Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 4 FirstFirst ... 234
Results 31 to 32 of 32

Thread: ep45-ud3p few questions




  1. #31
    Join Date
    Dec 2008
    Posts
    53

    Default Re: ep45-ud3p few questions

    (LLC) not safe.. meaning i should disable it ?


    and those are my current settings ... who passed all tests except prime95 failing after 7 hours..

    Code:
    ******Motherboard Intelligent Tweaker (M.I.T.)******
    
    Robust Graphics Booster.........................[ Auto ]
    CPU Clock Ratio.................................[ 8 ]
    Fine CPU Clock Ratio............................[ + 0.0 ]
    CPU Frequency 3.8GHz............................[ 475 x 8.0 ]
    
    ******Clock Chip Control******
    
    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 475 ]
    PCI Express Frequency (Mhz).....................[ 100 ]
    C.I.A 2 [Disabled]
    
    ******Advanced Clock Control******
    
    CPU Clock Drive.................................[ 800mv ]
    PCI Express Clock Drive.........................[ 900mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 0ps ]
    
    ******DRAM Performance Control******
    
    Performance Enhance.............................[Standard]
    (G) MCH Frequency Latch.........................[ AUTO]
    System Memory Multiplier.........................[ 2.00D]
    Memory Frequency 800............................[ 950]
    DRAM Timing Selectable..........................[ Manual]
    
    CAS Latency Time................................[ 5]
    tRCD............................................[ 5]
    tRP.............................................[ 5]
    tRAS............................................[ 15 ]
    
    ******Advanced Timing Control******
    
    tRRD............................................[ 4 ]
    tWTR............................................[ 4 ]
    tWR.............................................[ 5 ]
    tRFC............................................[ 55 ]
    tRTP............................................[ 4 ]
    Command Rate (cmd)..............................[ 2 ]
    
    ******Channel A Timing Settings******
    
    Static tRead Value  ...............[ 9 ]
    tRD Phase0 Adjustment ................[ Auto ]
    tRD Phase1 Adjustment  ................[ Auto ]
    tRD Phase2 Adjustment  ................[ Auto ]
    tRD Phase3 Adjustment  ................[ Auto ]
    
    tRD 2rd (Different Rank)  ................[ Auto ]
    tWR 2wr (Different Rank)  ................[ Auto ]
    tWR 2rd (Different Rank)  ................[ Auto ]
    tRD 2wr (Same/Difft Rank) ................[ Auto ]
    
    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]
    
    ******Channel A Driving Settings******
    
    Drive Strength Profile..........................[ 800MHZ ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]
    
    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]
    
    ******Channel B Timing Settings******
    
    Static tRead Value  ...............[ 9 ]
    tRD Phase0 Adjustment  ................[ Auto ]
    tRD Phase1 Adjustment  ................[ Auto ]
    tRD Phase2 Adjustment  ................[ Auto ]
    tRD Phase3 Adjustment  ................[ Auto ]
    
    tRD 2rd (Different Rank)  ................[ Auto ]
    tWR 2wr (Different Rank)  ................[ Auto ]
    tWR 2rd (Different Rank)  ................[ Auto ]
    tRD 2wr (Same/Difft Rank)................[ Auto ]
    
    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]
    
    ******Channel B Driving Settings******
    
    Drive Strength Profile..........................[800MHZ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]
    
    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]
    
    ******Motherboard Voltage Control******
    
    Load-Line Calibration...........................[ Enabled ]
    CPU Vcore [ 1.21250 ]...................[ 1.28125V ]
    CPU Termination [ 1.20 ]...................[ 1.240V ]
    CPU PLL [ 1.50 ]...................[ 1.590V ]
    CPU Reference [ 0.760 ]...................[ 0.785V ]
    
    MCH Core [ 1.100 ]...................[ 1.22V]
    MCH Reference [ 0.760 ]...................[ 0.825V ]
    MCH/DRAM Reference [ 0.900 ]...................[0.9V ]
    ICH I/O [ 1.500 ]...................[ 1.57V ]
    ICH Core [ 1.100 ]...................[ 1.2V]
    
    DRAM Voltage [ 1.800 ]...................[ 2.1V]
    DRAM Termination [ 0.900 ]...................[0.9V]
    Channel A Ref [ 0.900 ]...................[ 0.9V]
    Channel B Ref [ 0.900 ]...................[0.9V]
    ==================
    GA-EP45-UD3P & Q9550 @ 3.8Ghz
    4GB DDR2 OCZ
    EL Platinum XTC Dual Channel
    620W CORSAIR CMPSU-620HX
    Sapphire Radeon HD4870 toxic 512MB
    Creative X-Fi Titanium 7.1 PCI-E‎
    win7 x64

  2. #32
    Join Date
    Dec 2008
    Posts
    53

    Default Re: ep45-ud3p few questions

    so what now ? i left this testing issue aside for a day ... now in this day with system on 3.8GHZ ... i manage to play heavy games .. like crysis , gta4 , cod5 and others... everything seems to be going o.k... no crashes or freezes... but still i guess when ill run prime95 it would freeze/crash the system after 7-8 hours... i beginning to think that the problem is not my O.C being unstable .. instead i think maybe it's my sound card device or driver... cause it sitting on PCI-E , so he might be trobuled by this O.C stuff..

    is it possible ?
    or it's not the problem ? in that case ...should i stay as is or try tweaking and running prime95 once again ?
    ==================
    GA-EP45-UD3P & Q9550 @ 3.8Ghz
    4GB DDR2 OCZ
    EL Platinum XTC Dual Channel
    620W CORSAIR CMPSU-620HX
    Sapphire Radeon HD4870 toxic 512MB
    Creative X-Fi Titanium 7.1 PCI-E‎
    win7 x64

Page 4 of 4 FirstFirst ... 234

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •