Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 9 of 9

Thread: Gigabyte+Mushkin




  1. #1
    Join Date
    Jan 2009
    Posts
    6

    Question Gigabyte+Mushkin

    Hi folks. Could sure use some help here. I'm in the process of building a new computer. Here's my setup:

    Gigabyte GA-EP45-DS4
    Intel Q6600
    Mushkin XP 2*2GB Dual Kit DDR2 1066Mhz
    Sapphire ATI HD4830

    System is working fine but all parts are default, no-oc.
    And I want to...
    Q6600 @3,2Ghz (is it dangerous with stock fan?)
    Mushkin XP @1066Mhz&5.5.5.15 (if possible. running at 5.7.7.24 now)

    What is the best bios settings for these specs? Any help is appreciated.

    And... Sory for my English.
    Piece
    Last edited by chupa; 01-06-2009 at 03:26 AM.

  2. #2
    Join Date
    Jan 2009
    Posts
    6

    Default Re: Gigabyte+Mushkin

    Any idea?

  3. #3
    Join Date
    Jan 2009
    Posts
    6

    Default Re: Gigabyte+Mushkin


  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte+Mushkin

    Not sure about 3.2 with a stock fan, might be pretty hot!

    What Mushkin Model # do you have?

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................:3.208


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 401Mhz
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.66D
    Memory Frequency (Mhz) ..............: 1066Mhz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15

    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-5
    tWR............................................4-6
    tRFC...........................................52-62
    tRTP...........................................3-5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................800/1066/1200 (Test/Bench all Three last, set 1066 now)

    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.35-1.46 (All up to your chip)

    CPU Termination…..... 1.200V*.......: <<< 1.25-1.45
    CPU PLL…………………....1.500V*.......: << 1.5-1.58

    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.2-1.3 (1.22-1.26 likely good)
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.5-1.6
    ICH Core…………...……1.100V............: <<< 1.1x-1.2

    DRAM
    DRAM Voltage ……....1.800V............: 2.0-2.1
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    Last edited by Lsdmeasap; 01-06-2009 at 07:35 PM.

  5. #5
    Join Date
    Jan 2009
    Posts
    6

    Default Re: Gigabyte+Mushkin

    Thanks for reply.

    Mushkin XP 2*2 DDR2 1066 996599

  6. #6
    Join Date
    Jan 2009
    Posts
    6

    Default Re: Gigabyte+Mushkin

    tRFC...........................................52-62
    What does it mean? (52 or 62) or (...56,57,58...) wich one?
    and
    6/7-10 333/B MCH - 8/9-12 400/D MCH
    i can't understand that...

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte+Mushkin

    Post edited above per your ram
    Quote Originally Posted by chupa View Post
    tRFC...........................................52-62
    What does it mean? (52 or 62) or (...56,57,58...) wich one?
    and
    6/7-10 333/B MCH - 8/9-12 400/D MCH
    i can't understand that...
    That means just as I wrote it, all the advanced timings are ranges, start with the higher numbers and work your way down one at a time testing with Memtest86+ as you go >>>
    Memtest86+

    6/7-10 333/B MCH - 8/9-12 400/D MCH

    ^^ That means if you are using a Memory Multi with a B on it use 6-10, if you are using one with D on it use 8-12. Starting with the higher values of course. Do this setting first, before you start lowering your advanced timings

  8. #8
    Join Date
    Jan 2009
    Posts
    6

    Default Re: Gigabyte+Mushkin

    Quote Originally Posted by Lsdmeasap View Post
    Post edited above per your ram


    That means just as I wrote it, all the advanced timings are ranges, start with the higher numbers and work your way down one at a time testing with Memtest86+ as you go >>>
    Memtest86+

    6/7-10 333/B MCH - 8/9-12 400/D MCH

    ^^ That means if you are using a Memory Multi with a B on it use 6-10, if you are using one with D on it use 8-12. Starting with the higher values of course. Do this setting first, before you start lowering your advanced timings
    You are my hero, thank you very much. I will try this settings at tonight.

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •