Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: Requesting E8400 & GA-EP45-UD3P bios template




  1. #1
    Join Date
    Jan 2009
    Posts
    18

    Default Requesting E8400 & GA-EP45-UD3P bios template

    Hi Lsdmeasap,
    May I get the optimal template for this system @ 4GHz?
    E8400 (E0 Stepping)
    GA-EP45-UD3P
    Xigmatek HDT-S1283
    Corsair Dominator 2x2GB PC2-8500
    OCZ 850W GameXStream
    If it matters: Sapphire 4870 512MB, X-Fi Fatal1ty, 74GB Raptor, and 1TB Black.

    In addition, can you let me know which settings I should change in that template to utilize 8GB of Corsair Dominator PC2-8500? I might be going to 8GB in the near future with these low ram prices.

    Thank you ,
    Trikat
    Processor: Intel i5-3570K (stock)
    Cooling: Stock intel CPU cooler
    Motherboard: ASUS Maximus V Gene
    Memory: Samsung 2x 8GB M379B5273DH0-YK0
    PSU: Corsair AX750 Gold
    Case: Lian Li PC-P50R
    Monitor: U2713HM
    Video Card: Sapphire 6950 2GB (Gigabyte 280X rev2 currently artifacting)
    Sound Card: Onboard
    OS: Windows 7 x64

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Requesting E8400 & GA-EP45-UD3P bios template

    Sure thing man, hee ya go. For 8GB you may need more MCH Voltage and to adjust tRFC and possibly some other timings >>>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 4.05


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 450Mhz
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00D (2.00B may work for you as well, it would be better but is harder to get stable often at high FSB) This is 900Mhz, you may also try 2.66D for 1066 but it may take some tweaking of MCH Voltage

    Memory Frequency (Mhz) ..............: 900Mhz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15/18

    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-5
    tWR............................................4-6
    tRFC...........................................52-62
    tRTP...........................................3-5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................800/1066 (Benchmark/Test both last, set 1066 now)

    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.25-1.36 Actual not bios settings (All up to your chip)

    CPU Termination…..... 1.200V*.......: <<< 1.2-1.36 (1.2-1.28 likely plenty)
    CPU PLL…………………....1.500V*.......: << 1.5-1.58

    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.2-1.3 (1.22-1.26 likely good)
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.5-1.6
    ICH Core…………...……1.100V............: <<< 1.1x-1.2

    DRAM
    DRAM Voltage ……....1.800V............: 2.0-2.1 (Check your ram sticker)
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  3. #3
    Join Date
    Jan 2009
    Posts
    18

    Default Re: Requesting E8400 & GA-EP45-UD3P bios template

    Thank you for the template.
    It might be some time before I get around to it due to college starting up again, but i'll work my way up to that speed eventually.
    I can't afford to mess up anything so I will be taking it slow.
    Plus i'm new to Intel chips and the plethora of bios options versus my old AMD nForce 4 board.
    I'll try to remember to update this thread with my experiences.
    Processor: Intel i5-3570K (stock)
    Cooling: Stock intel CPU cooler
    Motherboard: ASUS Maximus V Gene
    Memory: Samsung 2x 8GB M379B5273DH0-YK0
    PSU: Corsair AX750 Gold
    Case: Lian Li PC-P50R
    Monitor: U2713HM
    Video Card: Sapphire 6950 2GB (Gigabyte 280X rev2 currently artifacting)
    Sound Card: Onboard
    OS: Windows 7 x64

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Requesting E8400 & GA-EP45-UD3P bios template

    K, well good luck and keep studying!!

    Post back anytime if you need some help with things as you go

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •