Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: New to overclocking (NEED HELP) EP45-UD3R




  1. #1
    Join Date
    Dec 2008
    Posts
    2

    Default New to overclocking (NEED HELP) EP45-UD3R

    Never overclocked anything before, first PC build. Got lost in the BIOS :) Need some help pls

    Was able to reach 3.6ghz through Easytune 400mhz x 9.0
    Didn't try for more after I was told I need to OC through BIOS to get the best performance.

    Stable prime95 for 9 hours.


    Systems Specs:

    Motherboard: Gigabyte EP45-UD3R

    **EDIT** I have the Rev. 1.1 with f4 bios

    Processor: Intel Core 2 Duo E8500 E0 - Stock everything
    Memory: OCZ Reaper HPC (4x2GB or 8GB) DDR2 1066 5-5-5-15 @ 1.8 V
    Video Card: MSI GTX-260 OC
    PSU: OCZ Fatal1ty 700 watt
    HSF: Arctic Cooler 7 Pro - CPU Idle/load temps = 30/39

    Current Bios Settings: everything left to default. Nothing changed yet.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio ..........................: 9x
    Fine CPU Clock Ratio.....................: +0.5
    CPU Frequency ...........................: 3.16Ghz (333x9.5)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 333MHz
    PCI Express Frequency (Mhz) .........: Auto
    C.I.A.2 .................................:[Disabled]


    Advanced <st1:street w:st="on"><st1:address w:st="on">Clock Control
    CPU Clock Drive</st1:address></st1:street>...........................:<st1:street w:st="on"><st1:address w:st="on">800
    PCI Express Clock Drive</st1:address></st1:street>.................:900
    CPU Clock Skew (ps)....................:0
    MCH Clock Skew (ps)...................:0


    DRAM Performance Control
    Performance Enhance...................: Turbo
    Extreme Memory Profile (X.M.P.).....: auto
    (G)MCH Frequency Latch...............: auto
    System Memory Multiplier ..............: auto<o:p></o:p>

    Memory Frequency (Mhz) ..............: 1066
    DRAM Timing Selectable ................: auto<o:p></o:p>

    <o:p> </o:p>
    <o:p> </o:p>
    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15

    Set all highest below first then lower later

    Advanced Timing Control
    tRRD...........................................4 auto
    tWTR..........................................4 auto
    tWR............................................6 6<o:p></o:p>

    tRFC...........................................72 50
    tRTP...........................................4 auto
    Command Rate (CMD) ....................0 2<o:p></o:p>



    Channel A
    Static tRead Value.........................:6 auto
    tRD Phase0 Adjustment...................:0 auto
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment .................:0 Auto
    tRD Phase3 Adjustment..................:0 Auto
    Trd2rd(Different Rank)....................:8 Auto
    Twr2wr(Different Rank)...................:8 Auto
    Twr2rd(Different Rank)...................:7 Auto
    Trd2wr(Same/Diff Rank)..................:9 Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    DDR Write Training..........................:Auto

    Driving Strength Profile.....................:Auto

    Channel B
    Static tRead Value.........................:6 auto
    tRD Phase0 Adjustment...................:0 auto
    tRD Phase1 Adjustment...................:0 auto
    tRD Phase2 Adjustment .................:0Auto
    tRD Phase3 Adjustment..................:0Auto
    Trd2rd(Different Rank)....................:8 Auto
    Twr2wr(Different Rank)...................:8 Auto
    Twr2rd(Different Rank)...................:7 Auto
    Trd2wr(Same/Diff Rank)..................:9 Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    DDR Write Training.........................:auto

    Motherboard Voltage Control
    Voltage Type.………... line calibration currently set to Disabled

    CPU
    CPU Vcore….……….........................:1.25000V Auto
    CPU Termination…..... 1.200V*.......: Auto
    CPU PLL…………………....1.500V*.......: Auto
    CPU Reference.…………....0.760V*.......: Auto


    MCH/ICH
    MCH Core…………….....1.100V...........: Auto
    MCH Reference….…….0.760V...........:Auto
    MCH/DRAM Ref.…......0.900V...........:Auto
    ICH I/O……………….....1.500V............:Auto
    ICH Core…………...……1.100V............:Auto

    DRAM
    DRAM Voltage ……....1.800V auto

    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................:
    Enabled
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: Enabled
    Virtualization Technology................: Enabled
    Last edited by randpost; 12-19-2008 at 05:05 PM.

  2. #2
    Join Date
    Dec 2008
    Posts
    2

    Default Re: New to overclocking (NEED HELP) EP45-UD3R

    2gbx4 Ram... I would think it would require a little more tweaking than usual.

    I've been looking at other peoples settings with my CPU and MB and I cant get a stable overclock.

    Best I get is 3.6ghz with all other settings at default. Stable intel burn for 1 hour and 15 hrs orthos.

    would like to hit 4ghz if anyone is willing to help me out. thanks in advance.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •