Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: OC of GA-EP45-DS3L (easy tune?)




  1. #1
    Join Date
    Dec 2008
    Posts
    88

    Thumbs up OC of GA-EP45-DS3L (easy tune?)

    After days of trying to do it manual with no luck, I went to web site and downloaded newest version of easy tune. My E4500 2.2 is running cool at 2.7 (will try to go higher later) Does anyone else use easy tune? Dave.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OC of GA-EP45-DS3L (easy tune?)

    I use it to compare settings, and test things that is all. Real overclocking should always be done in the BIOS

    If you would like some help with your overclock please link me to your ram and tell me how much you have. Then fill this out with your exact settings you was trying that fail and I will advise >>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: 
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 
    PCI Express Clock Drive.................: <<< 
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  3. #3
    Join Date
    Dec 2008
    Posts
    88

    Default Re: OC of GA-EP45-DS3L (easy tune?)

    Thanks in advance for help. All the settings are default now. I have 2 sticks of 2gb of Corsair CM2X2048-6400C4DHX ram 800MHz 4-4-4-12 2.10V. Dave.

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OC of GA-EP45-DS3L (easy tune?)

    Please fill in the above template so I can know what you are using, then I will post back optimal ranges for you

  5. #5
    Join Date
    Dec 2008
    Posts
    88

    Default Re: OC of GA-EP45-DS3L (easy tune?)

    OK I will today. what is the best way to send? I saved your template to a work doc. Dave.

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OC of GA-EP45-DS3L (easy tune?)

    Ya, just copy that blank template above into a notepad and then either print it out and fill it in with a pen while you are looking at the BIOS or make note of them somehow on paper. Then come back here and paste the empty template and then fill it in with your settings and post the reply

  7. #7
    Join Date
    Dec 2008
    Posts
    88

    Default Re: OC of GA-EP45-DS3L (easy tune?)

    These are my settings, Thanks Dave.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: auto
    CPU Clock Ratio ..........................: 11X
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 2.20GHz (200 x 11)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] yes
    CPU Host Frequency (Mhz) ............: Mhz 200
    PCI Express Frequency (Mhz) .........:Set to 100 yes

    C.I.A.2 .................................:[Disabled] yes


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800mv
    PCI Express Clock Drive.................: <<< 800mv
    CPU Clock Skew (ps)....................: <<< ops
    MCH Clock Skew (ps)...................: <<< ops


    DRAM Performance Control
    Performance Enhance...................: [STANDARD] yes
    Extreme
    Memory Profile (X.M.P.).....: Disabled yes
    (G)MCH Frequency Latch...............: [Auto] yes
    System Memory Multiplier ..............: (auto)
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 4 (auto)
    tRCD ......................................... 4 (auto)
    tRP'........................................... 4 (auto)
    tRAS.......................................... 12(auto)

    Advanced Timing Control
    tRRD........................................... 3 (auto)
    tWTR.......................................... 3 (auto)
    tWR............................................ 8 (auto)
    tRFC........................................... 52 (auto)
    tRTP........................................... 3 (auto)
    Command Rate (CMD) ....................:2 yes

    Driving Strength Profiles
    Driving Strength ............................ (auto)

    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH mine are 3 (7)
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto yes
    tRD Phase2 Adjustment .................:Auto yes
    tRD Phase3 Adjustment..................:Auto yes
    Trd2rd(Different Rank)....................:Auto yes
    Twr2wr(Different Rank)...................:Auto yes
    Twr2rd(Different Rank)...................:Auto yes
    Trd2wr(Same/Diff Rank)..................:Auto yes
    Dimm1 Clock Skew Control...............:Auto ps yes
    Dimm2 Clock Skew Control...............:Auto ps yes

    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH 3 (7)
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.325 (auto) yes
    CPU Termination…..... 1.200V*.......: <<< Leave yes
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much 1.

    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>

    0.805 is auto on mine

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly <o:p></o:p>

    YES

    <o:p></o:p>

    These are AS/IS
    MCH/ICH
    MCH Core…………….....1.100V...........: <<
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............:
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  8. #8
    Join Date
    Dec 2008
    Posts
    88

    Default Re: OC of GA-EP45-DS3L (easy tune?)

    LSD Got ya my settings

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OC of GA-EP45-DS3L (easy tune?)

    Try this for 2.7 >>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: auto or fast
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 2.66GHz (8x333)

    If you want to try 3Ghz, use 9x333, just did not advise that as I am not sure how high you wanted to try. That is where I would personally start though


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] yes
    CPU Host Frequency (Mhz) ............: 333
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled] yes


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800mv
    PCI Express Clock Drive.................: <<< 900mv
    CPU Clock Skew (ps)....................: <<< ops
    MCH Clock Skew (ps)...................: <<< ops


    DRAM Performance Control
    Performance Enhance...................: [STANDARD] yes
    Extreme Memory Profile (X.M.P.).....: Disabled yes
    (G)MCH Frequency Latch...............: [Auto] yes
    System Memory Multiplier ..............: 2.40B
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 4
    tRCD ......................................... 4
    tRP'........................................... 4
    tRAS.......................................... 12

    Advanced Timing Control
    tRRD........................................... 3-4
    tWTR.......................................... 3-5
    tWR............................................ 4-6
    tRFC........................................... 52-62
    tRTP........................................... 3-5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ 800-1066, try both last benchmark/test them to see which is best

    Channel A
    Static tRead Value.........................:6/7-10 (Set higher first, 3? that is way to low if you meant 3 for sure)
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto yes
    tRD Phase2 Adjustment .................:Auto yes
    tRD Phase3 Adjustment..................:Auto yes
    Trd2rd(Different Rank)....................:Auto yes
    Twr2wr(Different Rank)...................:Auto yes
    Twr2rd(Different Rank)...................:Auto yes
    Trd2wr(Same/Diff Rank)..................:Auto yes
    Dimm1 Clock Skew Control...............:Auto ps yes
    Dimm2 Clock Skew Control...............:Auto ps yes

    Channel B
    Static tRead Value.........................:6/7-10 (Set higher first)
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.325 Please manually find and set a stable voltage, what you set will be less in windows. So whatever you got stable in Easytune set here, but a bit more. You can always lower later.

    CPU Termination…..... 1.200V*.......: <<< 1.2-1.35
    CPU PLL…………………....1.500V*.......: << 1.45-1.55

    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly
    0.805 is auto on mine Just leave the Ref's on Auto showing on the right

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly
    YES

    MCH/ICH
    MCH Core…………….....1.100V...........: << Leave or try 1.05 and then 1.15
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.5-1.6
    ICH Core…………...……1.100V............: <<<1.14-1.2

    DRAM
    DRAM Voltage ……....1.800V............: 2.0-2.1
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

  10. #10
    Join Date
    Dec 2008
    Posts
    88

    Default Re: OC of GA-EP45-DS3L (easy tune?)

    Thanks so much, I will try this after dinner tonight and let you know out come. PS do I leave to energy saver on my system? Dave.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •