Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: GA-EX58-UD3R Gigabyte Logo Screen Not Appearing




  1. #1
    Join Date
    Jan 2009
    Posts
    6

    Question GA-EX58-UD3R Gigabyte Logo Screen Not Appearing

    I finally got a chance to put together the computer I bought over Christmas. It's been a while since I've assembled one, so please bear with me. Anyway, I have an Core i7 920 with 6GB OCZ 1600Mhz on a Gigabyte GA-EX58-UD3R. An LG DVD and WD Velociraptor 300GB are hooked up to the Intel SATA ports (0 and 3). When I enable AHCI, the Gigabyte Logo Screen no longer appears. Instead, I get the "AHCI searching for devices" (which takes a long time, IMHO), then directly to the post-POST screen where it shows all the devices/interrupts and attempts to boot. I can only get back to the BIOS if I keep hitting "Del" during the entire AHCI process, and Tab/F9/etc for all the other bootup options (i.e. QFlash and Express Recovery) don't seem to work. I do have "Display Logo at startup" enabled.

    I'm on the F1 BIOS (and other than this, I haven't experienced any problems yet, in terms of stability of DDR compatibility, so I don't want to upgrade just yet). Is this a bug, or working as designed?

    Thanks!

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EX58-UD3R Gigabyte Logo Screen Not Appearing

    As designed, although you should see this as a "Boot Thru Process" (Images I took for another user asking similar) >>>
    http://forums.tweaktown.com/f69/ga-e...10/#post271383

    With the Logo showing. Hitting any of your Del, End, F12, ect keys at bootup will get you to the BIOS, you do not need to Keep pressing them thru the AHCI, IRQ screens at all

    I would also plug your DVD Drive into the last port on the Intel controller. And if I was you I would for sure update from the F1 BIOS. Please do not use @BIOS!!! Here is a Qflash Guide I wrote Please do read it so you know what to expect and how to go about loading optimized and what needs to be done afterwords >>>
    http://forums.tweaktown.com/f69/bios...h-guide-27576/

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •