Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 4 FirstFirst ... 234
Results 31 to 32 of 32

Thread: Safe overclock Q6600 with EP45-UD3P




  1. #31
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Safe overclock Q6600 with EP45-UD3P

    Yes it looks it reverted to 266MHz FSB.
    It is alway a good idea to enter M.I.T after saving settings, you will get a warning message if settings failed boot.
    Take anything I post in very little reliability doe do high alcohohol levels in my blood If anything looks suspicious ask.
    Try th following settings:
    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 8x
    CPU Frequency ...........................: 3.4HGz (425x8)
     
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 425
    PCI Express Frequency (Mhz) .........: 100
     
    C.I.A.2 .................................:[Disabled]
     
     
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0
     
     
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [auto]
    System Memory Multiplier ..............: 2.40B 
    Memory Frequency (Mhz) ..............: 1020
    DRAM Timing Selectable ................: [Manual]
     
    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 15
     
    Advanced Timing Control
    tRRD........................................... [Auto]
    tWTR.......................................... [Auto]
    tWR............................................ [Auto]
    tRFC........................................... [Auto]
    tRTP........................................... [Auto]
    Command Rate (CMD) ....................: [Auto]
     
    Driving Strength Profiles
    Cannel A & B
    Driving Strength ............................ [1066] 
     
    Channel A
    Static tRead Value.........................: [9]
    tRD Phase0 Adjustment...................: [Auto]
    tRD Phase1 Adjustment...................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]
    Trd2rd(Different Rank)....................: [Auto]
    Twr2wr(Different Rank)...................: [Auto]
    Twr2rd(Different Rank)...................: [Auto]
    Trd2wr(Same/Diff Rank)..................: [Auto]
    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
     
    Channel B
    Static tRead Value.........................: [9]
    tRD Phase0 Adjustment...................: 0 [Auto]
    tRD Phase1 Adjustment...................: 0 [Auto]
    tRD Phase2 Adjustment .................: 0 [Auto]
    tRD Phase3 Adjustment..................: 0 [Auto]
    Trd2rd(Different Rank)....................: [Auto]
    Twr2wr(Different Rank)...................: [Auto]
    Twr2rd(Different Rank)...................: [Auto]
    Trd2wr(Same/Diff Rank)..................: [Auto]
    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
     
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: [1.4-1.49] << begin with 1.45 
    CPU Termination…..... 1.200V*.......: [1.24-1.32]
    CPU PLL…………………....1.500V*.......: [1.57-1.59]
    CPU Referen.…………....0.755V*.......: [Auto]
    CPU Reference2………,,0.800V*.......: Setting not present
     
    MCH/ICH
    MCH Core…………….....1.100V...........: [1.24.1.30]
    MCH Reference….…….0.800V...........: [Auto]
    MCH/DRAM Ref.…......0.900V...........: [Auto]
    ICH I/O……………….....1.550V............: auto
    ICH Core…………...……1.100V............: auto
     
    DRAM
    DRAM Voltage ……....1.800V............: 2.100
    DRAM Termination .…0.900V............: [Auto]
    Channel A Reference 0.900V............: [Auto]
    Channel B Reference 0.900V............: [Auto]
     
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [disable]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: Setting not present
    x C4/C4E State Support..................: Setting not present
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    BTW what stepping is the CPU?

  2. #32
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Safe overclock Q6600 with EP45-UD3P

    Quote Originally Posted by Chike View Post
    Take anything I post in very little reliability doe do high alcohohol levels in my blood If anything looks suspicious ask.
    Hehehe!

Page 4 of 4 FirstFirst ... 234

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •