc.
    So what's your suggestion on lowest memory settings etc at 3.51Ghz?

    It's running now at...

    5-5-5-15, 3-4-6-52-5-7-auto

    DDR2 volt at 0.3V
    FSB volt at 0.1V
    MCH volt at 0.2V
    CPU volt at 1.40625V




    BTW is there any similar site/place like this? Where I can get help with an Asus P5Q Pro motherboard and Intel CPU E8500 and OCZ reaper 4GB (2x2GB) PC8500 memory overclocking. I have a friend that wants to OC his PC! :)
    Last edited by DevilsOwn; 01-09-2009 at 12:45 AM.

  5. #55
    Join Date
    Dec 2008
    Posts
    43

    Default Re: Gigabyte EP35-DS3 motherboard and Intel Q9550 help.

    Quote Originally Posted by DevilsOwn View Post
    I have decided to stay at 3.51Ghz and try to set my timings and memory to run at optimal speed etc.
    So what's your suggestion on lowest memory settings etc at 3.51Ghz?

    It's running now at...

    5-5-5-15, 3-4-6-52-5-7-auto

    DDR2 volt at 0.3V
    FSB volt at 0.1V
    MCH volt at 0.2V
    CPU volt at 1.40625V




    BTW is there any similar site/place like this? Where I can get help with an Asus P5Q Pro motherboard and Intel CPU E8500 and OCZ reaper 4GB (2x2GB) PC8500 memory overclocking. I have a friend that wants to OC his PC! :)
    So any luck?

    Yeah I have now run prime 12 hours and no errors!

    FSB at 414 @ 3.51ghz
    SPD at 2.50
    5
    5
    5
    15
    3
    3
    6
    52
    4
    7
    auto

    DDR2 voltage +0.300V
    PCI-e +0.1
    FSB volt 0.1
    MCH volt 0.2
    CPU volt 1.40000V

    Anything I have forgotten or need to change?

  6. #56
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EP35-DS3 motherboard and Intel Q9550 help.

    Tons of boards/forums for overclocking. None Specific to Asus that I know of though, but I dont own one so not sure. Have you googled Asus support forum?

    If you do want some overclocking forum links let me know and I can post some

    Those settings look very good! Only thing you may be able to lower is tRFC (52) and tRTP (4). Try 48 and 3 respectively

  7. #57
    Join Date
    Dec 2008
    Posts
    43

    Default Re: Gigabyte EP35-DS3 motherboard and Intel Q9550 help.

    OK mate...thank you for all help.

    I'll do a search for another forum for Asus boards...ty! ;)


    Thank you again for ALL the help you have given me!

  8. #58
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EP35-DS3 motherboard and Intel Q9550 help.

    Anytime man, like I said if you do need some links let me know

    Good luck!

  9. #59
    Join Date
    Dec 2008
    Posts
    43

    Default Re: Gigabyte EP35-DS3 motherboard and Intel Q9550 help.

    Hi LSD mate! Sorry to open this post again!
    But my old ram went bad and i got new ram now.
    It's not the same brand etc. These are Kingston Hyperx PC9200 CL5 2x1GB x2 so its 4GB memory.
    Here's a link so u can read about them.

    http://www.overclockers.co.uk/showpr...odid=MY-023-KS

    Can't get them to run stable yet. I'm now running them in 2.40, timings... 5-5-5-15 and rest in auto. And the rest settings are as the post ive done before...look up some posts. :)
    Would be nice if u can help me some. ;)

    Thanx in advance.
    Last edited by DevilsOwn; 01-29-2009 at 03:30 AM.

  10. #60
    Join Date
    Dec 2008
    Posts
    43

    Default Re: Gigabyte EP35-DS3 motherboard and Intel Q9550 help.

    Quote Originally Posted by DevilsOwn View Post
    Hi LSD mate! Sorry to open this post again!
    But my old ram went bad and i got new ram now.
    It's not the same brand etc. These are Kingston Hyperx PC9200 CL5 2x1GB x2 so its 4GB memory.
    Here's a link so u can read about them.

    http://www.overclockers.co.uk/showpr...odid=MY-023-KS

    Can't get them to run stable yet. I'm now running them in 2.40, timings... 5-5-5-15 and rest in auto. And the rest settings are as the post ive done before...look up some posts. :)
    Would be nice if u can help me some. ;)

    Thanx in advance.
    I'll bump this then! ;)

Page 6 of 7 FirstFirst ... 4567 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •