Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 8 of 8

Thread: EP45-DS3R can not shutdown




  1. #1
    Join Date
    Jan 2009
    Posts
    4

    Post EP45-DS3R can not shutdown

    I m using EP45-DS3R with E8400 with 3 x 1Gb kingston windows vista ultimate 32bits it s working fine, the problem is when I try to shutdown the pc , it shutdowns and reboots. when I did that from windows or manualy( because even if I hold power botton during bios start up it reboot)..it never shutdown by it self. I have to turn off the power. I tried to resolve the problem, by , changing PSU, the RAM , I flash the bios with F7, F9, F10 , and nothing. -EP45-DS3R Rev1.0 F10 -CPU E8400 C0 -3 x DDR2-SDRAM PC2-5300(333 mhz) no overcloking really I need help. any ideas ? thanks guys.
    Last edited by yssf; 01-10-2009 at 07:26 AM.

  2. #2
    Join Date
    Dec 2008
    Posts
    1

    Post Re: EP45-DS3R can not shutdown

    perhapes it s defect you should change it.

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-DS3R can not shutdown

    Is this matching ram? Can you give me a link to it?

    Put Performance Enhance on standard in the MIT Section of the BIOS and be sure to set your ram voltage.

    I need the above info before I can best advise you though, but if you have not set those things already please do and see if it helps

  4. #4
    Join Date
    Jan 2009
    Posts
    4

    Default Re: EP45-DS3R can not shutdown

    I reset the MIT. and my voltage is 1.8 for the ram and it s kingston kvr667d2n 5-5-5-15 , it s basic ram, no nothing changed , it driving me crazy, do need more details.. and thanks for your help

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-DS3R can not shutdown

    Yes, please give us your full settings and we will advise back. >>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  6. #6
    Join Date
    Jan 2009
    Posts
    4

    Default Re: EP45-DS3R can not shutdown

    Quote Originally Posted by Lsdmeasap View Post
    Yes, please give us your full settings and we will advise back. >>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto 
    CPU Clock Ratio ..........................: 9x 
    Fine CPU Clock Ratio.....................:.+0.0
    CPU Frequency ...........................: 3.00 Ghz (333x9)
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled] 
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:auto
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800mV
    PCI Express Clock Drive.................: <<< 900mV
    CPU Clock Skew (ps)....................: <<< 0ps
    MCH Clock Skew (ps)...................: <<< 0ps
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: I do not have this lie
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: auto 
    Memory Frequency (Mhz) ..............:667 
    DRAM Timing Selectable ................: [auto]
    
    Standard Timing Control
    CAS Latency Time........................5 auto
    tRCD .........................................5 auto
    tRP'...........................................5 auto
    tRAS..........................................15 auto
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go===>> I can t change anything in the menu
    
    Advanced Timing Control
    tRRD...........................................3 auto
    tWTR..........................................3 auto
    tWR............................................5 auto
    tRFC...........................................36 auto
    tRTP...........................................3 auto
    Command Rate (CMD) ....................:0 auto
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:9 auto
     tRD Phase0 Adjustment...................:0 Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:0 Auto
     tRD Phase2 Adjustment .................: 0 Auto
     tRD Phase3 Adjustment..................: 0 Auto
    Trd2rd(Different Rank)....................:6 Auto 
    Twr2wr(Different Rank)...................:6 Auto 
    Twr2rd(Different Rank)...................:5 Auto 
    Trd2wr(Same/Diff Rank)..................:8 Auto 
    Dimm1 Clock Skew Control...............:Auto 
    Dimm2 Clock Skew Control...............:Auto 
    
    Channel B
    Static tRead Value.........................:9 auto  tRD Phase0 Adjustment...................:0 Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:0 Auto
     tRD Phase2 Adjustment .................:0 Auto
     tRD Phase3 Adjustment..................:0Auto
    Trd2rd(Different Rank)....................:6 Auto 
    Twr2wr(Different Rank)...................:6Auto 
    Twr2rd(Different Rank)...................:5 Auto 
    Trd2wr(Same/Diff Rank)..................:8Auto 
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    
    Motherboard Voltage Control
    Voltage Type.………... 
    CPU
    CPU Vcore….………1.22500V auto....................:auto
    CPU Termination…..... 1.200V*.......: auto
    CPU PLL…………………....1.500V*.......: auto
    
    CPU Referen.…………....0.760V*.......:auto 
    
    I do not have this line ref2 : CPU Reference2………,,0.0V*.......:auto<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........:auto << 
    MCH Reference….…….0.760V...........;auto
    MCH/DRAM Ref.…......0.900V...........: auto<<< Leave
    ICH I/O……………….....1.500V............: auto
     I do not have this line: ICH Core…………...……00V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 1.800V
    DRAM Termination .…0.900V............: auto
    Channel A Reference 0.900V............: auto
    Channel B Reference 0.900V............: auto
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    thanks man
    Last edited by yssf; 01-13-2009 at 11:24 PM.

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-DS3R can not shutdown

    That is not suggested settings at all man, just a template for you to give me your settings back with that you are having issues with. You have to fill it in with your settings you are using and I will advise back

  8. #8
    Join Date
    Jan 2009
    Posts
    4

    Default Re: EP45-DS3R can not shutdown

    Quote Originally Posted by Lsdmeasap View Post
    That is not suggested settings at all man, just a template for you to give me your settings back with that you are having issues with. You have to fill it in with your settings you are using and I will advise back
    really I it s how it is , I don t overclock, I m using like it cames, I did not make any change in the bios from the first day . the mean time is auto,

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •