Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 30

Thread: A Novice need help for overclocking X48-DS5 with E8400




  1. #11
    Join Date
    Jan 2009
    Posts
    31

    Default Re: A Novice need help for overclocking X48-DS5 with E8400

    I just tried orthos and prime95 again and it seems my system is still on stable but the temp change from previous temp that I posted.The both of cores' temp raise to 53C when on stress.While on idle,core#0 is at 36-39C and core#1 is at 39C.
    Edit:Run OCCT for 2hrs and only 1hrs left and system still stable with 56C on stress.
    Last edited by anbu84; 01-06-2009 at 10:51 AM.

  2. #12
    Join Date
    Jan 2009
    Posts
    31

    Default Re: A Novice need help for overclocking X48-DS5 with E8400

    Can anyone tell me why my vcore1 is 1.28v while my vcore2 is 2.22v?do they have to be same voltage or do they have to be different?
    Edit:nvm..forget what I ask..it seems vcore2 is RAM voltage not cpu voltage.
    Last edited by anbu84; 01-06-2009 at 12:05 PM.

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: A Novice need help for overclocking X48-DS5 with E8400

    The program you are using is reading the voltages wrong, use something else like everest

    If you are using 2.2V on your ram I advise you add a fan directly over it as soon as you can or lower the voltage

    Yea, you will need +0.2-0.3 MCH voltage

    Try running your ram at only 2.1V (+0.3) 2.2V is just the max you are allowed under warranty not what is needed to run the ram

    C1E and EIST leave disabled or your stable overclock will not be stable anymore

  4. #14
    Join Date
    Jan 2009
    Posts
    31

    Default Re: A Novice need help for overclocking X48-DS5 with E8400

    I will change my RAM voltage to 2.1v,but do I need to add fan directly to my RAM while I put my ram voltage on 2.1v?Oh,I forgot to mention that I run real temp while I run OCCT and orthos.my real temp showed different temp with OCCT and orthos.real temp showed my cpu's temp is at 51C while on stress and vcore#0 is at 30C and vcore#1 is at 34C while on idle.Which one I should believe?so,I just run everest but I can't find my cpu's temp.Where I can find my cpu's temp?and then when I installed the program,the program tried to install unknown driver that require all my hardware's driver get the signature something.
    C1E and EIST leave disabled or your stable overclock will not be stable anymore
    yeah,I noticed that when i tried to enabled both of them,my screen freeze so I put them disabled.
    Last edited by anbu84; 01-07-2009 at 03:06 AM.

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: A Novice need help for overclocking X48-DS5 with E8400

    No, you dont need a fan at 2.1V, and of course you may not even need the full 2.1V, try 2.0-2.05 as well if you can

    CPU Temp and Core Temps are very different. RealTemp shows you Core Temps, and 30/34 Idle and 50's Load is normal so you are fine

    In Everest you find CPU, and Core Temps in The computer then sensor section

  6. #16
    Join Date
    Jan 2009
    Posts
    31

    Default Re: A Novice need help for overclocking X48-DS5 with E8400

    how bout OCCT and orthos?do they show CPU temp or core temp?but why OCCT and orthos show different temp with real temp.how bout my BIOS settings?I still don't know if my BIOS setting set correctly.
    Last edited by anbu84; 01-07-2009 at 09:14 AM.

  7. #17
    Join Date
    Jan 2009
    Posts
    31

    Default Re: A Novice need help for overclocking X48-DS5 with E8400

    mmmm....my sensor in everest doesn't show anything.just plain white.is there anything wrong?

  8. #18
    Join Date
    Jan 2009
    Posts
    31

    Default Re: A Novice need help for overclocking X48-DS5 with E8400

    mmm...i tried 2.1v for my RAM and +0.2V on MCH,but when I run prime95,my windows crash...do you know what's the problem?and then I want to ask,when I see my RAM,there is sticker said that my RAM timing is 5-5-5@2.2v?is that mean I have to put 2.2v on my RAM?
    Edit:it seems the MCH that make my windows crash coz when I change back to +1.0V,my windows didn't crash.What should I do in order to fix it?
    Last edited by anbu84; 01-07-2009 at 01:09 PM.

  9. #19
    Join Date
    Jan 2009
    Posts
    31

    Default Re: A Novice need help for overclocking X48-DS5 with E8400

    Ok,so I tried 2.05V for my RAM and everything seems stable.However I still can't do anything with the MCH.I tried +0.2V for my MCH,it always crash my windows.Is there anyone know what is the problem?

  10. #20
    Join Date
    Jan 2009
    Posts
    31

    Default Re: A Novice need help for overclocking X48-DS5 with E8400

    I need someone to help me......please

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •