Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: My quest to 4GHz on E8500 and UD3P




  1. #1
    Join Date
    Dec 2008
    Location
    Colorado
    Posts
    65

    Default My quest to 4GHz on E8500 and UD3P

    Hello All,

    The following settings give me a BSOD before entering Windows:
    I am using BIOS F7c
    Now, if I just change the the FSB to 400 and manualy enter my RAM timings and keep everything else on auto. I can boot into Windows and am prime stable for 3 hours...?
    What do you think?
    There are so many variables.


    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: FAST    
    CPU Clock Ratio .......................: 9   
    Fine CPU Clock Ratio...................: 0.5   
    CPU Frequency .........................: 3.80GHz (400X9.5)
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]   
    CPU Host Frequency (Mhz) ..............: 400   
    PCI Express Frequency (Mhz) ...........: 100   
    C.I.A.2 ...............................: [Disabled]
     
    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV 
    PCI Express Clock Drive................: 900mV 
    CPU Clock Skew (ps)....................: 0ps 
    MCH Clock Skew (ps)....................: 0ps 
     
    DRAM Performance Control
    Performance Enhance....................: [STANDARD]  
    Extreme Memory Profile (X.M.P.)........: [Disabled]  
    (G)MCH Frequency Latch.................: [AUTO]
    System Memory Multiplier ..............: 2.66D   
    Memory Frequency (Mhz) ................: 1066  
    DRAM Timing Selectable ................: [Manual]
    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 5
    tRP'...................................: 5
    tRAS...................................: 15
    Advanced Timing Control
    tRRD...................................: 4
    tWTR...................................: 4
    tWR....................................: 5 
    tRFC...................................: 62 
    tRTP...................................: 4
    Command Rate (CMD) ....................: 2
    Driving Strength Profiles
    Driving Strength ......................: 1066
    Channel A
    Static tRead Value.....................: 10
    tRD Phase0 Adjustment..................: 0 [AUTO]
    tRD Phase1 Adjustment..................: 0 [AUTO]
    tRD Phase2 Adjustment .................: 0 [AUTO]
    tRD Phase3 Adjustment..................: 0 [AUTO]
    Trd2rd(Different Rank).................: 8 [AUTO] 
    Twr2wr(Different Rank).................: 8 [AUTO] 
    Twr2rd(Different Rank).................: 7 [AUTO] 
    Trd2wr(Same/Diff Rank).................: 9 [AUTO] 
    Dimm1 Clock Skew Control...............: [AUTO]
    Dimm2 Clock Skew Control...............: [AUTO]
    DDR Write Training.....................: [AUTO]
    Channel B
    Static tRead Value.....................: 10
    tRD Phase0 Adjustment..................: 0 [AUTO]
    tRD Phase1 Adjustment..................: 0 [AUTO]
    tRD Phase2 Adjustment .................: 0 [AUTO]
    tRD Phase3 Adjustment..................: 0 [AUTO]
    Trd2rd(Different Rank).................: 8 [AUTO] 
    Twr2wr(Different Rank).................: 8 [AUTO] 
    Twr2rd(Different Rank).................: 7 [AUTO] 
    Trd2wr(Same/Diff Rank).................: 9 [AUTO] 
    Dimm1 Clock Skew Control...............: [AUTO]
    Dimm2 Clock Skew Control...............: [AUTO]
    DDR Write Training.....................: [AUTO]
     
    Motherboard Voltage Control
    CPU
    Load-Line Calibration..................: [Disabled]  
    CPU Vcore..............................: 1.250v   
    CPU Termination........................: 1.240V   
    CPU PLL................................: 1.570V  
    CPU Reference..........................: 0.760V [AUTO]   
     
    MCH/ICH
    MCH Core...............................: 1.240V   
    MCH Reference..........................: 0.760v [AUTO]  
    MCH/DRAM Ref...........................: 0.900V [AUTO]  
    ICH I/O................................: 1.570V   
    ICH Core...............................: 1.200V   
    DRAM
    DRAM Voltage...........................: 1.9v  
    DRAM Termination ......................: 0.900V [AUTO]  
    Channel A Reference....................: 0.900V [AUTO]  
    Channel B Reference ...................: 0.900V [AUTO]  
    Advanced Settings
    Limit CPUID Max. to 3..................: [Disabled]
    No-Execute Memory Protect..............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support...................: [Disabled]
    x C4/C4E State Support.................: [Disabled]
    CPU Thermal Monitor 2(TM2) ............: [Disabled]
    CPU EIST Function......................: [Disabled]
    Virtualization Technology..............: [Disabled] 
    Integrated Peripherals
    Legacy USB Storage Detect .............:[Enabled]

  2. #2

    Default Re: My quest to 4GHz on E8500 and UD3P

    lower mch reference to .70, then try lower like .68, this is with VTT seto on 1.2, then you can raise the VTT back to 1.24v

    Add more mch core, like 1.28 or maybe more like 1.32v
    New Q9650, Gigabyte UD3P, 4GB OCZ Platinum, Asus TOP 4850, Antec TP3 550W, Vista 64 SP1/XP SP3.

    http://www.cardomain.com/ride/2641801

  3. #3
    Join Date
    Dec 2008
    Location
    Colorado
    Posts
    65

    Default Re: My quest to 4GHz on E8500 and UD3P

    I will give that a try and post back this evening. Thanks for the suggestion.

    -Jason
    i7 3770K @ Stock for now F5 BIOS
    2 X 8 GB DDR3 1600MHz
    2 X 240 GB SATA 3 SSD RAID 0
    Gigabyte Z77X-Up7
    EVGA GTX 680 Classified
    EVGA GTX 285 PhysX

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •