Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 7 FirstFirst ... 4567 LastLast
Results 51 to 60 of 62

Thread: UD3P and Q9550= SWEET!




  1. #51
    Join Date
    Feb 2009
    Posts
    3

    Default Re: UD3P and Q9550= SWEET!

    I think I am on to something. I have it at 3.95ghz now and just ran it through 5 passes of linpack. I will prime it tomorrow and do more passes of linpack just to make sure.

    It was at 1.264 vcore at load. The only thing I would want to do yet is get me memory up to speed. I have it at 333 and 2.00b. Sorry I don't know all of the fancy terminology for straps and what not. vtt was at 1.3 and mch was at 1.3.
    Q9550 | True 120 | UD3P | 4g OCZ Platinum DDR2 1066 | GeForce 9800GT | 2 x 500gb raid 0

  2. #52
    Join Date
    Dec 2008
    Location
    Denver
    Posts
    56

    Default Re: UD3P and Q9550= SWEET!

    Looks like I might get 8gb of DDR800 to run at 950 yet. Just finished a run of OCCT v3.0 no errors.I'll try Linpack and see what happens lol.

    Edit: Dropped fsb to 471x8.5 for 4.0ghz with all 8gb in Priming for 4 hours so far.
    Last edited by Prospector; 02-02-2009 at 03:18 AM.
    Q9550 EO 4.0ghz 475x8.5 1.325v LLC on
    Gigabyte EP45-UD3P f9c OCZ Vendetta2 w/bolt kit
    4x2gb OCZ PC2 8500 5-6-6-18 1.9v @950mhz
    Asus 4870 512 Scythe Musashi
    Ocz Gamextream 600w
    2x300gb Velociraptors RAID0
    CoolerMaster Stacker 830
    Dynex 32" HDTV on HDMI
    Vista Premium 64-bit

  3. #53
    Join Date
    Feb 2009
    Posts
    3

    Default Re: UD3P and Q9550= SWEET!

    Here are my settings so far. I haven't touch any of the advanced timings for the memory. I would like to get the memory up to at least 1066 if not 1130. The memory is ocz platinum 2x2gb ddr2 1066. Right now the cpu is running at 3.95 with what I think would be fairly low voltages. If I try to up the fsb to get 4.0 it isn't stable so I will have to add a little more voltage somewhere. My temps are staying right around 45-51c full load.

    Anyway here is my template. Any help on getting my ram tuned would be greatly appreciated.


    Code:
    ******Motherboard Intelligent Tweaker (M.I.T.)******<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    Robust Graphics Booster.........................[ Auto     ]<o:p></o:p>
    CPU Clock Ratio.................................[ 8        ]<o:p></o:p>
    Fine CPU Clock Ratio............................[ + 0.5    ]<o:p></o:p>
    CPU Frequency 4.0GHz............................[ 465 x 8.5  ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    ******Clock Chip Control******<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    CPU Host Clock Control..........................[ Enabled  ]<o:p></o:p>
    CPU Host Frequency (Mhz)........................[ 465      ]<o:p></o:p>
    PCI Express Frequency (Mhz).....................[ 100      ]<o:p></o:p>
    C.I.A 2 [Disabled] <o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    ******Advanced Clock Control******<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    CPU Clock Drive.................................[ 800mv   ]<o:p></o:p>
    PCI Express Clock Drive.........................[ 900mv   ]<o:p></o:p>
    CPU Clock Skew..................................[ 0ps     ]<o:p></o:p>
    MCH Clock Skew..................................[ 0ps     ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    ******DRAM Performance Control******<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    Performance Enhance.............................[ Turbo    ]<o:p></o:p>
    (G) MCH Frequency Latch.........................[ 333MHz   ]<o:p></o:p>
    System Memory Multipler.........................[ 2.00D    ]<o:p></o:p>
    Memory Frequency 800............................[ 930      ]<o:p></o:p>
    DRAM Timing Selectable..........................[ Manual   ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    CAS Latency Time................................[ 5        ]<o:p></o:p>
    tRCD............................................[ 5        ]<o:p></o:p>
    tRP.............................................[ 5        ]<o:p></o:p>
    tRAS............................................[ 15       ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    ******Advanced Timing Control******<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    tRRD............................................[ 3        ]<o:p></o:p>
    tWTR............................................[ 3        ]<o:p></o:p>
    tWR.............................................[ 6        ]<o:p></o:p>
    tRFC............................................[ 52       ]<o:p></o:p>
    tRTP............................................[ 3        ]<o:p></o:p>
    Command Rate (cmd)..............................[ 2T       ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    ******Channel A Timing Settings******     <o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    Static tRead Value        [ 10 ] ...............[ 10        ]<o:p></o:p>
    tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]<o:p></o:p>
    tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]<o:p></o:p>
    tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]<o:p></o:p>
    tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto     ]<o:p></o:p>
    tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto     ]<o:p></o:p>
    tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto     ]<o:p></o:p>
    tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto     ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    Dimm 1 Clock Skew Control.......................[ Auto     ]<o:p></o:p>
    Dimm 2 Clock Skew Control.......................[ Auto     ]<o:p></o:p>
    DDR Write Training..............................[ Auto     ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    ******Channel A Driving Settings****** <o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    Drive Strength Profile..........................[ Auto     ]<o:p></o:p>
    Data Driving Pull Up Level......................[ Auto     ]<o:p></o:p>
    cmd Driving Pull Up Level.......................[ Auto     ]<o:p></o:p>
    ctrl Driving Pull Up Level......................[ Auto     ]<o:p></o:p>
    clk Driving Pull Up Level.......................[ Auto     ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    Data Driving Pull Down Level....................[ Auto     ]<o:p></o:p>
    cmd Driving Pull Down Level.....................[ Auto     ]<o:p></o:p>
    ctrl Driving Pull Down Level....................[ Auto     ]<o:p></o:p>
    clk Driving Pull Down Level.....................[ Auto     ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    ******Channel B Timing Settings******     <o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    Static tRead Value        [ 10 ] ...............[ 10       ]<o:p></o:p>
    tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]<o:p></o:p>
    tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]<o:p></o:p>
    tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]<o:p></o:p>
    tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    tRD 2rd (Differnt Rank)   [ 6 ] ................[ Auto     ]<o:p></o:p>
    tWR 2wr (Differnt Rank)   [ 6 ] ................[ Auto     ]<o:p></o:p>
    tWR 2rd (Differnt Rank)   [ 5 ] ................[ Auto     ]<o:p></o:p>
    tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto     ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    Dimm 1 Clock Skew Control.......................[ Auto     ]<o:p></o:p>
    Dimm 2 Clock Skew Control.......................[ Auto     ]<o:p></o:p>
    DDR Write Training..............................[ Auto     ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    ******Channel B Driving Settings****** <o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    Drive Strength Profile..........................[ Auto     ]<o:p></o:p>
    Data Driving Pull Up Level......................[ Auto     ]<o:p></o:p>
    cmd Driving Pull Up Level.......................[ Auto     ]<o:p></o:p>
    ctrl Driving Pull Up Level......................[ Auto     ]<o:p></o:p>
    clk Driving Pull Up Level.......................[ Auto     ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    Data Driving Pull Down Level....................[ Auto     ]<o:p></o:p>
    cmd Driving Pull Down Level.....................[ Auto     ]<o:p></o:p>
    ctrl Driving Pull Down Level....................[ Auto     ]<o:p></o:p>
    clk Driving Pull Down Level.....................[ Auto     ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    ******Motherboard Voltage Control******<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    Load-Line Calibration...........................[ Enabled ]<o:p></o:p>
    CPU Vcore         [ 1.21250 ]...................[ 1.300   ]<o:p></o:p>
    CPU Termination   [ 1.20    ]...................[ 1.300   ]<o:p></o:p>
    CPU PLL           [ 1.50    ]...................[ 1.500   ]<o:p></o:p>
    CPU Reference     [ 0.760   ]...................[ 0.863   ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    MCH Core          [ 1.100   ]...................[ 1.300   ]<o:p></o:p>
    MCH Reference     [ 0.760   ]...................[ 0.863   ]<o:p></o:p>
    MCH/DRAM Refernce [ 0.900   ]...................[ 0.960   ]<o:p></o:p>
    ICH I/O           [ 1.500   ]...................[ 1.500   ]<o:p></o:p>
    ICH Core          [ 1.100   ]...................[ 1.100   ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> <!--[endif]--><o:p></o:p>
    DRAM Voltage      [ 1.800   ]...................[ 2.100   ]<o:p></o:p>
    DRAM Termination  [ 0.900   ]...................[ 0.900   ]<o:p></o:p>
    Channel A Ref     [ 0.900   ]...................[ 0.900   ]<o:p></o:p>
    Channel B Ref     [ 0.900   ]...................[ 0.900   ]<o:p></o:p>
    <!--[if !supportEmptyParas]--> </pre>
    Q9550 | True 120 | UD3P | 4g OCZ Platinum DDR2 1066 | GeForce 9800GT | 2 x 500gb raid 0

  4. #54
    Join Date
    Dec 2008
    Location
    Denver
    Posts
    56

    Default Re: UD3P and Q9550= SWEET!

    Just finished a 25 hour run of Prime95 Blend 4.0ghz with all 8gb of ram
    @DDR 942 I think I'll leave it there lol.
    Q9550 EO 4.0ghz 475x8.5 1.325v LLC on
    Gigabyte EP45-UD3P f9c OCZ Vendetta2 w/bolt kit
    4x2gb OCZ PC2 8500 5-6-6-18 1.9v @950mhz
    Asus 4870 512 Scythe Musashi
    Ocz Gamextream 600w
    2x300gb Velociraptors RAID0
    CoolerMaster Stacker 830
    Dynex 32" HDTV on HDMI
    Vista Premium 64-bit

  5. #55
    Join Date
    Dec 2008
    Location
    Denver
    Posts
    56

    Default Re: UD3P and Q9550= SWEET!

    Code:

    ******Motherboard Intelligent Tweaker (M.I.T.)******
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    Robust Graphics Booster.........................[ Auto ]
    CPU Clock Ratio.................................[ 8 ]
    Fine CPU Clock Ratio............................[ + 0.5 ]
    CPU Frequency 4.0GHz............................[ 471 x 8.5 ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    ******Clock Chip Control******
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 471 ]
    PCI Express Frequency (Mhz).....................[ 100 ]
    C.I.A 2 [Disabled]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    ******Advanced Clock Control******
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    CPU Clock Drive.................................[ 800mv ]
    PCI Express Clock Drive.........................[ 900mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 0ps ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    ******DRAM Performance Control******
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    Performance Enhance.............................[ Turbo ]
    (G) MCH Frequency Latch.........................[ 400MHz ]
    System Memory Multipler.........................[ 2.00D ]
    Memory Frequency 800............................[ 942 ]
    DRAM Timing Selectable..........................[ Manual ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    CAS Latency Time................................[ 5 ]
    tRCD............................................[ 5 ]
    tRP.............................................[ 5 ]
    tRAS............................................[ 15 ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    ******Advanced Timing Control******
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    tRRD............................................[ 3 ]
    tWTR............................................[ 3 ]
    tWR.............................................[ 6 ]
    tRFC............................................[ 54 ]
    tRTP............................................[ 3 ]
    Command Rate (cmd)..............................[ auto ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    ******Channel A Timing Settings******
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    Static tRead Value [ 10 ] ...............[ 9 ]
    tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase3 Adjustment [ 0 ] ................[ Auto ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    tRD 2rd (Differnt Rank) [ 6 ] ................[ Auto ]
    tWR 2wr (Differnt Rank) [ 6 ] ................[ Auto ]
    tWR 2rd (Differnt Rank) [ 5 ] ................[ Auto ]
    tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    ******Channel A Driving Settings******
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    Drive Strength Profile..........................[ Auto ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    ******Channel B Timing Settings******
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    Static tRead Value [ 10 ] ...............[ 9 ]
    tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
    tRD Phase3 Adjustment [ 0 ] ................[ Auto ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    tRD 2rd (Differnt Rank) [ 6 ] ................[ Auto ]
    tWR 2wr (Differnt Rank) [ 6 ] ................[ Auto ]
    tWR 2rd (Differnt Rank) [ 5 ] ................[ Auto ]
    tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    ******Channel B Driving Settings******
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    Drive Strength Profile..........................[ Auto ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    ******Motherboard Voltage Control******
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    Load-Line Calibration...........................[ disabled ]
    CPU Vcore [ 1.21250 ]...................[ 1.325 ]
    CPU Termination [ 1.20 ]...................[ 1.30 ]
    CPU PLL [ 1.50 ]...................[ 1.50 ]
    CPU Reference [ 0.760 ]...................[ 0.863 ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    MCH Core [ 1.100 ]...................[ 1.36 ]
    MCH Reference [ 0.760 ]...................[ 0.863 ]
    MCH/DRAM Refernce [ 0.900 ]...................[ 0.970 ]
    ICH I/O [ 1.500 ]...................[ 1.500 ]
    ICH Core [ 1.100 ]...................[ 1.100 ]
    <!--[if !supportEmptyParas]--> <!--[endif]-->
    DRAM Voltage [ 1.800 ]...................[ 1.820 ]
    DRAM Termination [ 0.900 ]...................[ 0.960 ]
    Channel A Ref [ 0.900 ]...................[ 0.970 ]
    Channel B Ref [ 0.900 ]...................[ 0.970 ]
    <!--[if !
    Q9550 EO 4.0ghz 475x8.5 1.325v LLC on
    Gigabyte EP45-UD3P f9c OCZ Vendetta2 w/bolt kit
    4x2gb OCZ PC2 8500 5-6-6-18 1.9v @950mhz
    Asus 4870 512 Scythe Musashi
    Ocz Gamextream 600w
    2x300gb Velociraptors RAID0
    CoolerMaster Stacker 830
    Dynex 32" HDTV on HDMI
    Vista Premium 64-bit

  6. #56
    Join Date
    Dec 2008
    Location
    Denver
    Posts
    56

    Default Re: UD3P and Q9550= SWEET!

    edit
    Last edited by Prospector; 02-03-2009 at 08:15 AM.
    Q9550 EO 4.0ghz 475x8.5 1.325v LLC on
    Gigabyte EP45-UD3P f9c OCZ Vendetta2 w/bolt kit
    4x2gb OCZ PC2 8500 5-6-6-18 1.9v @950mhz
    Asus 4870 512 Scythe Musashi
    Ocz Gamextream 600w
    2x300gb Velociraptors RAID0
    CoolerMaster Stacker 830
    Dynex 32" HDTV on HDMI
    Vista Premium 64-bit

  7. #57
    Join Date
    Jan 2009
    Location
    Israel
    Posts
    139

    Default Re: UD3P and Q9550= SWEET!

    How the hell are you getting 4GHz stable with 1.325 Vcore and 1.3 CPU Term?!

    Here's where I'm at now:



    LLC is enabled and as you can see CPU-Z reads voltage of 1.376 which is quite good, but my ET6 setting is 1.40

    This is so far stable in Prime95 for the last 5 hours (I don't wanna run Intel Burn Test and fry the CPU, heard temps go insanely high)
    I tried this as well:

    4.0 GHz Stable (Small FFT 30 Mins/Large FFT 30 Mins)

    470 FSB
    CPU PLL: 1.5
    CPU Term: 1.34
    CPU VCore: 1.4375
    MCH Core: 1.36

    This passed 30 minutes of Small and Large FFT testm but failed blend after approximately 3 hours, I don't know what the error was, computer just shut itself down, when I woke up it was off.

    I really wanna get 4GHz at 1.3X Vcore, I'm using the exact same Q9550 CPU (E0 Stepping), same board and I even have the same Heatsink as you...

    Memory is 4GB (2X2GB) G.Skill DDR2-1066 PI Edition CL 5-5-5-15
    Latch set to 400MHz
    Multi is 2.00D
    DRAM Voltage 2.100V
    PCI-EX Hard set to 100MHz

    Thoughs?

    P.S.

    I noticed that fitting this Heatsink made a little bend on my motherboard, not really major, but still a bent, can it hurt the performance? I didn't use a bracket but rather struggled with the push pins *sigh*....
    Last edited by Zach_; 02-03-2009 at 07:27 AM.

  8. #58
    Join Date
    Dec 2008
    Location
    Denver
    Posts
    56

    Default Re: UD3P and Q9550= SWEET!

    I must have gotten a great chip lol.If I enable LLC I can set vcore to 1.268 in bios. You may have to fiddle with the reference percent for cpu and mch too.

    edit: I hate the pushpins so I got a bolt on kit I think it helps lower temps.I replaced the stock fan with a Panaflo 120x38mm hi speed fan on a controller
    Last edited by Prospector; 02-03-2009 at 07:51 AM.
    Q9550 EO 4.0ghz 475x8.5 1.325v LLC on
    Gigabyte EP45-UD3P f9c OCZ Vendetta2 w/bolt kit
    4x2gb OCZ PC2 8500 5-6-6-18 1.9v @950mhz
    Asus 4870 512 Scythe Musashi
    Ocz Gamextream 600w
    2x300gb Velociraptors RAID0
    CoolerMaster Stacker 830
    Dynex 32" HDTV on HDMI
    Vista Premium 64-bit

  9. #59
    Join Date
    Feb 2004
    Posts
    50

    Default Re: UD3P and Q9550= SWEET!

    Hey Prospector,

    It seems as though you found the gold. Congrats on your overclock.

  10. #60
    Join Date
    Dec 2008
    Location
    Denver
    Posts
    56

    Default Re: UD3P and Q9550= SWEET!

    Thanks now if I can just figure out this pic uploading thing I'd post some results lol.


    By prospector
    Last edited by Prospector; 02-03-2009 at 08:25 AM.
    Q9550 EO 4.0ghz 475x8.5 1.325v LLC on
    Gigabyte EP45-UD3P f9c OCZ Vendetta2 w/bolt kit
    4x2gb OCZ PC2 8500 5-6-6-18 1.9v @950mhz
    Asus 4870 512 Scythe Musashi
    Ocz Gamextream 600w
    2x300gb Velociraptors RAID0
    CoolerMaster Stacker 830
    Dynex 32" HDTV on HDMI
    Vista Premium 64-bit

Page 6 of 7 FirstFirst ... 4567 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •