Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 9 123 ... LastLast
Results 1 to 10 of 89

Thread: ep45-ud3p 8gb fine tweaking...




  1. #1
    Join Date
    Dec 2008
    Posts
    40

    Default ep45-ud3p 8gb fine tweaking...

    Looking for some help with "fine tweaking" on my setup. Currently am running e8400 @ 445x9 with 8gb of mushkin redline pc8000 on Win7 x64. I have my mch latch and memory multi both set to auto as that was the only way i could get the system to boot @ 4ghz.

    What I am wanting help with is possibly tweaking my voltages etc. With mch latch and memory multi set to auto it picks a 5:6 divider which sets my ram to 534mhz or 1068 ddr.

    Here is my setup right now - let me know if you see anything that stands out that I could optimize or change:

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto    
    CPU Clock Ratio .......................: 9  
    Fine CPU Clock Ratio...................: 0.0  
    CPU Frequency .........................: 4.0GHz (445X9)
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]  
    CPU Host Frequency (Mhz) ..............: 445  
    PCI Express Frequency (Mhz) ...........: 100  
    C.I.A.2 ...............................: [Disabled]
     
    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)....................: 0ps
     
    DRAM Performance Control
    Performance Enhance....................: [Turbo]  
    Extreme Memory Profile (X.M.P.)........: [Disabled]  
    (G)MCH Frequency Latch.................: [AUTO]
    System Memory Multiplier ..............: [Auto]  
    Memory Frequency (Mhz) ................: 1066  
    DRAM Timing Selectable ................: [Manual]
    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 5
    tRP'...................................: 5
    tRAS...................................: 15
    Advanced Timing Control
    tRRD...................................: 3
    tWTR...................................: 3
    tWR....................................: 4
    tRFC...................................: 52
    tRTP...................................: 3
    Command Rate (CMD) ....................: 2
    Driving Strength Profiles
    Driving Strength ......................: 1066
    Channel A
    Static tRead Value.....................: 8
    tRD Phase0 Adjustment..................:  [AUTO]
    tRD Phase1 Adjustment..................:  [AUTO]
    tRD Phase2 Adjustment .................:  [AUTO]
    tRD Phase3 Adjustment..................:  [AUTO]
    Trd2rd(Different Rank).................:  [AUTO]
    Twr2wr(Different Rank).................:  [AUTO]
    Twr2rd(Different Rank).................:  [AUTO]
    Trd2wr(Same/Diff Rank).................:  [AUTO]
    Dimm1 Clock Skew Control...............: [AUTO]
    Dimm2 Clock Skew Control...............: [AUTO]
    DDR Write Training.....................: [AUTO]
    Channel B
    Static tRead Value.....................: 8
    tRD Phase0 Adjustment..................:  [AUTO]
    tRD Phase1 Adjustment..................:  [AUTO]
    tRD Phase2 Adjustment .................:  [AUTO]
    tRD Phase3 Adjustment..................:  [AUTO]
    Trd2rd(Different Rank).................:  [AUTO]
    Twr2wr(Different Rank).................: [AUTO]
    Twr2rd(Different Rank).................:  [AUTO]
    Trd2wr(Same/Diff Rank).................:  [AUTO]
    Dimm1 Clock Skew Control...............: [AUTO]
    Dimm2 Clock Skew Control...............: [AUTO]
    DDR Write Training.....................: [AUTO]
     
    Motherboard Voltage Control
    CPU
    Load-Line Calibration..................: [Enabled]  
    CPU Vcore..............................: 1.28750v  
    CPU Termination........................: 1.20V  
    CPU PLL................................: 1.50V  
    CPU Reference..........................:  [0.71500v]  
     
    MCH/ICH
    MCH Core...............................: 1.24V  
    MCH Reference..........................:  [0.7000v]  
    MCH/DRAM Ref...........................:  [AUTO]  
    ICH I/O................................: 1.500V  
    ICH Core...............................: 1.100V  
    DRAM
    DRAM Voltage...........................: 1.92v  
    DRAM Termination ......................:  [AUTO]  
    Channel A Reference....................: [AUTO]  
    Channel B Reference ...................: [AUTO]  
    Advanced Settings
    Limit CPUID Max. to 3..................: [Disabled]
    No-Execute Memory Protect..............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support...................: [Enabled]
    x C4/C4E State Support.................: [Enabled]
    CPU Thermal Monitor 2(TM2) ............: [Enabled]
    CPU EIST Function......................: [Enabled]
    Virtualization Technology..............: [Enabled]
    Integrated Peripherals
    Legacy USB Storage Detect .............:[Enabled]
    Last edited by arctic-k20; 02-13-2010 at 03:06 AM.

  2. #2
    Join Date
    Dec 2008
    Posts
    40

    Default Re: ep45-ud3p 8gb fine tweaking...

    bump

  3. #3
    Join Date
    Feb 2010
    Location
    Pittsburgh, PA
    Posts
    55

    Default Re: ep45-ud3p 8gb fine tweaking...

    Makes it easier to read if you put your specs in BIOS template code section.

    I recommend adding the following to your template at the top:

    Motherboard: MB-REVISION-BIOS
    RAM:
    CPU:
    Power Supply Unit:

    Also a plus if you add tinyurl links to the specs of the above components
    G1.Assassin 2 (F11)
    i7 3820
    Noctua NH-D14 SE2011
    GeForce GTX 680 DirectCU II TOP
    DOMINATOR GT (4x4GB) DDR3 2133 MHz 9-11-10-27 @ 1.5V
    Sandisk Extreme 240GB / Barracuda 1TB
    Win8 Pro x64
    Corsair HX750
    HAF-X

  4. #4
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: ep45-ud3p 8gb fine tweaking...

    Looks as tweaked as it can be to me.
    Can you post a screan capture of MemSet main(click >>) and SPD (click spd) windows?
    5:6 ratio is 2.40B multiplier, you can try set it manually if you wish.

  5. #5
    Join Date
    Dec 2008
    Posts
    40

    Default Re: ep45-ud3p 8gb fine tweaking...



    Case: Coolermaster Stacker 830 SE w/ Seasonic M12D-750
    Mobo: Giga-byte EP45-UD3P rev 1.0 Bios F10E
    CPU: Intel e8400 Q832A163
    RAM: Mushkin Redline DDR2 996593 2gbx4
    Display: Dell 2405FPW
    Video: Sapphire HD5850
    Cooling: TRUE /w 2x SFF21F
    OS: Windows 7 x64


  6. #6
    Join Date
    Dec 2008
    Posts
    40

    Default Re: ep45-ud3p 8gb fine tweaking...

    I have ditched the 5:6 multi - i was getting about 1k memtest errors on test #5....so i went with a normal 1:1 and now memtest is clear.

    superpi passes on 32m but prime blend still fails after about 10mins or so...

    here is my updated bios settings in full:


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Disabled
    CPU Clock Ratio .......................: 8
    Fine CPU Clock Ratio...................: 0.0
    CPU Frequency .........................: 4.0GHz (500X8)
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 500
    PCI Express Frequency (Mhz) ...........: 101
    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [Turbo]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: [AUTO]
    System Memory Multiplier ..............: [2.00d]
    Memory Frequency (Mhz) ................: 1000
    DRAM Timing Selectable ................: [Manual]
    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 5
    tRP'...................................: 5
    tRAS...................................: 12
    Advanced Timing Control
    tRRD...................................: 3
    tWTR...................................: 3
    tWR....................................: 4
    tRFC...................................: 52
    tRTP...................................: 3
    Command Rate (CMD) ....................: 2
    Driving Strength Profiles
    Driving Strength ......................: 1066
    Channel A
    Static tRead Value.....................: 10
    tRD Phase0 Adjustment..................: [AUTO]
    tRD Phase1 Adjustment..................: [AUTO]
    tRD Phase2 Adjustment .................: [AUTO]
    tRD Phase3 Adjustment..................: [AUTO]
    Trd2rd(Different Rank).................: [AUTO]
    Twr2wr(Different Rank).................: [AUTO]
    Twr2rd(Different Rank).................: [AUTO]
    Trd2wr(Same/Diff Rank).................: [AUTO]
    Dimm1 Clock Skew Control...............: [AUTO]
    Dimm2 Clock Skew Control...............: [AUTO]
    DDR Write Training.....................: [AUTO]
    Channel B
    Static tRead Value.....................: 10
    tRD Phase0 Adjustment..................: [AUTO]
    tRD Phase1 Adjustment..................: [AUTO]
    tRD Phase2 Adjustment .................: [AUTO]
    tRD Phase3 Adjustment..................: [AUTO]
    Trd2rd(Different Rank).................: [AUTO]
    Twr2wr(Different Rank).................: [AUTO]
    Twr2rd(Different Rank).................: [AUTO]
    Trd2wr(Same/Diff Rank).................: [AUTO]
    Dimm1 Clock Skew Control...............: [AUTO]
    Dimm2 Clock Skew Control...............: [AUTO]
    DDR Write Training.....................: [AUTO]

    Motherboard Voltage Control
    CPU
    Load-Line Calibration..................: [Enabled]
    CPU Vcore..............................: 1.2750v
    CPU Termination........................: 1.26V
    CPU PLL................................: 1.50V
    CPU Reference..........................: [0.783v]

    MCH/ICH
    MCH Core...............................: 1.24V
    MCH Reference..........................: [0.758v]
    MCH/DRAM Ref...........................: [AUTO]
    ICH I/O................................: 1.500V
    ICH Core...............................: 1.100V
    DRAM
    DRAM Voltage...........................: 2.00v
    DRAM Termination ......................: [AUTO]
    Channel A Reference....................: [AUTO]
    Channel B Reference ...................: [AUTO]
    Advanced Settings
    Limit CPUID Max. to 3..................: [Disabled]
    No-Execute Memory Protect..............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support...................: [Enabled]
    x C4/C4E State Support.................: [Enabled]
    CPU Thermal Monitor 2(TM2) ............: [Enabled]
    CPU EIST Function......................: [Enabled]
    Virtualization Technology..............: [Enabled]
    Integrated Peripherals
    Legacy USB Storage Detect .............:[Enabled]
    Last edited by arctic-k20; 02-18-2010 at 05:45 AM.


    Case: Coolermaster Stacker 830 SE w/ Seasonic M12D-750
    Mobo: Giga-byte EP45-UD3P rev 1.0 Bios F10E
    CPU: Intel e8400 Q832A163
    RAM: Mushkin Redline DDR2 996593 2gbx4
    Display: Dell 2405FPW
    Video: Sapphire HD5850
    Cooling: TRUE /w 2x SFF21F
    OS: Windows 7 x64


  7. #7
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: ep45-ud3p 8gb fine tweaking...

    Check your FSB, and ram tab of CPU-Zm not sure what is going on, MemSet report ram to run as DDR-600(300 MHz)

  8. #8
    Join Date
    Dec 2008
    Posts
    40

    Default Re: ep45-ud3p 8gb fine tweaking...

    intel speed step i think


    Case: Coolermaster Stacker 830 SE w/ Seasonic M12D-750
    Mobo: Giga-byte EP45-UD3P rev 1.0 Bios F10E
    CPU: Intel e8400 Q832A163
    RAM: Mushkin Redline DDR2 996593 2gbx4
    Display: Dell 2405FPW
    Video: Sapphire HD5850
    Cooling: TRUE /w 2x SFF21F
    OS: Windows 7 x64


  9. #9
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: ep45-ud3p 8gb fine tweaking...

    SpeedStep does not change bus frequency.
    Does the machine boot at first attempt and do you get a red warning when entering BIOS M.I.T?

  10. #10
    Join Date
    Dec 2008
    Posts
    40

    Default Re: ep45-ud3p 8gb fine tweaking...

    machine boots fine...here i will take a cpu-z screen pic...


    Case: Coolermaster Stacker 830 SE w/ Seasonic M12D-750
    Mobo: Giga-byte EP45-UD3P rev 1.0 Bios F10E
    CPU: Intel e8400 Q832A163
    RAM: Mushkin Redline DDR2 996593 2gbx4
    Display: Dell 2405FPW
    Video: Sapphire HD5850
    Cooling: TRUE /w 2x SFF21F
    OS: Windows 7 x64


Page 1 of 9 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •