Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: GA-EP35C-DS3R tweaking? (to Lsdmeasap)




  1. #1
    Join Date
    Jan 2009
    Posts
    3

    Default GA-EP35C-DS3R tweaking? (to Lsdmeasap)

    (This is mostly intended for Lsdmeasap who graciously offered to give advice, but anyone is welcome of course.)

    All right, I'm not sure how much of this is necessary, but this is what I have:

    MB: Gigabyte GA-EP35C-DS3R P35, s775 (BIOS v. F3)
    CPU: Q9450 CORE2 QUAD 2.66GHZ S775
    CPU Cooler: Scythe Ninja Copper "Limited Edition"
    RAM: Corsair TWIN3X2048-1333C9 G 2x1024MB (tot. 2048MB) DDR3 1333MHz 9-9-9-24
    Graphics: Gigabyte Geforce 9600GT 512MB Heatpipe
    HDD (Mirror RAID): 2 x Western Digital Caviar WD2500AAKS 250GB 16MB SATA2
    PSU: be quiet! Straight Power 550W ATX

    (Plus a DVD+-RW and a good ole 1.44 diskdrive.)

    Now, my question: I have just installed BIOS v. F3 and loaded the "optimized defaults". Is there anything else I should tweak in BIOS, or do the optimized defaults cover everything I need if I don't want to overclock or such?

    Thanks!
    -r1ffe

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP35C-DS3R tweaking? (to Lsdmeasap)

    Well you should put performance enahance on standard, set your ram voltage to the spec amount. As for the rest, auto should work... But it will for sure not be the best performance wise.

    If you would like some help with your settings please do let me know and I can help ya out. If you would like to set them all please fill this out with what you are using now, and link to your ram and I will advise back when I get in tonight >>>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________
    Static tRead Phase Adjust________ [Auto]
    
    CPU/PCIEX Clock Driving Control [800mV]
    CPU Clock Skew Control [normal]
    GMCH Clock Skew Control [Normal]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •