Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: GA-EP45-UD3P difficulty




  1. #1

    Default GA-EP45-UD3P difficulty

    Every time I start my PC after it's been unplugged it has trouble starting.

    Specifically it will keep a black screen and not POST until it has power cycled a few times. Sometimes it will get through the first screen, memory and IDE controllers and then hang. There are times I can get into BIOS but won't be able to access M.I.T. or it will lock up.

    I will occasionally get a blue screen during Windows loading, but they never seem to lead to anything concrete and don't repeat or show up once the system is running even after hours of gaming.

    Restarts from Windows does not reproduce this problem.

    Any help would be appreciated as im not quite sure where to start.

    system specs:
    GA-EP45-UD3P f5 bios optimized defaults loaded
    q9550 stock
    xigmatek hdt-s1283 w/bracket
    sapphire 4850 x2
    640g WD HD
    Vista home 64bit sp1
    gskill 2x2g ddr2 1066
    Antec NeoPower 650 650W ATX12V / EPS12V
    GIGABYTE GN-WP01GS IEEE 802.11b/g PCI Wireless Adapter
    antec 900 case

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-UD3P difficulty

    What settings are you using, and please link me to your ram >>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: 
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 
    PCI Express Clock Drive.................: <<< 
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  3. #3

    Default Re: GA-EP45-UD3P difficulty

    RAM DDR2

    BIOS MIT settings were all optimized defaults/auto. I can provide the details if necessary, but i've been playing around with the settings since my original post.

    I've been trying to monkey around with manually setting the timings and upping the voltage to the RAM's specifications. I was only able to run chkdsk and vista memory test and havent had time to continue playing with it to see if the changes had any effect on cold start up.

  4. #4

    Default Re: GA-EP45-UD3P difficulty

    the changes made it much harder to get the system to load...more power cycles without any video output and partial POST screens, unable to del into BIOS and an error when i was able to get into BIOS about the system failing to load.

    BIOS with the manual input of timings and voltage

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster .................: [Auto]
    CPU Clock Ratio .........................: [8x]
    Fine CPU Clock Ratio.....................: [+0.5]
    CPU Frequency ...........................: 2.83GHZ (333x8.5)

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control...................: [Disabled]
    CPU Host Frequency (Mhz) ................: 333
    PCI Express Frequency (Mhz) .............: [Auto]
    C.I.A.2 .................................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive..........................: [800mV]
    PCI Express Clock Drive..................: [900mV]
    CPU Clock Skew (ps)......................: [ 0ps]
    MCH Clock Skew (ps)......................: [ 0ps]

    DRAM Performance Control
    Performance Enhance......................: [Turbo]
    Extreme Memory Profile (X.M.P.)..........: [Auto]
    (G)MCH Frequency Latch...................: [Auto]
    System Memory Multiplier ................: [3.20B]
    Memory Frequency (Mhz) .............: 1066 1066
    DRAM Timing Selectable ..................: [Manual]
    Standard Timing Control
    CAS Latency Time....................... 5 [5]
    tRCD .................................. 5 [5]
    tRP'................................... 5 [5]
    tRAS................................... 15 [15]

    Advanced Timing Control
    tRRD................................... 4 [Auto]
    tWTR................................... 4 [Auto]
    tWR.................................... 13 [Auto]
    tRFC................................... 68 [Auto]
    tRTP................................... 4 [Auto]
    Command Rate (CMD) .................... 0 [Auto]
    Driving Strength Profiles
    Driving Strength ......................... [Auto]
    Channel A
    Static tRead Value..................... 8 [Auto]
    tRD Phase0 Adjustment.................. 0 [Auto]
    tRD Phase1 Adjustment.................. 0 [Auto]
    tRD Phase2 Adjustment ................. 0 [Auto]
    tRD Phase3 Adjustment.................. 0 [Auto]
    Trd2rd(Different Rank)................. 8 [Auto]
    Twr2wr(Different Rank)................. 8 [Auto]
    Twr2rd(Different Rank)................. 7 [Auto]
    Trd2wr(Same/Diff Rank)................. 9 [Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training..................... [Auto] *added
    Channel B
    Static tRead Value..................... 8 [Auto]
    tRD Phase0 Adjustment.................. 0 [Auto]
    tRD Phase1 Adjustment.................. 0 [Auto]
    tRD Phase2 Adjustment ................. 0 [Auto]
    tRD Phase3 Adjustment.................. 0 [Auto]
    Trd2rd(Different Rank)................. 8 [Auto]
    Twr2wr(Different Rank)................. 8 [Auto]
    Twr2rd(Different Rank)................. 7 [Auto]
    Trd2wr(Same/Diff Rank)................. 9 [Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training..................... [Auto] *added
    Motherboard Voltage Control
    Voltage Type Normal Current
    CPU
    Load-Line Calibration..................... [Disabled] *added
    CPU Vcore........................ 1.25000V [Auto]
    CPU Termination.................. 1.200V [Auto]
    CPU PLL.......................... 1.500V [Auto]
    CPU Referen...................... 0.760V [Auto]
    CPU Reference2................... ?do not have this
    MCH/ICH
    MCH Core......................... 1.100V [Auto]
    MCH Reference.................... 0.760V [Auto]
    MCH/DRAM Ref..................... 0.900V [Auto]
    ICH I/O.......................... 1.500V [Auto]
    ICH Core......................... 1.100V [Auto]
    DRAM
    DRAM Voltage..................... 1.800V [2.020V]
    DRAM Termination................. 0.900V [Auto]
    Channel A Reference ............. 0.900V [Auto]
    Channel B Reference ............. 0.900V [Auto]
    Advanced Settings
    Limit CPUID Max. to 3..................... [Disabled]
    No-Execute Memory Protect................. [Enabled]
    CPU Enhanced Halt (C1E)................... [Enabled]
    C2/C2E State Support...................... ?do not have this
    x C4/C4E State Support.................... ?do not have this
    CPU Thermal Monitor 2(TM2) ............... [Enabled]
    CPU EIST Function......................... [Enabled]
    Virtualization Technology................. [Enabled] default, should this be
    disabled?
    Integrated Peripherals
    Legacy USB Storage Detect ................ [Enabled]

    I'm comparing these settings to where they are when I load the optimized defaults and everything is the same except [Auto] is in place of the user selected options.

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-UD3P difficulty

    See if this helps any >>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster .................: [Auto]
    CPU Clock Ratio .........................: [8x]
    Fine CPU Clock Ratio.....................: [+0.5]
    CPU Frequency ...........................: 2.83GHZ (333x8.5)

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control...................: [Disabled]
    CPU Host Frequency (Mhz) ................: 333
    PCI Express Frequency (Mhz) .............: [100]
    C.I.A.2 .................................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive..........................: [800mV]
    PCI Express Clock Drive..................: [900mV]
    CPU Clock Skew (ps)......................: [ 0ps]
    MCH Clock Skew (ps)......................: [ 0ps]

    DRAM Performance Control
    Performance Enhance......................: [Turbo] Standard
    Extreme Memory Profile (X.M.P.)..........: [Auto] << Disabled
    (G)MCH Frequency Latch...................: [Auto]
    System Memory Multiplier ................: [3.20B]
    Memory Frequency (Mhz) .............: 1066 1066
    DRAM Timing Selectable ..................: [Manual]

    Standard Timing Control
    CAS Latency Time....................... 5 [5]
    tRCD .................................. 5 [5]
    tRP'................................... 5 [5]
    tRAS................................... 15 [15]

    Advanced Timing Control
    tRRD................................... 4 [Auto] 3-4
    tWTR................................... 4 [Auto] 3-6
    tWR.................................... 13 [Auto] 4-6
    tRFC................................... 68 [Auto] 52-62
    tRTP................................... 4 [Auto] 3-5
    Command Rate (CMD) .................... 0 [Auto]2

    Driving Strength Profiles
    Driving Strength ......................... [Auto] Set 1066

    Channel A
    Static tRead Value..................... Set 9 for now
    tRD Phase0 Adjustment.................. 0 [Auto]
    tRD Phase1 Adjustment.................. 0 [Auto]
    tRD Phase2 Adjustment ................. 0 [Auto]
    tRD Phase3 Adjustment.................. 0 [Auto]
    Trd2rd(Different Rank)................. 8 [Auto]
    Twr2wr(Different Rank)................. 8 [Auto]
    Twr2rd(Different Rank)................. 7 [Auto]
    Trd2wr(Same/Diff Rank)................. 9 [Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training..................... [Auto] *added

    Channel B
    Static tRead Value..................... Set 9 for now
    tRD Phase0 Adjustment.................. 0 [Auto]
    tRD Phase1 Adjustment.................. 0 [Auto]
    tRD Phase2 Adjustment ................. 0 [Auto]
    tRD Phase3 Adjustment.................. 0 [Auto]
    Trd2rd(Different Rank)................. 8 [Auto]
    Twr2wr(Different Rank)................. 8 [Auto]
    Twr2rd(Different Rank)................. 7 [Auto]
    Trd2wr(Same/Diff Rank)................. 9 [Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training..................... [Auto] *added

    Motherboard Voltage Control
    Voltage Type Normal Current
    CPU
    Load-Line Calibration..................... [Disabled] *added
    CPU Vcore........................ 1.25000V [Auto] Fine if not overclocking

    CPU Termination.................. 1.200V [Auto] Auto is fine if not overclocking, if you are DO NOT use auto, set 1.2-1.36

    CPU PLL.......................... 1.500V [Auto] Set to 1.45 or 1.5 if not overclocking, if you are overclocking use 1.5-1.6 do not use auto

    CPU Referen...................... 0.760V [Auto]

    MCH/ICH
    MCH Core......................... 1.100V [Auto] 1.2-1.3 (1.22-1.24 likely good)
    MCH Reference.................... 0.760V [Auto]
    MCH/DRAM Ref..................... 0.900V [Auto]
    ICH I/O.......................... 1.500V [Auto] 1.55-1.6
    ICH Core......................... 1.100V [Auto] 1.14-1.2
    DRAM
    DRAM Voltage..................... 1.800V [2.020V] 2.0-2.1V
    DRAM Termination................. 0.900V [Auto]
    Channel A Reference ............. 0.900V [Auto]
    Channel B Reference ............. 0.900V [Auto]

    Advanced Settings
    Limit CPUID Max. to 3..................... [Disabled]
    No-Execute Memory Protect................. [Enabled]
    CPU Enhanced Halt (C1E)................... [Enabled]<< Disable for overclocking
    CPU Thermal Monitor 2(TM2) ............... [Enabled]
    CPU EIST Function......................... [Enabled] << Disable for overclocking
    Virtualization Technology................. [Enabled] default, should this be
    disabled? If you do not use Vmware or Virtual Machines yes disable this

  6. #6

    Default Re: GA-EP45-UD3P difficulty

    took your advice. used numbers in bold where a range was given.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster .................: [Auto]
    CPU Clock Ratio .........................: [8x]
    Fine CPU Clock Ratio.....................: [+0.5]
    CPU Frequency ...........................: 2.83GHZ (333x8.5)

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control...................: [Disabled]
    CPU Host Frequency (Mhz) ................: 333
    PCI Express Frequency (Mhz) .............: [100]
    C.I.A.2 .................................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive..........................: [800mV]
    PCI Express Clock Drive..................: [900mV]
    CPU Clock Skew (ps)......................: [ 0ps]
    MCH Clock Skew (ps)......................: [ 0ps]

    DRAM Performance Control
    Performance Enhance......................: [Turbo] Standard
    Extreme Memory Profile (X.M.P.)..........: [Auto] << Disabled
    (G)MCH Frequency Latch...................: [Auto]
    System Memory Multiplier ................: [3.20B]
    Memory Frequency (Mhz) .............: 1066 1066
    DRAM Timing Selectable ..................: [Manual]

    Standard Timing Control
    CAS Latency Time....................... 5 [5]
    tRCD .................................. 5 [5]
    tRP'................................... 5 [5]
    tRAS................................... 15 [15]

    Advanced Timing Control
    tRRD................................... 4 [Auto] 3-4 4
    tWTR................................... 4 [Auto] 3-6 4
    tWR.................................... 13 [Auto] 4-6 5
    tRFC................................... 68 [Auto] 52-62 58
    tRTP................................... 4 [Auto] 3-5 4
    Command Rate (CMD) .................... 0 [Auto]2

    Driving Strength Profiles
    Driving Strength ......................... [Auto] Set 1066

    Channel A
    Static tRead Value..................... Set 9 for now
    tRD Phase0 Adjustment.................. 0 [Auto]
    tRD Phase1 Adjustment.................. 0 [Auto]
    tRD Phase2 Adjustment ................. 0 [Auto]
    tRD Phase3 Adjustment.................. 0 [Auto]
    Trd2rd(Different Rank)................. 8 [Auto]
    Twr2wr(Different Rank)................. 8 [Auto]
    Twr2rd(Different Rank)................. 7 [Auto]
    Trd2wr(Same/Diff Rank)................. 9 [Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training..................... [Auto] *added

    Channel B
    Static tRead Value..................... Set 9 for now
    tRD Phase0 Adjustment.................. 0 [Auto]
    tRD Phase1 Adjustment.................. 0 [Auto]
    tRD Phase2 Adjustment ................. 0 [Auto]
    tRD Phase3 Adjustment.................. 0 [Auto]
    Trd2rd(Different Rank)................. 8 [Auto]
    Twr2wr(Different Rank)................. 8 [Auto]
    Twr2rd(Different Rank)................. 7 [Auto]
    Trd2wr(Same/Diff Rank)................. 9 [Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training..................... [Auto] *added

    Motherboard Voltage Control
    Voltage Type Normal Current
    CPU
    Load-Line Calibration..................... [Disabled] *added
    CPU Vcore........................ 1.25000V [Auto] Fine if not overclocking

    CPU Termination.................. 1.200V [Auto] Auto is fine if not overclocking, if you are DO NOT use auto, set 1.2-1.36

    CPU PLL.......................... 1.500V [Auto] Set to 1.45 or 1.5 if not overclocking, if you are overclocking use 1.5-1.6 do not use auto

    CPU Referen...................... 0.760V [Auto]

    MCH/ICH
    MCH Core......................... 1.100V [Auto] 1.2-1.3 (1.22-1.24 likely good)
    MCH Reference.................... 0.760V [Auto]
    MCH/DRAM Ref..................... 0.900V [Auto]
    ICH I/O.......................... 1.500V [Auto] 1.55-1.6 1.57
    ICH Core......................... 1.100V [Auto] 1.14-1.2
    DRAM
    DRAM Voltage..................... 1.800V [2.020V] 2.0-2.1V
    DRAM Termination................. 0.900V [Auto]
    Channel A Reference ............. 0.900V [Auto]
    Channel B Reference ............. 0.900V [Auto]

    Advanced Settings
    Limit CPUID Max. to 3..................... [Disabled]
    No-Execute Memory Protect................. [Enabled]
    CPU Enhanced Halt (C1E)................... [Enabled]<< Disable for overclocking
    CPU Thermal Monitor 2(TM2) ............... [Enabled]
    CPU EIST Function......................... [Enabled] << Disable for overclocking
    Virtualization Technology................. [Enabled] default, should this be
    disabled? If you do not use Vmware or Virtual Machines yes disable this



    saved these settings and allowed pc to reboot and get a quick, constant power cycle...ugh

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-UD3P difficulty

    See if these settings help any >>>

    CPU Termination.................. 1.22-1.24

    MCH/ICH
    MCH Core......................... 1.18-1.22 (Also try last 1.05)
    MCH Reference.................... 0.760V [Auto]
    MCH/DRAM Ref..................... 0.900V [Auto]
    ICH I/O.......................... 1.55
    ICH Core......................... 1.14

    DRAM Voltage..................... 2.1V

  8. #8

    Default Re: GA-EP45-UD3P difficulty

    I haven't gotten around to making the proposed changes just yet, but i thought it was worth mentioning that disabling virtualization technology prevents the machine from posting at all.

    any idea why that is?

  9. #9

    Default Re: GA-EP45-UD3P difficulty

    kept the settings the same but changed

    CPU Termination.................. 1.22-1.24

    MCH/ICH
    MCH Core......................... 1.18-1.22 (Also try last 1.05)
    MCH Reference.................... 0.760V [Auto]
    MCH/DRAM Ref..................... 0.900V [Auto]
    ICH I/O.......................... 1.55 left on auto, options go from 1.5 to 1.57
    ICH Core......................... 1.14 left on auto, options go from 1.1 to 1.2

    Static tRead Value................8

    Virtualization Technology................. [Enabled], wont post otherwise


    ive been trying to make changes slowly to see how each one effects performance and how it boots next time around. i thought it's worth mentioning that it shows 5,7,7,20 timings in MIT when i can get it to first load.

  10. #10

    Default Re: GA-EP45-UD3P difficulty

    MCH Core at 1.22 and it still needs a cycle or 2 to post after saving changes.

    at 1.18 it finally booted after reverting to the backup bios im guessing as i got the gigabyte graphic and the default MIT settings.

    at 1.05 it posted right away after saving changes, auto too.


    so considering all of my previous tinkering im currently at

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster .................: [Auto]
    CPU Clock Ratio ............................: [8x]
    Fine CPU Clock Ratio.......................: [+0.5]
    CPU Frequency .............................: 2.83GHZ (333x8.5)

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control......................: [Disabled]
    CPU Host Frequency (Mhz) ................: 333
    PCI Express Frequency (Mhz) .............:[Auto]
    C.I.A.2 ..........................................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive............................: [800mV]
    PCI Express Clock Drive..................: [900mV]
    CPU Clock Skew (ps).....................: [ 0ps]
    MCH Clock Skew (ps).....................: [ 0ps]

    DRAM Performance Control
    Performance Enhance........................: [Turbo] Standard
    Extreme Memory Profile (X.M.P.)..........: [Auto] Disabled
    (G)MCH Frequency Latch....................: [Auto]
    System Memory Multiplier ..................: [3.20B]
    Memory Frequency (Mhz) ...............: 1066 1066
    DRAM Timing Selectable ..................: [Manual]

    Standard Timing Control
    CAS Latency Time....................... 5 [5]
    tRCD ........................................ 7 [5]
    tRP'.......................................... 7 [5]
    tRAS....................................... 20 [15]

    Advanced Timing Control
    tRRD................................... 4 [Auto] 3-4 4
    tWTR................................... 4 [Auto] 3-6 4
    tWR.................................... 13 [Auto] 4-6 5
    tRFC................................... 68 [Auto] 52-62 58
    tRTP................................... 4 [Auto] 3-5 4
    Command Rate (CMD) .................... 0 [Auto]2

    Driving Strength Profiles
    Driving Strength ......................... [Auto] Set 1066

    Channel A
    Static tRead Value..................... 8
    tRD Phase0 Adjustment.................. 0 [Auto]
    tRD Phase1 Adjustment.................. 0 [Auto]
    tRD Phase2 Adjustment ................. 0 [Auto]
    tRD Phase3 Adjustment.................. 0 [Auto]
    Trd2rd(Different Rank)................. 8 [Auto]
    Twr2wr(Different Rank)................. 8 [Auto]
    Twr2rd(Different Rank)................. 7 [Auto]
    Trd2wr(Same/Diff Rank)................. 9 [Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training..................... [Auto] *added

    Channel B
    Static tRead Value..................... 8
    tRD Phase0 Adjustment.................. 0 [Auto]
    tRD Phase1 Adjustment.................. 0 [Auto]
    tRD Phase2 Adjustment ................. 0 [Auto]
    tRD Phase3 Adjustment.................. 0 [Auto]
    Trd2rd(Different Rank)................. 8 [Auto]
    Twr2wr(Different Rank)................. 8 [Auto]
    Twr2rd(Different Rank)................. 7 [Auto]
    Trd2wr(Same/Diff Rank)................. 9 [Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training..................... [Auto] *added

    Motherboard Voltage Control
    Voltage Type Normal Current
    CPU
    Load-Line Calibration..................... [Disabled]
    CPU Vcore........................ 1.25000V [Auto]
    CPU Termination.................. 1.200V [Auto] 1.22
    CPU PLL............................. 1.500V [Auto]
    CPU Referen........................ 0.760V [Auto]

    MCH/ICH
    MCH Core........................... 1.100V [Auto]
    MCH Reference.................... 0.760V [Auto]
    MCH/DRAM Ref..................... 0.900V [Auto]
    ICH I/O........................... 1.500V [Auto]
    ICH Core......................... 1.100V [Auto]
    DRAM
    DRAM Voltage..................... 1.800V [2.100V]
    DRAM Termination................. 0.900V [Auto]
    Channel A Reference ............. 0.900V [Auto]
    Channel B Reference ............. 0.900V [Auto]

    Advanced Settings
    Limit CPUID Max. to 3......................... [Disabled]
    No-Execute Memory Protect................ [Enabled]
    CPU Enhanced Halt (C1E).................... [Enabled
    CPU Thermal Monitor 2(TM2) ............... [Enabled]
    CPU EIST Function............................. [Enabled]
    Virtualization Technology..................... [Enabled]


    i unplugged the machine for 5 min or so and it posted right away, but im skeptical that it will after its been unplugged for longer. ill check again tomorrow night.

    any thoughts/feedback?
    Last edited by heavyengineering; 01-24-2009 at 12:35 PM.

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •