Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: Need stable config for GA-EP45-UD3P, Q99550, Mushkin XP2 8500




  1. #1
    Join Date
    Jan 2009
    Posts
    3

    Default Need stable config for GA-EP45-UD3P, Q99550, Mushkin XP2 8500

    I've been unable to arrive at a bios configuration that will POST or boot at 1066 dual channel with the following rig...

    Mobo: Gigabyte GA-EP45-UD3P
    Rev 1.0
    Bios: F6
    S/N: 084940007503
    CPU: Intel Q9550 2.83ghz
    CPU Cooler: MassCool 8WA741 92mm Ball
    VGA: SAPPHIRE 100265L Radeon HD 4830
    Memory: DDR2 Mushkin 2x2GB XP2 8500 1066 (996619)
    PSU: Thermaltake 650w

    POSTs/boots/runs stable at 800 dual channel with all bios settings on auto except DRAM voltage set to 2.00v as per mushkin instruction.

    Both modules run just fine individually at 1066 in single module, single channel mode with stock/auto +2.0vDRAM settings.

    Can anyone give me a complete, explicit listing of bios settings I should use for a stable config from which to start 1066 dual channel?

  2. #2
    Join Date
    Jan 2009
    Posts
    3

    Default Re: Need stable config for GA-EP45-UD3P, Q99550, Mushkin XP2 8500

    Just bumping in hopes of some help.

  3. #3
    Join Date
    Jan 2009
    Location
    Madrid, Spain
    Posts
    23

    Default Re: Need stable config for GA-EP45-UD3P, Q99550, Mushkin XP2 8500

    Search in the forum for any thread with recommended settings for 2x2GB of memory.
    You'll probably need to set manually MCH Core voltage, tRFC and Static tRead, instead of using auto settings.

  4. #4
    Join Date
    Jan 2009
    Posts
    4

    Default Re: Need stable config for GA-EP45-UD3P, Q99550, Mushkin XP2 8500

    Is anybody having success running 2 2 GB sticks (4GB Total) at 1066 mhz on this motherboard? Is anybody with this configuration able to run with default bios settings?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •