Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: q6600 3.4ghz OC




  1. #1
    Join Date
    Nov 2008
    Posts
    71

    Default q6600 3.4ghz OC

    hey i have a q6600 at 3.2ghz on a ep45 ds3l board. and i want to get to 3.4ghz what settings should i change here are my stable settings right now

    cpu vcore - 1.325 (1.28 in windows)
    cpu termination - 1.3
    cpu pll - 1.550
    cpu reference - auto

    mch core - 1.16
    mch reference - auto
    ich i/o - auto

    and if i set it to 425x8 i cant get the ram to 1066mhz. the closest is 1063mhz is that fine?

  2. #2
    Join Date
    Nov 2008
    Posts
    71

    Default Re: q6600 3.4ghz OC

    bump

  3. #3
    flyfisher is offline Member
    Join Date
    Dec 2008
    Location
    South Central PA
    Posts
    191

    Default Re: q6600 3.4ghz OC

    If you have DRR2-1066 RAM it is fine to run it at 1063. Make sure you have set Vdimm and timings to whatever the manufacturer spec is. You will also probably need to bump the MHC and Vcore up a bit too. I'd try 1.3v mch and 1.4 vcore and if stable then lower them and test stability again.

  4. #4
    Join Date
    Nov 2008
    Posts
    71

    Default Re: q6600 3.4ghz OC

    prime95 fails with the setting s you told me to do. should i try upping the cpu termination voltage? and i have the ep45 ds3l mobo and it says it can handle up to 1600mhz in the fsb. but with 3.4ghz it goes to 1700mhz. will my mobo handle that?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •