Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: ex58-ud5,when installing xp,how to set SATA RAID/AHCI MODE?




  1. #1
    Join Date
    Dec 2008
    Posts
    13

    Default ex58-ud5,when installing xp,how to set SATA RAID/AHCI MODE?

    when i try to a clean installation of XP, how to set in BIOS of SATA RAID/AHCI MODE?

    it seems to me that this item has to be disable so that the XP can be installed.

    my XP installation CD already has the SATA drivers. so after installation, the NCQ is functional. the only tiny problem is that the hot swap function is not working.....

    i tried a few times...just could not enable the hot swap function....

    the floppy had gone years ago, so installing the driver from floppy disk not possible for me.

  2. #2
    Join Date
    Apr 2008
    Posts
    942

    Default Re: ex58-ud5,when installing xp,how to set SATA RAID/AHCI MODE?

    Intel® Matrix Storage Manager - Do I need to use the F6 installation method?

    the floppy had gone years ago, so installing the driver from floppy disk not possible for me.
    I'm sure you have a USB port? So you can use a USB Flash memory stick.
    GA-P35C-DS3R Rev2.0 F11 bios, E8200 (@3.0Ghz), OCZ DDR3 PC3-10666 Reaper 4GB (@1200Mhz), Xonar D1, 8800GTS 512, Corsair HX520 (Single 12volt line, Max 40A), WDC 3200aaks/5000aaks in AHCI mode, Vista 64 Premium.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •