Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Unable to OC UD3P and Q6600




  1. #1
    Join Date
    Jan 2009
    Posts
    11

    Default Unable to OC UD3P and Q6600

    About a week ago, i built this computer and i used these settings. It computer rebooted a few times and then loaded and has been stable ever since. When i go into bios it had that red box error about CPU OC and voltage being incorrect so the settings may not be as they appear.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: auto or FAST
    CPU Clock Ratio ..........................: 9x
    CPU Frequency ...........................:2.40

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [enabled]
    CPU Host Frequency (Mhz) ............: 266Mhz
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mv
    PCI Express Clock Drive.................: 900mv
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)...................: 0ps

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 4.00A
    Memory Frequency (Mhz) ..............: 1066
    DRAM Timing Selectable ................: [auto]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15

    Use all highest values below until you get your CPU where you want it and stable, then slowly lower these one at a time testing as you go

    Advanced Timing Control
    tRRD...........................................5
    tWTR..........................................6
    tWR............................................8
    tRFC...........................................62
    tRTP...........................................5
    Command Rate (CMD) ....................:2

    Channel A
    Static tRead Value.........................:10
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:10
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    CPU
    Load-line Calibration Disabled
    CPU Vcore….……….........................:1.32500v
    CPU Termination…..... 1.200v.......: <<< 1.2
    CPU PLL…………………....1.500v.......: << 1.5

    CPU Referen.…………....0.760v.......: <<< auto


    MCH/ICH
    MCH Core…………….....1.100v...........: << 1.280
    MCH Reference….…….0.760...........; <<< auto
    MCH/DRAM Ref.…......0.900V...........: <<< auto
    ICH I/O……………….....1.500V............: <<< 1.50
    ICH Core…………...……1.100V............: <<< 1.20

    DRAM
    DRAM Voltage ……....1.000v............: 2.1
    DRAM Termination .…0.900V............: <<< auto
    Channel A Reference 0.900V............: <<< auto
    Channel B Reference 0.900V............: <<< auto

    All i want to do is OC it to 3.0, but i cant seem to figure out what i did wrong based on these values here for the stock 2.4.

  2. #2
    Join Date
    Jan 2009
    Posts
    11

    Default Re: Unable to OC UD3P and Q6600

    Anyone know?

  3. #3
    Join Date
    Jan 2009
    Posts
    11

    Default Re: Unable to OC UD3P and Q6600

    :\

  4. #4
    Join Date
    Jan 2009
    Posts
    11

    Default Re: Unable to OC UD3P and Q6600

    Still need help

  5. #5
    flyfisher is offline Member
    Join Date
    Dec 2008
    Location
    South Central PA
    Posts
    191

    Default Re: Unable to OC UD3P and Q6600

    You have given no information about the rest of your components. Memory? Power supply?

  6. #6
    Join Date
    Jan 2009
    Location
    Colorado, USA
    Posts
    88

    Default Re: Unable to OC UD3P and Q6600

    Goto user CP and enter your hardware into your signature so like flyfisher said, we know what your working with.
    __________________
    GA-P67A-UD4-B3(v1.1) - F4 BIOS
    Intel Core i5-2500K - Corsair H50 p/p
    Mushkin Blackline DDR3-1600 @ 9-9-9-24 1.35v
    OCZ Vertex 2 60GB 34nm SSD - Maxtor 320GB
    Gigabyte GTX 460 SuperOverclock 1GB
    Corsair TX650W PSU
    Windows 7 HP 64-bit - SP1
    Antec 300 Case - Maxed out fans

    "The files are IN the computer ... It's SO SIMPLE!"

  7. #7
    Join Date
    Jan 2009
    Posts
    11

    Default Re: Unable to OC UD3P and Q6600

    Gigabyte UD3P
    Intel Core 2 Quad Q6600 Kentsfield
    GSkill F2-8000CL5D-4GBPQ
    Corsair 750W PSU

    Tell me if you guys need additional information.

  8. #8
    Join Date
    Jan 2009
    Location
    Colorado, USA
    Posts
    88

    Default Re: Unable to OC UD3P and Q6600

    What kind of cooling are you using?
    __________________
    GA-P67A-UD4-B3(v1.1) - F4 BIOS
    Intel Core i5-2500K - Corsair H50 p/p
    Mushkin Blackline DDR3-1600 @ 9-9-9-24 1.35v
    OCZ Vertex 2 60GB 34nm SSD - Maxtor 320GB
    Gigabyte GTX 460 SuperOverclock 1GB
    Corsair TX650W PSU
    Windows 7 HP 64-bit - SP1
    Antec 300 Case - Maxed out fans

    "The files are IN the computer ... It's SO SIMPLE!"

  9. #9
    Join Date
    Jan 2009
    Posts
    11

    Default Re: Unable to OC UD3P and Q6600

    Quote Originally Posted by SeanDude05 View Post
    What kind of cooling are you using?
    For now the stock heatsink that came with my q6600, until the one i ordered comes in.

  10. #10
    Join Date
    Jan 2009
    Location
    Colorado, USA
    Posts
    88

    Default Re: Unable to OC UD3P and Q6600

    I wouldn't attempt to do any OC until you get aftermarket cooling on that quad-core. What temps are you seeing?
    __________________
    GA-P67A-UD4-B3(v1.1) - F4 BIOS
    Intel Core i5-2500K - Corsair H50 p/p
    Mushkin Blackline DDR3-1600 @ 9-9-9-24 1.35v
    OCZ Vertex 2 60GB 34nm SSD - Maxtor 320GB
    Gigabyte GTX 460 SuperOverclock 1GB
    Corsair TX650W PSU
    Windows 7 HP 64-bit - SP1
    Antec 300 Case - Maxed out fans

    "The files are IN the computer ... It's SO SIMPLE!"

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •