Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 1 of 1

Thread: GA-EP45-UD3P, E8500 E0 and Corsair Dominator PC8500 OC




  1. #1
    Join Date
    Dec 2008
    Posts
    1

    Default GA-EP45-UD3P, E8500 E0 and Corsair Dominator PC8500 OC

    Hello everyone,

    I am currently busy with overclocking my system. But during all the testing and stuff I'm having random freezes during games and stuff,
    also prime95 i can't get stable enaugh (got 3h stable) after that crash -> reboot. I'm trying to run 4.4Ghz (518 x 8,5) and even better is 550x8!
    I'm thinking its crashing cause of the RAM subtimings which i do got on "auto" CPU small FTT is stable 8h+ at 4.4ghz but blend ain't. having 2x2GB Corsair dominators with the fan included. whole setup:

    GA-EP45-UD3P
    E8500 E0
    2x2GB Corsair dominators
    OCZ 600W GameXStream
    1TB Samsung Spinpoint
    HD4870 512MB + Acellero twin turbo
    TRUE 120 CPU cooler
    Creative Xtreme audio

    This are my current settings:

    *MB Intelligent Tweaker
    ->Robust Graphics Booster [Auto]
    CPU Clock Ration [8x]
    Fine CPU Clock Ratio [+0.5]
    CPU Frequency 4.40Ghz

    ***Clock Chip Control****
    CPU Host Frequency [518Mhz]
    PCI Express Frequency [100Mhz]
    C.I.A.2 [Disabled]
    *Advanced Clock Control
    CPU Clock Drive [800mV]
    PCI Express Clock Drive [900mV]
    CPU Clock Skew [0ps]
    MHC Clock Skew [0ps]

    ***DRAM Performance Control***
    Performance Enhance [Standard]
    Extreme Memory Profile [Auto]
    (G)MCH Frequency Latch [333MHz]
    System Memory Multiplier (SPD) [2.00B]
    Memory Frequency (Mhz) 1036 ( yeah it's underclocked.. :/ )
    DRAM Timing Selectable (SPD) [Manual]
    CAS Latency Time 5 [5]
    tRCD 5 [5]
    tRP 5 [5]
    tRAS 15 [15]
    **Advanced Timing Control**
    tRRD 4 [Auto]
    tWTR 4 [Auto]
    tWR 8 [Auto]
    tRFC 68 [Auto]
    tRTP 4 [Auto]
    Command Rate (CMD) 0 [2]
    *Channel A Timing Settings*
    Static tRead Value 9 [Auto]
    all under set to auto --> Channel B Timing Setting identical
    *Channel A Driving Settings [Auto]
    all under set to auto --> Channel B Driving Setting identical
    *Channel B Driving Settings [Auto]
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    Channel B
    Static tRead Value.........................: Auto
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps


    Load-Line Calibration [Enabled]
    CPU Vcore 1.25v [1.45v] (1.42 at load :-) prime95 Small FTT is stable at this vcore)
    CPU Termination 1.2v [1.28v]
    CPU PLL 1.5v [1.57v]
    CPU Reference 0.76v [Auto]
    MCH Core 1.1v [1.4v]
    MCH Reference 0.76v [0.77v] (.72 in ET6)
    MCH/DRAM Reference 0.9v [auto]
    ICH I/O 1.5v [auto]
    ICH Core 1.1v [auto]

    DRAM voltage 1.8v [2.12v] (2.108v at load :-)
    Dram Termination 0.9v [auto]
    Channel A reference 0.9v [auto]
    Channel B Reference 0.9v [auto]

    ****Advanced BIOS Setting****
    HDD S.M.A.R.T. Capability [Disabled]
    Limit CPUID Max. to 3 [Disabled]
    No-Execute Memory Protect [Enabled]
    CPU Enhanced Halt (C1E) [Disabled]
    C2/C2E State Support [Disabled]
    CPU Thermal Monitor 2(TM2) [Disabled]
    CPU EIST Function [Disabled]
    Virtualization Tech [Disabled]
    Last edited by msmeenge; 12-18-2008 at 10:02 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •