Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: EP45-UD3P and E5200 Bios Settings




  1. #1
    Join Date
    Jan 2009
    Posts
    8

    Default EP45-UD3P and E5200 Bios Settings

    Anyone out there running a e5200 on EP45-UD3P (or similar gigabyte board)? I'm looking for some good bios settings for a 3.5GHZ+ OC and want to see what everyone else is running. If you get a chance, can you post them here for reference? Thanks

  2. #2

    Default Re: EP45-UD3P and E5200 Bios Settings

    I am also interested in this question as I just built the same mobo/cpu combo and was about to post the same question. The bios settings available are much different than the other (slightly older) Gigabyte board in my other rig.

  3. #3
    Join Date
    Jan 2009
    Posts
    8

    Default Re: EP45-UD3P and E5200 Bios Settings

    suggestions?

  4. #4

    Default Re: EP45-UD3P and E5200 Bios Settings

    Quote Originally Posted by Alkora View Post
    suggestions?
    try google "E5200 OC GA-EP45-UD3P" or similar out there.

    pg
    GA-EP45-UD3R REV 1.1 BIOS F11 (stay away F10F)
    New Intel Pentium E6500 9x500 FSB=4.5 GHz on air
    G
    .SKILL PI BLK 2x2GB DDR2 800 1.8-1.9v CL4 @5.5.5.15 500 MHZ
    MSI GTX 260 OC 620/1080/1296 (192 SP)
    PSU BFG TECH GS-550W (DUAL+12V RAILS 18A EACH.)
    Windows 7 64bit build 7600



  5. #5
    Join Date
    Jan 2009
    Posts
    8

    Default Re: EP45-UD3P and E5200 Bios Settings

    Did a search already, nothing out there... Oh well, back to the basics of testing.

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P and E5200 Bios Settings

    Please post me a link to your ram and I can get you some settings for sure!

    Sorry for the late reply, I have been really backed up here this week

  7. #7
    Join Date
    Jan 2009
    Posts
    8

    Default Re: EP45-UD3P and E5200 Bios Settings

    Thanks- Here is the link to my ram
    Newegg.com - Crucial Ballistix 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Desktop Memory

    Here is a link to my current CPU-Z. Processor:
    http://alkora.veritablequandary.info/processor.JPG
    Ram:
    http://alkora.veritablequandary.info/ram.JPG

    I had my ram at a 5-5-5-18 timing when trying to get past 3.25 but for some reason I can't quite get past it.... I had my voltage higher (went as high as 1.44 but only one of the cores really worked at that voltage). I've seen lots of people get stable OCs on these chips at the 3.6-3.8 range... And i don't think its my ram thats holding me back. My cooler is adequate too. I think, AC Freezer 7 Pro.

    Thanks for your advice!
    Last edited by Alkora; 01-11-2009 at 03:28 AM.

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P and E5200 Bios Settings

    Here ya go, this should be a good optimal range for you to start with >>>

    I could not view your CPU-z images, but not so important anyway. Here is some 3.5 settings for you to try. Just put Vcore high enough to for sure boot you can lower it later. Not sure what that CPU can do really as not many use it

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 10
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3.50
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 350Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.40B 
    Memory Frequency (Mhz) ..............: 840Mhz
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-5
    tWR............................................4-6
    tRFC...........................................52-62
    tRTP...........................................3-5
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................1066
    
    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: All up to your chip and board, maybe 1.36 actual would be needed.  When you said 1.44 did you mean setting in the BIOS or actual?
    
    CPU Termination…..... 1.200V*.......: <<< 1.24-1.38
    CPU PLL…………………....1.500V*.......: << 1.5-1.6
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.22-1.24 should be good
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 2.0
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  9. #9
    Join Date
    Jan 2009
    Posts
    8

    Default Re: EP45-UD3P and E5200 Bios Settings

    Thanks. That was 100% stable at 3.5ghz. 2 hours occt and 8 hours prime. Gotta test a little bit more to get past 3.5, next attempt is to get to 3.75-85 range. I haven't be able to yet, but I am trying.

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P and E5200 Bios Settings

    Nice to hear! Glad to see you take on some initiative and think ahead!

    If you do need some more help with a higher speed (or even that one) please post back the exact settings you are using that are failing for you and I will advise

    Good luck tweaking!

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •