Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 9 FirstFirst 1234 ... LastLast
Results 11 to 20 of 88

Thread: Some help please




  1. #11
    Join Date
    Feb 2004
    Posts
    50

    Default Re: Some help please

    Did you notice the search page?

  2. #12
    Join Date
    Jan 2009
    Posts
    53

    Default Re: Some help please

    Quote Originally Posted by ill View Post
    Did you notice the search page?
    Hallo ill,

    Yes I did.

    But I just asked because I couldn't find someone with same specs (same mobo and cpu but not ram for example)

    I'm gonna try to take a little overclock!

    Thanks for the links and help for now...

    GreetzzZ,

    killman

  3. #13
    Join Date
    Jan 2009
    Posts
    53

    Default Re: Some help please

    Hi all,

    Tried an overclock, but went wrong... got an error that Vista couldn't load boot files... :S

    Too bad..
    So I had a format and now got an overclock of 3,4GHz (I know not much) but I tried.. and for the first time .

    http://img504.imageshack.us/img504/9674/test0lq5.jpg My results so far.

    The last time I tried to go further with a higher overclock it went wrong.. Anyone know how that could happen?

    My fault by setting a value wrong?

    What do I need to change now? :)

    Looking forward to a reply .

    NEVER MIND.. TOO MUCH PROBLEMS, thanks anyway!

    Greetings,

    killman
    Last edited by killman; 02-03-2009 at 05:06 AM.

  4. #14
    Join Date
    Feb 2004
    Posts
    50

    Default Re: Some help please

    killman,

    Did you just jump to 3.4GHz or did you start small? Can you locate a template and kind of fill it in with your current BIOS settings?

    Don't read into this, but I'm better at setting up my own. I'll try to help any way that I can. There may come a time when someone else may have to jump in.
    Last edited by ill; 02-03-2009 at 06:43 AM.

  5. #15
    Join Date
    Feb 2004
    Posts
    50

    Default Re: Some help please

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:
    CPU Clock Ratio ..........................:
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................:


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<<
    PCI Express Clock Drive.................: <<<
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............:
    Memory Frequency (Mhz) ..............:
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................

    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................

    Channel A
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above)
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above)

    MCH/ICH
    MCH Core…………….....1.100V...........: <<
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............:
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  6. #16
    Join Date
    Feb 2004
    Posts
    50

  7. #17
    Join Date
    Jan 2009
    Posts
    53

    Default Re: Some help please

    Hi ill,

    Yes I read those .

    What do you mean by 'leave with some voltage settings? auto/normal.. something else?

    And no I didn't go to right the 3,4GHz.. I did this in steps of 10.

    Greetings,

    killman

  8. #18
    Join Date
    Dec 2008
    Location
    Denver
    Posts
    56

    Default Re: Some help please

    I also have 2 sets of the same memory you have. If you run both sets it will probably be best to run at 1:1. If I pull one set I can run higher but I think it's because the memory controller (MCH) has a tougher time with all 4 slots populated.
    Q9550 EO 4.0ghz 475x8.5 1.325v LLC on
    Gigabyte EP45-UD3P f9c OCZ Vendetta2 w/bolt kit
    4x2gb OCZ PC2 8500 5-6-6-18 1.9v @950mhz
    Asus 4870 512 Scythe Musashi
    Ocz Gamextream 600w
    2x300gb Velociraptors RAID0
    CoolerMaster Stacker 830
    Dynex 32" HDTV on HDMI
    Vista Premium 64-bit

  9. #19
    Join Date
    Jan 2009
    Posts
    53

    Default Re: Some help please

    Quote Originally Posted by Prospector View Post
    I also have 2 sets of the same memory you have. If you run both sets it will probably be best to run at 1:1. If I pull one set I can run higher but I think it's because the memory controller (MCH) has a tougher time with all 4 slots populated.
    Thank you for the reply!

    How do you mean higher? higher value of MHz of the memory?

    Greetings,

    killman

  10. #20
    Join Date
    Jan 2009
    Posts
    53

    Default Re: Some help please

    Hi all,

    Tried it again, but I can't get it stable.. everytime an BSOD when I try to start the system...
    Triend with this settings:

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: ?
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 400x9 (400x9=3,6GHz)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 400Mhz
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< ?
    PCI Express Clock Drive.................: <<< ?
    CPU Clock Skew (ps)....................: <<< ?
    MCH Clock Skew (ps)...................: <<< ?


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: ?
    Memory Frequency (Mhz) ..............: ?
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 4
    tRP'........................................... 4
    tRAS.......................................... 15

    Advanced Timing Control
    tRRD........................................... 3
    tWTR.......................................... 3
    tWR............................................ 4
    tRFC........................................... 45
    tRTP........................................... 3
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................

    Channel A
    Static tRead Value.........................:7-10 >?
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7-10 >?
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: ~1.3V
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above)
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above)

    MCH/ICH
    MCH Core…………….....1.100V...........: << ?
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.1V
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Enabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]


    These are the settings I tried. Wich settings is wrong? Or wich one make the BSOD pop up when I start the System??

    About the ?: Wich settings do I have to set here? Can someone recommend a setting that would work? Or do I have to try more than one setting?

    Thanks so far for the help. It's great I can relay on people who have more experiance in overclocking and trying to help me.

    I hope to hear a quick respone soon! So I can try a little bit more and have an faster machine and an stable overclock.

    Greetings and thanks,

    killman

Page 2 of 9 FirstFirst 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •