Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 7 of 9 FirstFirst ... 56789 LastLast
Results 61 to 70 of 88

Thread: Some help please




  1. #61
    Join Date
    Jan 2009
    Posts
    53

    Default Re: Some help please

    Hi MrGav,

    Hehe, I like a happy ending too. Would be great!

    Maybe then I can help also..

    Regards,

    killman

  2. #62
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Some help please

    Ya, you can try 8-9 tRD on the 400/D strap. Did you ever try to use 2.00B as your ram multi instead of 2.00D? If you can get that going you can use 6-7 tRD likely

    Cooling doesn't matter much at all, we are just talking memory here and possibly NB temps

    I would raise tWR and tRAS for now to 15 (tRAS) and 6 (tWR) and then see if you can lower tRD or try running the 2.00B Multi. Keep in mind, with either you may need to use less or more MCH Voltages

  3. #63
    Join Date
    Jan 2009
    Posts
    53

    Default Re: Some help please

    Quote Originally Posted by Lsdmeasap View Post
    Ya, you can try 8-9 tRD on the 400/D strap. Did you ever try to use 2.00B as your ram multi instead of 2.00D? If you can get that going you can use 6-7 tRD likely

    Cooling doesn't matter much at all, we are just talking memory here and possibly NB temps

    I would raise tWR and tRAS for now to 15 (tRAS) and 6 (tWR) and then see if you can lower tRD or try running the 2.00B Multi. Keep in mind, with either you may need to use less or more MCH Voltages
    Hi Lsdmeasap,

    Thank you for the reply. I waited and now I go to try!!

    No I haven't tried 2.00B. I will do that and I already changed tRAS to 15 and will leave that on 15. I will change 2.00B and tWR to 6.

    Again thanks! I will posts results later..

    Regards,

    killman

  4. #64
    Join Date
    Jan 2009
    Posts
    53

    Default Re: Some help please

    Hi,

    Just tried these settings:

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 446 (466x9 = 4.0GHz)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 466Mhz
    PCI Express Frequency (Mhz) .........:100MHz

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 0
    MCH Clock Skew (ps)...................: <<< 0


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: Auto
    System Memory Multiplier ..............: 2.00B
    Memory Frequency (Mhz) ..............: Auto
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 15

    Advanced Timing Control
    tRRD........................................... 3
    tWTR.......................................... 3
    tWR............................................ 6
    tRFC........................................... 3
    tRTP........................................... 3
    Command Rate (CMD) ....................:2


    Channel A
    Static tRead Value.........................: 10 >Tried 8
    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment...................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank)....................: Auto
    Twr2wr(Different Rank)...................: Auto
    Twr2rd(Different Rank)...................: Auto
    Trd2wr(Same/Diff Rank)..................: Auto
    Dimm1 Clock Skew Control...............: Auto ps
    Dimm2 Clock Skew Control...............: Auto ps

    Channel B
    Static tRead Value.........................: 10 >Tried 8
    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.35V
    CPU Termination…..... 1.200V*.......: 1.2V
    CPU PLL…………………....1.500V*.......: 1.57V
    CPU Referen.…………....0.755V*.......: <<< Same
    CPU Reference2………,,0.800V*.......: <<< Same

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.26V >Tried 1.3V (What's the max?)
    MCH Reference….…….0.800V...........; <<< Same
    MCH/DRAM Ref.…......0.900V...........: <<< Same
    ICH I/O……………….....1.550V............: <<< Same
    ICH Core…………...……1.100V............: <<< Same

    DRAM
    DRAM Voltage ……....1.800V............: 2.1V
    DRAM Termination .…0.900V............: <<< Same
    Channel A Reference 0.900V............: <<< Same
    Channel B Reference 0.900V............: <<< Same


    Again the computer wouldn't boot...

    What/wich setting(s) needs a change..

    Again thanks in advance!!

    Regards,

    killman
    Last edited by killman; 03-09-2009 at 04:20 AM.

  5. #65
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Some help please

    I would first try less MCH voltage with the above settings, or more VTT and less/more MCH.

    Then if you have no luck raise the tRD and then use 2.00D multi as the 2.00B multi may or may not work with that ram/amount

  6. #66
    Join Date
    Jan 2009
    Posts
    53

    Default Re: Some help please

    Quote Originally Posted by Lsdmeasap View Post
    I would first try less MCH voltage with the above settings, or more VTT and less/more MCH.

    Then if you have no luck raise the tRD and then use 2.00D multi as the 2.00B multi may or may not work with that ram/amount
    Ok thanks, I gonna try that. One last question before I do this.. What's the max for the VTT (before I blow things up :P)

    Regards,

    killman

  7. #67
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Some help please

    Max Vtt would be 1.4-1.45, but for sure is not needed in this case. Always keep under Vcore

    I think 1.24-1.34 should be fine for your FSB, higher is not always better either so dont start at the top

  8. #68
    Join Date
    Jan 2009
    Posts
    53

    Default Re: Some help please

    Quote Originally Posted by Lsdmeasap View Post
    Max Vtt would be 1.4-1.45, but for sure is not needed in this case. Always keep under Vcore

    I think 1.24-1.34 should be fine for your FSB, higher is not always better either so dont start at the top
    Hi,

    Thanks for giving numbers, but again wouldn't boot. I tried 1.24-1.32V max. for VTT and for Memory 2.00B and 2.00D. With a tRead value of 8 the computer wouldn't boot and the CMOS reset.... Put everything maually again, but that are the old values..

    Regards,

    killman

  9. #69
    Join Date
    Jan 2009
    Posts
    53

    Default Re: Some help please

    Hi again,

    I was thinking... I will let the tRD (tRead) at 10. I think it is very hard to get a lower value with 8GB.

    But is it possible to get faster MHz of the RAM? or wouldn't give that a performance boost..?

    Regards,

    killman

  10. #70
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Some help please

    You may need 1.35 MCH or so for 8GB if you want a low tRD, just depends on the strap and multi you are using really.

    Ya faster would give better performance, but maybe not so much as lower tRD. What full settings are you trying now that fail?

Page 7 of 9 FirstFirst ... 56789 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •