Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 7 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 62

Thread: UD3P and Q9550= SWEET!




  1. #31
    Join Date
    Dec 2008
    Location
    Denver
    Posts
    56

    Default Re: UD3P and Q9550= SWEET!

    Your right as I just pulled 4gb out and it seems to me much more stable per your settings.

    Edit: Guess I was getting greedy lol.
    Last edited by Prospector; 01-12-2009 at 12:45 AM.
    Q9550 EO 4.0ghz 475x8.5 1.325v LLC on
    Gigabyte EP45-UD3P f9c OCZ Vendetta2 w/bolt kit
    4x2gb OCZ PC2 8500 5-6-6-18 1.9v @950mhz
    Asus 4870 512 Scythe Musashi
    Ocz Gamextream 600w
    2x300gb Velociraptors RAID0
    CoolerMaster Stacker 830
    Dynex 32" HDTV on HDMI
    Vista Premium 64-bit

  2. #32
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: UD3P and Q9550= SWEET!

    I agree 8GB will take some further tweaking. Dont give up on it though, just make a 4GB and a 8GB profile and then work on the 8GB profile when you have time

  3. #33
    Join Date
    Dec 2008
    Location
    Denver
    Posts
    56

    Default Re: UD3P and Q9550= SWEET!

    I know these DDR800 sticks will do DDR1000 @ 1.8v on a P35 E8400 combo 2x2gb configuration.I read somewhere that P35 handles 4 sticks as well as P45 chipset but P45 can crank 2 sticks higher. I'm having fun just trying to see what this rig can do. Plus Iv'e got a 120mm side fan on the 4870 when I decide to crank that up lol.
    Q9550 EO 4.0ghz 475x8.5 1.325v LLC on
    Gigabyte EP45-UD3P f9c OCZ Vendetta2 w/bolt kit
    4x2gb OCZ PC2 8500 5-6-6-18 1.9v @950mhz
    Asus 4870 512 Scythe Musashi
    Ocz Gamextream 600w
    2x300gb Velociraptors RAID0
    CoolerMaster Stacker 830
    Dynex 32" HDTV on HDMI
    Vista Premium 64-bit

  4. #34
    Join Date
    Dec 2008
    Location
    Denver
    Posts
    56

    Default Re: UD3P and Q9550= SWEET!

    Update: 475x8.5 1.268v LLC enabled 12 hours Prime95 Blend passed!

    Max load temps 53-56c
    Last edited by Prospector; 01-13-2009 at 12:30 AM.
    Q9550 EO 4.0ghz 475x8.5 1.325v LLC on
    Gigabyte EP45-UD3P f9c OCZ Vendetta2 w/bolt kit
    4x2gb OCZ PC2 8500 5-6-6-18 1.9v @950mhz
    Asus 4870 512 Scythe Musashi
    Ocz Gamextream 600w
    2x300gb Velociraptors RAID0
    CoolerMaster Stacker 830
    Dynex 32" HDTV on HDMI
    Vista Premium 64-bit

  5. #35
    flyfisher is offline Member
    Join Date
    Dec 2008
    Location
    South Central PA
    Posts
    191

    Default Re: UD3P and Q9550= SWEET!



    Congrats! I knew you could do it!

  6. #36
    Join Date
    Dec 2008
    Location
    Denver
    Posts
    56

    Default Re: UD3P and Q9550= SWEET!

    Thanks. Guess I better change the specs in my sig.
    Q9550 EO 4.0ghz 475x8.5 1.325v LLC on
    Gigabyte EP45-UD3P f9c OCZ Vendetta2 w/bolt kit
    4x2gb OCZ PC2 8500 5-6-6-18 1.9v @950mhz
    Asus 4870 512 Scythe Musashi
    Ocz Gamextream 600w
    2x300gb Velociraptors RAID0
    CoolerMaster Stacker 830
    Dynex 32" HDTV on HDMI
    Vista Premium 64-bit

  7. #37
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  8. #38
    Join Date
    Dec 2008
    Posts
    9

    Default Re: UD3P and Q9550= SWEET!

    I'm finally stable at 4ghz after testing with Prime95 for 7 hours and 1 hour with OCCT, my voltage core is set to 1.32 and my load temps are 62 max load.. I'd like to thank all of you guys for all the information you've given me as it has helped me out alot, i can't thank you guys enough..

    @Lsdmeasap, thanks for your advice on the VTT and CPU PLL!!!! These were set way too high on easytune6!! I'm surprised i didn't nuke my chip, i can't thank you enough for saving me from having to buy another processor..






    *****Motherboard Intelligent Tweaker (M.I.T.)******
    Robust Graphics Booster.........................[ Auto ]
    CPU Clock Ratio.................................[ 8 ]
    Fine CPU Clock Ratio............................[ + 0.5 ]
    CPU Frequency 4.0GHz............................[ 471 x 8.5 ]

    ******Clock Chip Control******
    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 471 ]
    PCI Express Frequency (Mhz).....................[ 100 ]
    C.I.A 2 [Disabled]

    ******Advanced Clock Control******
    CPU Clock Drive.................................[ 800mv ]
    PCI Express Clock Drive.........................[ 900mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 0ps ]

    ******DRAM Performance Control******
    Performance Enhance.............................[Standard]
    (G) MCH Frequency Latch.........................[ 333MHz]
    System Memory Multipler.........................[ 2.00B]
    Memory Frequency 800............................[ 942]
    DRAM Timing Selectable..........................[ Manual]
    CAS Latency Time................................[ 5]
    tRCD............................................[ 5]
    tRP.............................................[ 5]
    tRAS............................................[ 15 ]

    ******Advanced Timing Control******
    RRD............................................[ Auto ]
    tWTR............................................[ Auto ]
    tWR.............................................[ Auto ]
    tRFC............................................[ Auto ]
    tRTP............................................[ Auto ]
    Command Rate (cmd)..............................[ Auto ]

    ******Channel A Timing Settings******
    Static tRead Value [ 10 ] ...............[ 9 ]
    tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase3 Adjustment [ 0 ] ................[ Auto ]
    tRD 2rd (Differnt Rank) [ 6 ] ................[ Auto ]
    tWR 2wr (Differnt Rank) [ 6 ] ................[ Auto ]
    tWR 2rd (Differnt Rank) [ 5 ] ................[ Auto ]
    tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto ]
    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]

    ******Channel A Driving Settings******
    Drive Strength Profile..........................[ Auto ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]
    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]

    ******Channel B Timing Settings******
    Static tRead Value [ 10 ] ...............[ 9 ]
    tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase3 Adjustment [ 0 ] ................[ Auto ]
    tRD 2rd (Differnt Rank) [ 6 ] ................[ Auto ]
    tWR 2wr (Differnt Rank) [ 6 ] ................[ Auto ]
    tWR 2rd (Differnt Rank) [ 5 ] ................[ Auto ]
    tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto ]
    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]

    ******Channel B Driving Settings******
    Drive Strength Profile..........................[ Auto ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]
    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]

    ******Motherboard Voltage Control******
    Load-Line Calibration...........................[ Enabled ]
    CPU Vcore [ 1.21250 ]...................[ 1.3625 ]
    CPU Termination [ 1.20 ]...................[ 1.32 ]
    CPU PLL [ 1.50 ]...................[ 1.50 ]
    CPU Reference [ 0.760 ]...................[ 0.83 ]
    MCH Core [ 1.100 ]...................[ 1.38]
    MCH Reference [ 0.760 ]...................[ 0.83 ]
    MCH/DRAM Refernce [ 0.900 ]...................[1.00]
    ICH I/O [ 1.500 ]...................[ 1.500 ]
    ICH Core [ 1.100 ]...................[ 1.100]
    DRAM Voltage [ 1.800 ]...................[ 1.00]
    DRAM Termination [ 0.900 ]...................[1.00]
    Channel A Ref [ 0.900 ]...................[ 1.00]
    Channel B Ref [ 0.900 ]...................[1.00]
    Last edited by elusiv1; 01-16-2009 at 06:49 AM.
    My Build:

    Q9550 C1 @ 3.83ghz vcore @ 1.31
    OCZ Vendetta 2 Cooler
    Gigabyte EP45-UD3P
    4GB G.skill DDR2 1066 2.0V
    VisionTek 4870 X2(ownage)
    1TB Samsung Spinpoint Sata/3.0 HD
    LG Blu-ray drive
    NZXT Guardian Case
    Hannspree 28" LCD

    http://valid.canardpc.com/show_oc.php?id=484005

  9. #39
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: UD3P and Q9550= SWEET!

    Thanks for the kind words!

    I do have to let you know that is alot of Auto's still so your PC is for sure not at it's best performance levels that it could be. But settings everything and all those timings and tweaking/testing/tweaking is for sure time consuming and something we cannot all do.


    Looks good though for sure, good job!

  10. #40
    Join Date
    Dec 2008
    Posts
    9

    Default Re: UD3P and Q9550= SWEET!

    Thanks, i'll continue to do some more tweaking and keep you up on what i've changed...
    My Build:

    Q9550 C1 @ 3.83ghz vcore @ 1.31
    OCZ Vendetta 2 Cooler
    Gigabyte EP45-UD3P
    4GB G.skill DDR2 1066 2.0V
    VisionTek 4870 X2(ownage)
    1TB Samsung Spinpoint Sata/3.0 HD
    LG Blu-ray drive
    NZXT Guardian Case
    Hannspree 28" LCD

    http://valid.canardpc.com/show_oc.php?id=484005

Page 4 of 7 FirstFirst ... 23456 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •