Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Interested in using Easy Tune 5 Pro for overclocking




  1. #1
    Join Date
    Dec 2008
    Posts
    1

    Default Interested in using Easy Tune 5 Pro for overclocking

    Hi! I have the following CPu specifications and I would like to use Easy Tune 5 Pro which comes with my motherboard:

    Intel e8400 3.0Ghz Proc
    Gigabyte GA-G31M-S2L Motherboard
    2 x 2GB DDR2 800 Kingston Memory
    Palit ATi Radeon 4870 GPU
    500W HEC Powersupply


    Is it safe to overclock using Easy Tune 5 to crank my e8400 to 3.6Ghz using standard Intel processor cooler? Please advise. I also need to know if I need to use Easy tune 6 for my e8400. Any answer would be appreciated.

  2. #2

    Default Re: Interested in using Easy Tune 5 Pro for overclocking

    It's better if you do it manually in your BIOS and do it gradually as well.

    You say crank up like you want to just set it to 3.6 one time.

    That's a no no.
    Nothing is impossible... Just mathematically improbable..

    "The best defense against computer viruses might not even be antivirus software, but a crafty combination of education and common sense."

    Intel Pentium e5200 @ 3.8HZ (380 X 10)
    Giga-byte GA-EP35-DS3L
    Mushkin 4GB DDR2 800 @ 760MHZ 4-4-3-10 @ +0.3v
    SAPPHIRE 100245L Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16
    Seagate 160GB @ 7200rpm
    SB Audigy2
    Corsair 520HX
    Super Antec Lanboy
    Windows 7 Ultimate 64bit RTM
    Acer AL2216Wbd 22"

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •