Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: ep45-dq6 e8400 4GB-1066 oc results




  1. #1
    Join Date
    Jan 2009
    Posts
    4

    Default ep45-dq6 e8400 4GB-1066 oc results

    Hi my as-5 hasnt even burnt in yet(temps still coming down) and i have a achived a 24hr small fft stable 4GHz oc, i still could tweak the vcore and mch down abit probly and push the ram up (is it worth the extra heat on a divider)

    775 and gigabyte virgin just come form a dfi 939 system

    air cooled with a xp-120 and 3 120mm case fans and 1 140mm case fan (2 in 2 out)

    tell me what you think about temps voltage and settings please anyone

    prime running
    ImageShack - Image Hosting :: prime95smallrunqb7.jpg
    prime 25hr finished
    ImageShack - Image Hosting :: prime95smallfin25hrhy4.jpg
    core damage max heat after stress test
    ImageShack - Image Hosting :: coredamgeheatba0.jpg

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 4.00GHz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 445
    PCI Express Frequency (Mhz) .........: 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0


    DRAM Performance Control
    Performance Enhance...................: [standard]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [auto]
    System Memory Multiplier ..............: 2.0D
    Memory Frequency (Mhz) ..............: 890
    DRAM Timing Selectable ................: [manual]

    Standard Timing Control
    CAS Latency Time........................ 5 [Auto]
    tRCD ......................................... 5 [Auto]
    tRP'........................................... 5 [Auto]
    tRAS.......................................... 18 [Auto]

    Advanced Timing Control
    tRRD........................................... 4 [Auto]
    tWTR.......................................... 4 [Auto]
    tWR............................................ 8 [Auto]
    tRFC........................................... 68 [Auto]
    tRTP........................................... 4 [Auto]
    Command Rate (CMD) .................... 0 [Auto]

    Driving Strength Profiles
    Driving Strength ............................ [oc-1200]

    Channel A
    Static tRead Value.........................: 8 [Auto]
    tRD Phase0 Adjustment...................: 0 [Auto]
    tRD Phase1 Adjustment...................: 0 [Auto]
    tRD Phase2 Adjustment...................: 0 [Auto]
    tRD Phase3 Adjustment...................: 0 [Auto]
    Trd2rd(Different Rank)....................: 6 [Auto]
    Twr2wr(Different Rank)...................: 6 [Auto]
    Twr2rd(Different Rank)...................: 5 [Auto]
    Trd2wr(Same/Diff Rank)..................: 8 [Auto]
    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]

    Channel B
    Static tRead Value.........................: 8 [Auto]
    tRD Phase0 Adjustment...................: 0 [Auto]
    tRD Phase1 Adjustment...................: 0 [Auto]
    tRD Phase2 Adjustment...................: 0 [Auto]
    tRD Phase3 Adjustment...................: 0 [Auto]
    Trd2rd(Different Rank)....................: 6 [Auto]
    Twr2wr(Different Rank)...................: 6 [Auto]
    Twr2rd(Different Rank)...................: 5 [Auto]
    Trd2wr(Same/Diff Rank)..................: 8 [Auto]
    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]

    Motherboard Voltage Control
    CPU
    CPU Vcore….……….......1.2500........: 1.300
    (bios reads 1.284,idle windows 1.264, load 1.232-1.248)
    CPU Termination…..... 1.200V*.......: 1.200
    CPU PLL…………………....1.500V*.......: 1.500 [Auto]
    CPU Referen.…………....0.755V*.......: 0.760 [Auto]

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.200
    MCH Reference….…….0.800V...........: [Auto]
    MCH/DRAM Ref.…......0.900V...........: [Auto]
    ICH I/O……………….....1.500V............: 1.500

    DRAM
    DRAM Voltage ……....1.800V............: 2.000
    DRAM Termination .…0.900V............: [Auto]
    Channel A Reference 0.900V............: [Auto]
    Channel B Reference 0.900V............: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [disabled]
    CPU Thermal Monitor 2(TM2) ...........: [enabled]
    CPU EIST Function.........................: [disbaled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect .............. [enabled]



    seem like i have a stable oc on a v.low vcore considering it is under stock at load

  2. #2
    Chucko is offline Member
    Join Date
    Jan 2009
    Location
    6 blocks from AMD HQ
    Posts
    112

    Default Re: ep45-dq6 e8400 4GB-1066 oc results

    Nice work! Small FFT doesn't exercise the memory interface much though.

    Was the OC-1200 setting necessary to get the RAM stable? I'm struggling with DDR2-1066 on an EP45-DS3R and haven't succeeded even at speeds above 800.

  3. #3
    Join Date
    Jan 2009
    Posts
    4

    Default Re: ep45-dq6 e8400 4GB-1066 oc results

    no the oc-1200 isnt neccessary i just like to have my mem lose till i finish the job on the cpu

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •