Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: EP45-UD3R and Q6600 B3 Overclock Reference




  1. #11
    Join Date
    Feb 2008
    Posts
    97

    Default Re: EP45-UD3R and Q6600 B3 Overclock Reference

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 9x
    CPU Frequency ...........................: 3.0GHz (334x9)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 334Mhz
    PCI Express Frequency (Mhz) .........: 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: auto
    PCI Express Clock Drive.................: auto
    CPU Clock Skew (ps)....................: auto
    MCH Clock Skew (ps)...................: auto

    DRAM Performance Control
    Performance Enhance...................: [Standard]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [334]
    System Memory Multiplier ..............: auto
    Memory Frequency (Mhz) ..............: 1002
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS.........................................15

    Advanced Timing Control
    tRRD...........................................aut o
    tWTR..........................................auto
    tWR............................................aut o
    tRFC...........................................aut o
    tRTP...........................................aut o
    Command Rate (CMD) ....................2t

    Driving Strength Profiles
    Driving Strength ............................

    Channel A
    Static tRead Value.........................:Auto
    tRD Phase0 Adjustment...................Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Channel B
    Static tRead Value.........................:Auto
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.332 ACTUAL (under pc health)
    CPU Termination…............:1.3
    CPU PLL…………………...........:1.5
    CPU Referen.…………..........: Auto
    CPU Reference2……….......:Auto

    MCH/ICH
    MCH Core……………................: 1.2
    MCH Reference….……............; Auto
    MCH/DRAM Ref.….................: Auto
    ICH I/O……………….................: auto
    ICH Core…………...……............:1.2

    DRAM
    DRAM Voltage ……....1.800V............: 2.1 (2.08v actual)
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Alright. I have this one problem on these settings. It passes every test (orthos/memtest) but if I shut down for a few hours and start up the computer, the settings would revert back to stock (Cpu and memory). What's the deal?

  2. #12
    Join Date
    Feb 2008
    Posts
    97

    Default Re: EP45-UD3R and Q6600 B3 Overclock Reference

    DRAM Voltage is now 2.12 or 2.096 actual. That is the closest to 2.1V I can get. MCH Core is at 1.22.

  3. #13
    Join Date
    Feb 2008
    Posts
    97

    Default Re: EP45-UD3R and Q6600 B3 Overclock Reference

    Actually, that didn't turn out so well. I'm on 2.08 for dram and 1.2 for mch. mch doesn't respond well if it goes higher than 1.2. also, i let the timings of ram on auto to see if theres any problem now.

    1000mhz 5-7-7-19 2T .

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3R and Q6600 B3 Overclock Reference

    I think you have some settings listed wrong. There is no Memory multi on the 333 strap that would equal 334 X ? = 1000

    There is only 2.00, 2.40, 3.20, and 4.00 and for 333 FSB that would be as follows +1 for your 334 FSB

    2.00=667
    2.40=800
    3.20=1066
    4.00=1333

    Just thought I would make this point to you since you posted this as a reference for others

    So you either just have the wrong Memory Freq Listed above, or you are confused about what strap you set. You should just put MCH Strap on Auto and use the B memory multi choices for 333 FSB

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •