Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Questions with OC GA-EP45-DQ6




  1. #1
    Join Date
    Dec 2008
    Posts
    17

    Default Questions with OC GA-EP45-DQ6

    <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    <o:p>New buiild. See second thread for specs.. Current settings below. Questions include should the drive strength profile in both channel A & B be increased to 1066 or 1333? Is there an advantage to the (G)MCH being 333 rather than 400? I kept it at 333 to allow me to increase the bus speed. Is there a reason to lower the clock multiplier below 10 or just increase the host frequency?</o:p>
    <o:p>The temps of the core#1 at idle are 37, core #2 35. Running Everest Lvalays stability test for 2 hours the system was stable with core#1 40, core #2 39.</o:p>
    <o:p>Do I gain benefit to increasing the host frequency. I like to play COD4 single player. May try several other games. Rest of use is financial and gemeral information use.</o:p>
    <o:p>Thanks.</o:p>
    <o:p>Paul</o:p>
    <o:p></o:p>


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto


    </PRE>

    CPU Clock Ratio 10<o:p></o:p>


    </PRE>

    Fine CPU Clock Ratio.....................:.0<o:p></o:p>


    </PRE>

    CPU Frequency ...........................: 4.000<o:p></o:p>


    </PRE>

    Clock Chip Control <o:p></o:p>


    </PRE>

    Standard Clock Control<o:p></o:p>


    </PRE>

    CPU Host Clock Control..................: [Enabled] <o:p></o:p>


    </PRE>

    CPU Host Frequency (Mhz) ............: 400<o:p></o:p>


    </PRE>

    PCI Express Frequency (Mhz) .........: 100


    </PRE>

    C.I.A.2 .................................:[Disabled]<o:p></o:p>


    </PRE>

    Advanced Clock Control [Press Enter]<o:p></o:p>


    </PRE>

    CPU Clock Drive...........................: <<< 800<o:p></o:p>


    </PRE>

    PCI Express Clock Drive.................: <<< 900<o:p></o:p>


    </PRE>

    CPU Clock Skew (ps)....................: <<< <o:p></o:p>


    </PRE>

    MCH Clock Skew (ps)...................: <<< <o:p></o:p>


    </PRE>

    DRAM Performance Control<o:p></o:p>


    </PRE>

    Performance Enhance...................: [STANDARD]<o:p></o:p>


    </PRE>

    Extreme Memory Profile (X.M.P.).....: Disabled<o:p></o:p>


    </PRE>

    (G)MCH Frequency Latch...............: 333<o:p></o:p>


    </PRE>

    System Memory Multiplier ..............: 2.40B<o:p></o:p>


    </PRE>

    Memory Frequency (Mhz) ..............: 980<o:p></o:p>


    </PRE>

    DRAM Timing Selectable ................: [Manual]<o:p></o:p>


    </PRE>

    Standard Timing Control<o:p></o:p>


    </PRE>

    CAS Latency Time........................5<o:p></o:p>


    </PRE>

    tRCD .........................................5<o:p></o:p>


    </PRE>

    tRP'...........................................5<o :p></o:p>


    </PRE>

    tRAS..........................................15<o :p></o:p>


    </PRE>

    Advanced Timing Control<o:p></o:p>


    </PRE>

    tRRD...........................................4<o :p></o:p>


    </PRE>

    tWTR..........................................4<o: p></o:p>


    </PRE>

    tWR............................................8<o :p></o:p>


    </PRE>

    tRFC...........................................68< o:p></o:p>


    </PRE>

    tRTP...........................................4<o :p></o:p>


    </PRE>

    Command Rate (CMD) ....................:2<o:p></o:p>


    </PRE>

    Driving Strength Profiles<o:p></o:p>


    </PRE>

    Driving Strength ............................AUTO for A & B. ? should I increase to OC1333<o:p></o:p>


    </PRE>

    Channel A<o:p></o:p>


    </PRE>

    Static tRead Value.........................:8<o:p></o:p>


    </PRE>

    tRD Phase0 Adjustment...................:0<o:p></o:p>


    </PRE>

    tRD Phase1 Adjustment...................:Auto<o:p></o:p>


    </PRE>

    tRD Phase2 Adjustment .................:Auto<o:p></o:p>


    </PRE>

    tRD Phase3 Adjustment..................:Auto<o:p></o:p>


    </PRE>

    Trd2rd(Different Rank)....................8 <o:p></o:p>


    </PRE>

    Twr2wr(Different Rank)...................:8<o:p></o:p>


    </PRE>

    Twr2rd(Different Rank)...................:7 <o:p></o:p>


    </PRE>

    Trd2wr(Same/Diff Rank)..................:9<o:p></o:p>


    </PRE>

    Dimm1 Clock Skew Control...............:Auto <o:p></o:p>


    </PRE>

    Dimm2 Clock Skew Control...............:Auto <o:p></o:p>


    </PRE>

    Static tRead Value.........................:8<o:p></o:p>


    </PRE>

    tRD Phase0 Adjustment...................:<<< 1<o:p></o:p>


    </PRE>

    tRD Phase1 Adjustment.................0..:Auto<o:p></o:p>


    </PRE>

    tRD Phase2 Adjustment ...............0.:Auto<o:p></o:p>


    </PRE>

    tRD Phase3 Adjustment................0..:Auto<o:p></o:p>


    </PRE>

    Trd2rd(Different Rank)................8....:Auto <o:p></o:p>


    </PRE>

    Twr2wr(Different Rank)................8...:Auto <o:p></o:p>


    </PRE>

    Twr2rd(Different Rank)................7...:Auto <o:p></o:p>


    </PRE>

    Trd2wr(Same/Diff Rank)................9..:Auto <o:p></o:p>


    </PRE>

    Dimm1 Clock Skew Control...............:Auto ps<o:p></o:p>


    </PRE>

    Dimm2 Clock Skew Control...............:Auto ps<o:p></o:p>


    </PRE>

    DDR Write Training Auto<o:p></o:p>


    </PRE>

    Motherboard Voltage Control<o:p></o:p>


    </PRE>

    Voltage Type.………... Manual<o:p></o:p>


    </PRE>

    CPU <o:p></o:p>


    </PRE>

    CPU Vcore….……….........................:1.100 1.220V<o:p></o:p>


    </PRE>

    CPU Termination…..... 1.200V*.......: <<< 1.200v<o:p></o:p>


    </PRE>

    CPU PLL…………………....1.500V*.......: << 1.5v<o:p></o:p>


    </PRE>

    CPU Referen.…………....0.755V*.......: <<< . Auto <o:p></o:p>


    </PRE>

    CPU Reference2………,,0.800V*.......:<<< .Auto


    </PRE>

    MCH/ICH<o:p></o:p>


    </PRE>

    MCH Core…………….....1.100V...........: 1.220V<o:p></o:p>


    </PRE>

    MCH Reference….…….0.76V...........; <<< L.805v<o:p></o:p>


    </PRE>

    MCH/DRAM Ref.…......0.900V...........: <<<?XML:NAMESPACE PREFIX = Auto<o /><Auto<o:p>


    </PRE>

    ICH I/O……………….....1.50V............: <<< Auto<o:p></o:p>


    </PRE>

    DRAM<o:p></o:p>


    </PRE>

    DRAM Voltage ……....1.800V............: 2.060v (Reads 2.096 on CPUIZ)<o:p></o:p>


    </PRE>

    DRAM Termination .…0.900V............: <<< Auto<o:p></o:p>


    </PRE>

    Channel A Reference 0.900V............: <<< Auto<o:p></o:p>


    </PRE>

    Channel B Reference 0.900V............: <<< Auto<o:p></o:p>


    </PRE>

    Advanced Settings<o:p></o:p>


    </PRE>

    Limit CPUID Max. to 3.....................: [Disabled]<o:p></o:p>


    </PRE>

    No-Execute Memory Protect............: [Enabled]<o:p></o:p>


    </PRE>

    CPU Enhanced Halt (C1E)................: Enabled<o:p></o:p>


    </PRE>

    C2/C2E State Support....................: Enabled<o:p></o:p>


    </PRE>

    x C4/C4E State Support..................: [Enabled <o:p></o:p>


    </PRE>

    CPU Thermal Monitor 2(TM2) ...........: [Enabled]<o:p></o:p>


    </PRE>

    CPU EIST Function.........................: [Disabled]<o:p></o:p>


    </PRE>

    Virtualization Technology................: [Disabled]


    </PRE>

    Integrated Peripherals<o:p></o:p>


    </PRE>
    Legacy USB Storage Detect ..............[Enabled<o:p></o:p>
    </Auto<o:p>

  2. #2
    Join Date
    Dec 2008
    Posts
    17

    Default Re: Questions with OC GA-EP45-DQ6

    New build with following specs:
    Case: ANTEC 1200 (Three 120 mm front and two 120 MM rear plus 200 mm top fans)
    PSU: Corsair HX1000W
    MB: GIGABYTE GA-EP45-DQ6 v1.0. Bios F12
    CPU: INTEL E8600 3.33 GHz Wolfdale. Eo Stepping
    COOLER: THERMALRIGHT 12O mm Ultra Extreme (TRUE) Lapped, Scythe S-FLEX SFF223F
    Memory: CORSAIR DOMINATOR 4GB (2X2GB) DDR2 1066 PC 8500C5DF
    5-5-5-15 2T. Cooled with Corsair memory cooler
    HD: SEAGATE BARRACUDA 7200.22 SATA 1TB X 2. RAID 1
    VIDEO: ASUS EAH4870 DK/HTDI/1GD5
    DVD BURNER: SAMSUNG 22X SATA SH-S223F
    BLU-RAY READER: PIONEER Blu-Reader SATA BDC-2202
    OS: VISTA ULTIMATE 64bit

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •